Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
HOLDEN FJ UTE
$21.95 $4.00
You Save $17.95 off RRP
The HOLDEN FJ UTE. The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 to 1957. The FJ was the second model of an “all Australian car” manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the “FX”. The sedan, in Standard, Business and Special trim levels, and a coupe utility were announced in October 1953 and were followed by a Panel van derivative in December of that year. A wagon prototype was built but the bodystyle was not put into production. In 1954, Holden’s first exports began with sales of the FJ in New Zealand. The FJ, of monocoque construction, broadly followed the silhouette of its predecessor, but featured a bolder horizontal styled front grille, along with comfort and decoration upgrades in a new sedan model named the ‘Holden Special’. Originally specified as 60 bhp (45 kW) achieved at 3,800 rpm, the claimed maximum power output from the six-cylinder engine was increased to 65 bhp (48 kW) achieved at 4,000 rpm.
In 1955 the car underwent a mild interior facelift for the Holden Special sedan, along with a variation in paint and trim options. The FJ series was progressively replaced by models from the Holden FE series from July 1956 to May 1957 with a total of 169,969 examples produced.
There are nearly 20 specific FX-FJ Holden Car Clubs of Australia with members committed to preserving these iconic Holdens. These clubs organise a national gathering for FX-FJ Holden enthusiasts every second year.
The plate measures 12 x 6in (30 x 15cm) and is a lightly embossed product. We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang.
All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today!
For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements.
For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition
If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do
ANY GRAPHIC! ANY DESIGN! ANY COLOUR!
Only logged in customers who have purchased this product may leave a review.
You may also like…
HOLDEN FX SEDAN
0 No Rating Yet$23.50 – $25.10Our HOLDEN FX SEDAN is of course the iconic Holden. The HOLDEN FX was an automobile produced by General Motors-Holden's in Australia as the Holden 48-215 between November 1948 and October 1953. The 48-215 was the first model from General Motors in Australia to bear the Holden name. In mainstream parlance, the official name of "Holden 48-215" was eschewed in favour of the shortened "Holden" designation. Following the replacement of the first Holden, the 48-215 gained the unofficial nickname of Holden FX. This designation was first used in the Drawing Office at GM-H in 1952 as an unofficial means of distinguishing between early 48-215 vehicles with front suspension using lever-action shock absorbers, and those with the new telescopic shock absorber front suspension introduced in 1953 - the term "FX" was pencilled onto a parts list for the new suspension components. The title "FX" later came into use in used car advertisements to describe models with the later suspension, first being used by Melbourne dealer Reg Smith Motors in two advertisements in the 10 February 1960 issue of The Age. Use of the term "FX" gradually spread to cover all 48-215 and 50-2016 vehicles, although the term has never been used by Holden in any official manner. The design was originally penned in the United States by Chevrolet, but was not used because it was deemed too small for the U.S. market as it developed after the war. Instead the design became the basis of only the 48-215 model. Its American origins are quite apparent, as it closely resembles Chevrolets of the period that did make it to production, particularly the Fleetline Aerosedan and the second generation Deluxe. Development of the 48-215 began in 1944. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do ANY GRAPHIC! ANY DESIGN! ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
- REDUCED BY 82%QUICK VIEW
HOLDEN FJ SEDAN
0 No Rating Yet$21.95$4.00
