FORD THEMES

Times have changed, but for some hardcore fans there will only ever be Holden v Ford and this category is all about the FORDS. They are divided into 2 categories – (1) with images and (2) without images

  • REDUCED BY 28%
    QUICK VIEW

    FORD LOU BANDT UTE

    0 No Rating Yet
    $25.00 $18.00
    You Save $7.00 off RRP

    The FORD Lou Bandt Ute novelty plate shows one of Australia's first ever Utes. Lewis (Lou) Thornet Bandt ( 26 February 1910 – 1987) was an Australian car designer, most famous for designing and building the first ute (coupé utility) cars in the 1930s. Bandt was born the eldest of five children in the South Australian town of Moonta. The family moved to Adelaide after World War I, and in 1924 he began a fitting and turning apprenticeship with Duncan & Fraser Ltd who specialised in modifying Model T Fords. He moved to Victoria in 1927 and Melbourne Motor Body & Assembling Company, and in 1929 he moved to the Ford factory as the subsidiary's first designer. The design of the ute was a result of a 1932 letter from an unnamed Victorian farmer's wife asking for “a vehicle to go to church in on a Sunday and which can carry our pigs to market on Mondays”. In response, Bandt developed the ute and the model called a "coupe utility" at the time was released in 1934. When the Australian version was displayed in the US, Henry Ford nicknamed it the "Kangaroo Chaser". A convertible version, known as the roadster utility was produced in limited numbers by Ford in the 1930s. During World War II, Bandt helped to design long-range fuel tanks for Spitfire and Thunderbolt fighter planes. He also worked on design innovations for the UK-sourced Ford Zephyr, the 1967 Australian Ford Fairlane, and the never-approved Falcon convertible, of which six were built outside Ford in 1962. This is a fully pressed embossed Aussie standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 28%
    QUICK VIEW

    FORD XK FALCON SEDAN

    0 No Rating Yet
    $25.00 $18.00
    You Save $7.00 off RRP

    The FORD XK FALCON SEDAN novelty plate is a mid-sized car that was produced by Ford Australia between 1960 and 1962. It was the first of seven generations of this Australian-made model, produced until 2016. The first Falcon sold in Australia was the XK series, which was introduced in September 1960. It was initially offered only as a four-door sedan, in both Falcon and Falcon Deluxe trim levels. The XK was essentially a right-hand drive version of the North American model, although local country dealers often included modifications such as heavy-duty rear suspension (five leaves) and larger 6.50 x 13 tyres. Front seat belts were optional. The wagon, added to the range in November 1960, was shortened at the rear due to concern that the back of the car might scrape on rough roads and spoon drains.  Billed as being "Australian-with a world of difference", Falcon offered the first serious alternative to Holden, and became an instant success. This is a pressed embossed Aussie standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Ford Mustang II Mach 1

    0 No Rating Yet
    $25.00

    Our FORD Mustang II Mach 1 is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. The new style plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 40%
    QUICK VIEW

    Ford Mustang 1966 Coupe

    0 No Rating Yet
    $21.00 $12.60
    You Save $8.40 off RRP

    Our FORD Mustang 1966 COUPE is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. The new style plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD Mustang 81 Cobra Fox

    0 No Rating Yet
    $25.00

    Our FORD Mustang 81 Cobra Fox is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. The new style plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • THREE FORD F100 TRUCKS

    0 No Rating Yet
    $25.10

    THREE FORD F100 TRUCKS - The second generation of the Ford F-Series is a series of trucks that was produced by Ford from the 1953 to 1956 model years. In line with the previous generation, the F-Series encompassed a wide range of vehicles, ranging from light-duty pickup trucks to heavy-duty commercial vehicles. In place of the previous "Bonus-Built" series, Ford now marketed its truck range as the "Triple Economy" series. To further emphasize the model update, Ford changed the F-Series model nomenclature from a single number to three numbers; subsequently, this system has remained in use on all Ford F-Series trucks to the present day. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FALCON XW PANEL VAN & SEDAN

    0 No Rating Yet
    $25.10

    Our FORD FALCON XW PANEL VAN & SEDAN is of course showing two models of the Ford Falcon (XW) - a full-size car that was produced by Ford Australia from 1969 to 1970. It was the third iteration of the second generation of this Australian-made model and also included the Ford Futura (XW) and the Ford Fairmont (XW)—the luxury-oriented version of the Falcon. The XW was released in June 1969 replacing the XT Falcon. The XW was an extensive facelift of the XT, featuring a new grille and tail lights. Almost all exterior panels were new and the interior was extensively redesigned. The XW Falcon range featured eight passenger vehicles and three commercial models. Ford Falcon Sedan Ford Falcon Wagon Ford Falcon 500 Sedan Ford Falcon 500 Wagon Ford Futura Sedan Ford Fairmont Sedan Ford Fairmont Wagon Ford Falcon GT Ford Falcon Utility Ford Falcon Van Ford Falcon 500 Utility This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FALCON XM COUPE AND SEDAN

