UTES

  • REAL WOMEN DRIVE 4x4S

    To fit around standard size Aussie Plates (37cm x 13cm) High quantity injection moulded plastic frames in Black,with wording on bottom ...Please note that fonts may vary slightly from batch to batch

  • REAL MEN DRIVE UTES

    Size : 375mm X 138 mm ...Please note that fonts may vary slightly from batch to batch

  • REAL MEN DRIVE 4X4’S

    To fit around standard size Aussie Plates (37cm x 13cm) High quantity injection moulded plastic frames in Black, with wording on bottom ...Please note that fonts may vary slightly from batch to batch

  • R UTE D

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • ONE TONNER

    The ONE TONNER novelty number plate refers to a cab chassis ute. The most famous was produced by Holden, the Australian subsidiary of General Motors (GM) between 1971 and 1984, and again between 2003 and 2005.This plate is available as ONE TONNER or just TONNERDixie’s embossed Aussie size plates are made in Australia and measure 37cm x 13cm – the same as a standard size ‘real’ number plate. The Aussie manufacturer is the very same company that makes the ‘real’ plates, and they have been producing and selling quality Novelty Number Plates for many years. The plates look the same as those on a normal vehicle, and have embossed characters and an embossed border. They can be hung inside or outside and each is pre-drilled so ready to hang and would look very nice framed. Each Aussie SUPER DAD is supplied in a clear plastic sleeve with a hanging display card affixed so they are ready for in-store display. We sell for a great price and offer a wide variety so get yours today! For protection in delivery each has extra packing materials to ensure they arrive in tip-top condition

  • My V8 Ute

    Aussie plates are available in a variety of colour combinations – what is shown here is our standard stocked item Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

  • I LOVE THIS SET OF WHEELS

    Photo insert plates are an exciting new development in Dixies range of Novelty Number Plates allowing your favourite car photo to be displayed. The photo insert pocket measures 62 x 80 mm (2.4 x 3.4 inches)This plate is standard USA size measuring 12 x 6in (30 x 15cm) and is a non-embossed flat product.Its anticipated to take first deliveries of stock around Monday Oct 22nd in time for Christmas gifts. We are taking advance ordersWe carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang themWe sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements 

  • HOLDEN FJ UTE

    The HOLDEN FJ UTE. The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 to 1957. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX". The sedan, in Standard, Business and Special trim levels, and a coupe utility were announced in October 1953 and were followed by a Panel van derivative in December of that year. A wagon prototype was built but the bodystyle was not put into production. In 1954, Holden's first exports began with sales of the FJ in New Zealand. The FJ, of monocoque construction, broadly followed the silhouette of its predecessor, but featured a bolder horizontal styled front grille, along with comfort and decoration upgrades in a new sedan model named the 'Holden Special'. Originally specified as 60 bhp (45 kW) achieved at 3,800 rpm, the claimed maximum power output from the six-cylinder engine was increased to 65 bhp (48 kW) achieved at 4,000 rpm. In 1955 the car underwent a mild interior facelift for the Holden Special sedan, along with a variation in paint and trim options. The FJ series was progressively replaced by models from the Holden FE series from July 1956 to May 1957 with a total of 169,969 examples produced. There are nearly 20 specific FX-FJ Holden Car Clubs of Australia with members committed to preserving these iconic Holdens. These clubs organise a national gathering for FX-FJ Holden enthusiasts every second year. The plate measures 12 x 6in (30 x 15cm) and is a lightly embossed product. We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HER UTE

    Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • GET UTED

    Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • FOUR X FOUR (4×4) – Red on Black

    This US import Dixie Novelty Number Plates measures 12 x 6in (30 x 15cm) and is a lightly embossed productWe carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage  bar  rec room  games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements.

  • HOLDEN FJ UTE

    The HOLDEN FJ UTE. The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 to 1957. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX". The sedan, in Standard, Business and Special trim levels, and a coupe utility were announced in October 1953 and were followed by a Panel van derivative in December of that year. A wagon prototype was built but the bodystyle was not put into production. In 1954, Holden's first exports began with sales of the FJ in New Zealand. The FJ, of monocoque construction, broadly followed the silhouette of its predecessor, but featured a bolder horizontal styled front grille, along with comfort and decoration upgrades in a new sedan model named the 'Holden Special'. Originally specified as 60 bhp (45 kW) achieved at 3,800 rpm, the claimed maximum power output from the six-cylinder engine was increased to 65 bhp (48 kW) achieved at 4,000 rpm. In 1955 the car underwent a mild interior facelift for the Holden Special sedan, along with a variation in paint and trim options. The FJ series was progressively replaced by models from the Holden FE series from July 1956 to May 1957 with a total of 169,969 examples produced. There are nearly 20 specific FX-FJ Holden Car Clubs of Australia with members committed to preserving these iconic Holdens. These clubs organise a national gathering for FX-FJ Holden enthusiasts every second year. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHICKS UTE

    Our CHICKS UTE novelty plate is a standard size 37cm x 13cm aluminium plate with embossed main characters. It comes in a choice of colours and can either be CHICK or CHICKS.Please select your preference from the drop down menu Every respectable UTE MUSTER will have a 'Best Chicks Ute' category - see a typical example below - a 1995 Holden Commodore Ute taking part in the eighth annual Albion Park Ute Show. They are extremely high quality, durable and long lasting and we are proud to say Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The CHICKS UTE novelty plates can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

  • BEAUT UTE

    Aussie plates are available in a variety of colour combinations – what is shown here is our standard stocked item Manufacture of plates with mixed case characters is discontinued early 2012,so please check to see if we have them in stock - will endeavour to pull them down off website once sold out. Single case alternate is shownExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

  • BAD GIRLS DRIVE BAD TOYS

    This US import Dixie Novelty Car Plate measures 12in x 6in or 30cm x 15cm. We carry only the highest quality License Plates and Signs that are manufactured. Some are lightly embossed and some are flat products and all these fun and unique designs are sure to generate lots of fun conversation! Made from lightweight aluminium for durability and can be put anywhere even outside. Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements

  • BAD BOYS DRIVE BAD TOYS

    This US import Dixie Novelty Car Plate measures 12in x 6in or 30cm x 15cm. We carry only the highest quality License Plates and Signs that are manufactured.Some are lightly embossed and some are flat products and all these fun and unique designs are sure to generate lots of fun conversation! Made from lightweight aluminium for durability and can be put anywhere even outside.Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements"

  • AUSSIE MEN DRIVE UTES

    To fit around standard size Aussie Plates (37cm x 13cm) High quantity injection moulded plastic frames in Black,with wording on bottom ...Please note that fonts may vary slightly from batch to batch