You Save $17.95 off RRPThe HOLDEN FJ SEDAN. The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 to 1957. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX". The sedan, in Standard, Business and Special trim levels, and a coupe utility were announced in October 1953 and were followed by a Panel van derivative in December of that year. A wagon prototype was built but the bodystyle was not put into production. In 1954, Holden's first exports began with sales of the FJ in New Zealand. The FJ, of monocoque construction, broadly followed the silhouette of its predecessor, but featured a bolder horizontal styled front grille, along with comfort and decoration upgrades in a new sedan model named the 'Holden Special'. Originally specified as 60 bhp (45 kW) achieved at 3,800 rpm, the claimed maximum power output from the six-cylinder engine was increased to 65 bhp (48 kW) achieved at 4,000 rpm. In 1955 the car underwent a mild interior facelift for the Holden Special sedan, along with a variation in paint and trim options. The FJ series was progressively replaced by models from the Holden FE series from July 1956 to May 1957 with a total of 169,969 examples produced. There are nearly 20 specific FX-FJ Holden Car Clubs of Australia with members committed to preserving these iconic Holdens. These clubs organise a national gathering for FX-FJ Holden enthusiasts every second year. The plate measures 12 x 6in (30 x 15cm) and is a lightly embossed product. We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do ANY GRAPHIC! ANY DESIGN! ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
- REDUCED BY 9%QUICK VIEW
NUMBER PLATE PROTECTOR COVERS
0 No Rating Yet$20.00 – $29.50
You Save upto $3.00 off RRPNUMBER PLATE PROTECTOR COVERS are sold with or without customised wording. Our super high quality impact resistant NUMBER PLATE PROTECTOR COVERS are weatherproof and long lasting. Made of injection moulded ABS UV resistant, and have polished beveled black edges and are easy and quick to install. You may purchase with our without PERSONALISATION to your cover. We can apply wording along the top or bottom, which is applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. Please Note these covers are sold as singles, not as pairs, so if you require a pair please select 2 in the order basket. There are four sizes: 1) To fit over Standard (37.2 x 13.4cm) number plates, with the covers outer dimensions 38.1 x 13.8cm, and the clear window measures 35.3 x 11cm. The black gloss border is 14mm wide all around the cover. 2) To fit over Slimline (37.2 x 10cm) number plates, with the covers outer dimensions 38.1 x 10.5cm, and the clear window measures 35.3 x 6.5cm. The black gloss border is 17mm wide at top and 20mm wide at bottom. 3) To fit over NSW Premium front slim number plates (37.2cm x 8.4cm) and SA Premium front slim plates (37.1cm x 8.3cm), with the covers outer dimensions 38.1 x 8.9cm, and the clear window measures 35.5 x 5.5cm. The black gloss border is 11mm wide at top and 19mm wide at bottom. 4) To fit over NSW Premium rear plates (37.2cm x 10.7cm) and SA Premium rear plates (37.1cm x 10.6cm), with the covers outer dimensions 38.1 x 11.5cm, and the clear window measures 35.5 x 7.9cm. The black gloss border is 11mm wide at top and 19mm wide at bottom. These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our plate cover will fit over your plate. HOW TO ORDER: First please read the descriptions below, then using the drop down menus select the cover type, and number of covers you want to buy and click the 'Add to Cart' button. Now please click the 'View Cart' button, and in this screen check the details and choose standard or Express delivery, before you click 'Proceed to Checkout'. In the 'Checkout' screen there is an 'Order Notes' box where you must type in details of any vinyl wording that you want on your cover(s). Finally complete your personal details in the required fields and continue down to the payment options. PERSONALISATION: The vinyl sticker colour choices (shown below) are: White; Red; Cyclamen; Pink; Purple; Maroon; Sky Blue; Royal Blue; Grey; Green; Lime; Silver and Yellow We can apply lettering to the top of the cover, the bottom of the cover or both top and bottom. Standard Cover: the wording for top or bottom of cover can be a maximum of 25cm long x 9mm tall. (the border is 14 mm deep). Slimline Cover: the wording for bottom of cover can be a maximum of 25cm long x 15mm tall. (the border is 20 mm deep), and the wording for top of cover can be a maximum of 25cm long x 9mm tall. (the border is 17 mm deep). NSW/SA Premium covers: the wording for bottom of cover can be a maximum of 25cm long x 15mm tall. (the border is 19 mm deep), and the wording for top of cover can be a maximum of 25cm