    0 No Rating Yet
    $25.10

    FORD FALCON XM COUPE AND SEDAN is a mid-size car that was produced by Ford Australia between February 1964 and February 1965. It was the third iteration of the first generation of the Australian-made Ford Falcon. The XM series Falcon range was introduced in February 1964, as a replacement for the XL series Falcon. The XM featured around 1,500 modifications from the XL, including numerous changes to the suspension which now featured stronger ball joints, new front upper wishbones, coil-over shock units and relocated rear spring-hangers. Also new were bigger axle shafts and tougher engine mounts. The vacuum operated windscreen wipers of the XL series were replaced by a two-speed electric motor unit and the seats were stronger with better quality upholstery. Unlike previous Australian Falcons, the XM represented a significant departure from the contemporary US Ford Falcon models in terms of exterior styling. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XR FALCON GT

    0 No Rating Yet
    $25.10

    Our FORD XR FALCON GT novelty number plate features the Ford Falcon full-sized car produced by Ford Australia from 1966 to 1968. It was the first of the second generation of this Australian-made model and also included the Ford Fairmont (XR), the luxury-oriented version of the Falcon. The XR series was introduced in September 1966. Styling was based on the third-generation 1966 US Ford Falcon, and it was promoted as the "Mustang-bred Falcon". It was the first Australian Falcon to be offered with a V8 engine, the 200 bhp (150 kW), 289 cubic inch (4.7 l) Windsor unit. The XR marked the first time a V8 engine could be optioned in all trim levels of an Australian car, V8s having previously been reserved for the more upmarket variants. The 144 cubic inch (2.4 l) six-cylinder engine was deleted for the XR series, leaving the 170 cubic inch (2.8 l) six as the base Falcon engine. A 200 cubic inch (3.3 l) six was also available and a 200ci super pursuit motor. The XR series was initially offered in 9 different models: Falcon, Falcon 500, and Fairmont sedans, Falcon, Falcon 500, and Fairmont wagons, Falcon and Falcon 500 utilities, and the Falcon Van. The new wagons shared the 111-inch (2,800 mm) wheelbase with the XR sedans, unlike the 1966 US Falcon wagons which featured a 115-inch (2,900 mm) wheelbase. The Falcon 500 replaced the Falcon Deluxe of the XP series and the two-door hardtop body style available in the XP series was not offered in the XR range. The Falcon XR won the Wheels Car of the Year award in 1966, giving Ford Falcon two straight wins. The non-gold GTs, while having the same specifications, are the rarest of the early Australian muscle cars. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XC FALCON COBRA

    0 No Rating Yet
    $25.10

    The FORD XC FALCON COBRA is part of the the Ford Falcon range that was produced by Ford in Australia from 1970 to 1972. In August 1978 Ford introduced the limited production Falcon Cobra, a high-performance version of the XC Falcon Hardtop. Only 400 were built, including 4.9-litre and 5.8-litre street versions and 30 "Bathurst Specials" When production of the XC Hardtop at the Broadmeadows Assembly plant was ending in March 1978, more than 400 body shells were left unsold and Ford Australia faced a dilemma of how to shift them, rather than scrap them. When an original proposal to turn these cars into black and gold Playboy-themed cars (complete with "bunny" decals) was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was also M.D. of Ford Australia at that time (from 1978 to 1980). He and a local design team elected to capitalise on Allan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "Shelby Mustang" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype Falcon Cobra was built in late April 1978 and production began that same July. The cars were painted Bold Blue with an overlay of Sno White, with Olympic Blue accent stripes separating the two colours ... "Cobra" emblem decals, a throwback to Carroll Shelby's Mustangs of the 1960s, were affixed to the front fenders, along with a name decal at the rear. Unusually, the bodyshells were painted blue first, the intended area of blue stripes and sills then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially-numbered plaque (from 001 to 400) on the dash. The first 200 Cobras produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland ... the only exceptions to this being build number 001 is a 302ci (4.9 litre) V8 and build number 351 is a 351ci (5.8 litre) V8. Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes, limited slip differential, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were uniformly black, with Cobra specific cloth seat inserts in black with blue stripes that match those on the outside body. Cars numbered from 002 to 0031 were known as Option 97 specification, the so-called "Bathurst Cobras", fitted with parts to allow homologation for racing, including twin radiator fans switchable from the dash, a gearbox oil cooler, suspension bracing and reworked rear wheel body housings. They were most easily identified from the other 370 Option 96 Cobras via their large (and functional) rear-opening bonnet bulge. Allan Moffat's "Moffat Ford Dealers" race cars of late 1978 shared the same body paint decoration as the road cars. Falcon Cobras have become increasingly revered by collectors across Australia and a mint example might be worth upwards of $100,000 ... with Option 97 cars (rarely offered up for sale) likely to fetch a further premium. This popular plate comes standard as  flat non-embossed with a pressed out embossed border. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MY <---> FORD