long x 8mm tall. (the border is 11 mm deep). IMPORTANT: When ordering please write what font type and text that you require in the comments section of the shopping cart before finally placing the order. Production takes 2-3 days Installation: Simply expose the sticky surface of the tape on the back of the cover by peeling off the white tape, then position on the number plate and clip in place with the four clips provided. Attention Business Owners – do you want a mobile billboard to help promote your business? Then here’s a cost effective way to get the name and contact details in front of the public as much as possible. Dixie’s Number Plate Frames fit around all standard size Aussie Plates (37cm x 13cm) and are so easy to use - all you do is clip the frame to the number plate and your ready to go, so don’t delay get your own personalised number plate frames today. PERSONALISED CUSTOM FRAMES are priced individually with a minimum order of one, so it's a pretty cost effective advertising medium. Below are the fonts and colours that we most frequently use. Others are available upon request. Please note that fonts may vary slightly from batch to batch, due to character spacing, boldness, and height Interested in personalised novelty number plates or signs as well? If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do ANY GRAPHIC! ANY DESIGN! ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
Related products
- REDUCED BY 71%QUICK VIEW
MERRY CHRISTMAS
0 No Rating Yet$21.00$6.00
You Save $15.00 off RRPWell of course we wish all a VERY MERRY CHRISTMAS. This novelty number plate is the pressed embossed standard Aussie size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do ANY GRAPHIC! ANY DESIGN! ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
- REDUCED BY 53%QUICK VIEW
SMALL KIDS MINI PLATES
0 No Rating Yet$15.00$7.00
You Save upto $8.00 off RRPSMALL KIDS MINI PLATES are a range ideal for Kids - put them on Bikes, Trikes, Trucks, Playrooms, Prams and Strollers. They are are flat non embossed standard USA bike size 15 x 7.5 cms (6 x 3 inches) aluminium plates and extremely high quality, durable and long lasting. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design of these plates is the property of Dixie Souvenirs and Smartblonde Inc from the USA Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
- REDUCED BY 38%QUICK VIEW
CRAFT BEER
0 No Rating Yet$28.45$17.75
You Save $10.70 off RRPThe CRAFT BEER Tin sign is one of many we have in our BAR AND ALCOHOL range. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is Copyright 2018 RetroRocket Studio License courtesy b Creative.com - Desperate Enterprises UPC605279122585 ICCD 12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment. The key is good art, and we can do ANY GRAPHIC! ANY DESIGN! ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
- REDUCED BY 52%QUICK VIEW
DOG LOVERS SIGNS – I LOVE MY SERIES
0 No Rating Yet$21.95$10.50
You Save upto $11.45 off RRPWe carry many different novelty number plate designs for DOG LOVERS, and these 47+ plates are themed " I LOVE MY ............". The DOG LOVERS SIGNS - I LOVE MY SERIES all are flat non-embossed standard USA size 12 x 6 inches (30 x 15cm) aluminium plates made to a high quality, and are durable and long lasting. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. The design of this plate is the property of Dixie Souvenirs and Smartblonde Inc. Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.
Cart
Product Categories
- AUSSIE NOVELTY NUMBER PLATES
- AUTO THEMED
- BAR AND ALCOHOL
- BARGAIN BIN
- BETTY BOOP
- BIRTHDAYS
- CANCER SUPPORT
- COFFEE THEMED
- COUNTRY RODEO
- CUSTOM PLATE FRAME OR SIGN
- EPHEMERA
- FATHERS DAY IDEAS
- FLAG SPECIALS
- FLAGS
- FORD THEMES
- GREY NOMADS
- HERS AND MUM CAVE
- HIP FLASKS
- HIS AND MAN CAVE
- HOLDEN THEMES
- HOT RODS
- KEEP CALM
- KEY RINGS AND CHAINS
- KIDS THINGS
- MOTOR OILS
- MOTORBIKE SIZE PLATES
- MOTORBIKES
- MUSIC
- NED KELLY
- NEW PRODUCTS
- NEW ZEALANDERS
- NOVELTY SIGNS
- NUMBER PLATE FRAMES
- NUMBER PLATE PROTECTOR COVERS
- OTHER PRODUCTS
- OUTBACK TRACKS
- PATRIOTIC
- PETS AND ANIMALS
- RELIGION
- RETIRED OR SENIORS
- ROUTE 66
- SAUCY, RISQUE, CURSE OR SWEAR
- SHED SIGNS
- SPORTS THEMES
- STARS AND IDOLS
- TOURIST SIGNS
- TRACTORS
- TRUCKIN'
- USA NOVELTY NUMBER PLATES
- UTES
- WARNING AND CAUTION SIGNS
- WORKPLACE
Reviews
There are no reviews yet.