    0 No Rating Yet
    $25.00

    Our MY <---> FORD series of plates is very comprehensive featuring several generations of Fords as shown in the drop down menu. We have MY AU and so on through the range of models  AU, BA BF, EA, EB, ED, EF, EL, FG,FG, XA, XB, XC, XD, XE, XF, XG, XH, XK, XL, XM, XP, XR, XT, XW, XY, ZA, ZB, ZC, ZD These MY <---> FORD novelty plates are all the two colour pressed embossed standard Aussie size 37cm x 13cm aluminium plate. Our plates are extremely high quality, durable and long lasting and we are proud to say this MY <---> FORD range is manufactured in Queensland, Australia. We also have a comprehensive range of pictorial Ford model plates as well as black and white Ford model plates For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition, and tese novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XE FAIRMONT GHIA

    0 No Rating Yet
    $23.50$25.10

    The FORD XE FAIRMONT GHIA  novelty plate shows the car that was produced by Ford Australia from 1982 to 1984. It was the second iteration of the fourth generation of this Australian-made model and also included the Ford Fairmont (XE)—the luxury-oriented version of the Falcon. The XE range consisted of nine models marketed as follows: Falcon utility / Falcon van / Falcon GL ute / Falcon GL van / Falcon GL sedan / Falcon GL wagon / Fairmont sedan / Fairmont wagon & Fairmont Ghia sedan This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Showing 1 - 12 of 43 products in this Category

FORD THEMES / Ford with images

Showing 1 - 20 of 57 products in this Category View All Products in this category ...

For many hardcore fans there will only ever be Holden v Ford and this category is all about the FORDS. This category focusing on FORD with images

  • REDUCED BY 28%
    QUICK VIEW

    FORD LOU BANDT UTE

    0 No Rating Yet
    $25.00 $18.00
    You Save $7.00 off RRP

    The FORD Lou Bandt Ute novelty plate shows one of Australia's first ever Utes. Lewis (Lou) Thornet Bandt ( 26 February 1910 – 1987) was an Australian car designer, most famous for designing and building the first ute (coupé utility) cars in the 1930s. Bandt was born the eldest of five children in the South Australian town of Moonta. The family moved to Adelaide after World War I, and in 1924 he began a fitting and turning apprenticeship with Duncan & Fraser Ltd who specialised in modifying Model T Fords. He moved to Victoria in 1927 and Melbourne Motor Body & Assembling Company, and in 1929 he moved to the Ford factory as the subsidiary's first designer. The design of the ute was a result of a 1932 letter from an unnamed Victorian farmer's wife asking for “a vehicle to go to church in on a Sunday and which can carry our pigs to market on Mondays”. In response, Bandt developed the ute and the model called a "coupe utility" at the time was released in 1934. When the Australian version was displayed in the US, Henry Ford nicknamed it the "Kangaroo Chaser". A convertible version, known as the roadster utility was produced in limited numbers by Ford in the 1930s. During World War II, Bandt helped to design long-range fuel tanks for Spitfire and Thunderbolt fighter planes. He also worked on design innovations for the UK-sourced Ford Zephyr, the 1967 Australian Ford Fairlane, and the never-approved Falcon convertible, of which six were built outside Ford in 1962. This is a fully pressed embossed Aussie standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 28%
    QUICK VIEW

    FORD XK FALCON SEDAN

    0 No Rating Yet
    $25.00 $18.00
    You Save $7.00 off RRP

    The FORD XK FALCON SEDAN novelty plate is a mid-sized car that was produced by Ford Australia between 1960 and 1962. It was the first of seven generations of this Australian-made model, produced until 2016. The first Falcon sold in Australia was the XK series, which was introduced in September 1960. It was initially offered only as a four-door sedan, in both Falcon and Falcon Deluxe trim levels. The XK was essentially a right-hand drive version of the North American model, although local country dealers often included modifications such as heavy-duty rear suspension (five leaves) and larger 6.50 x 13 tyres. Front seat belts were optional. The wagon, added to the range in November 1960, was shortened at the rear due to concern that the back of the car might scrape on rough roads and spoon drains.  Billed as being "Australian-with a world of difference", Falcon offered the first serious alternative to Holden, and became an instant success. This is a pressed embossed Aussie standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 12%
    QUICK VIEW

    FORD ZEPHYR X 2

    0 No Rating Yet
    $25.10 $22.00
    You Save $3.10 off RRP

    The FORD ZEPHYR X 2. The Zephyr was manufactured by Ford of Britain. Between 1951 and 1962 it was sold as a more powerful six-cylinder model to complement the four-cylinder Ford Consul. From 1962 to 1972 the Zephyr itself was offered in both four- and six-cylinder versions, the Consul having been dropped. The Zephyr, and its luxury variants, the Ford Zodiac and Ford Executive, were the largest passenger cars in the British Ford range from 1951 until their replacement by the Consul and Granada models in 1972. In Australia, the Mark II Consul, Zephyr and Zodiac were built at Ford Australia's factory in Geelong. Sedan, coupe utility, and station wagon versions were produced. The Australian-developed Mark II Station Wagon differed from its English Estate Car counterpart in having a wind-up rear window, and a straight C pillar, rather than a curved one. A handful of Station Wagons were registered in 1958, but sales did not really commence until about halfway through 1959. Mark II manufacture continued until 1962, in which year production switched to the assembly of Mark IIIs from imported completely knocked-down (CKD) kits. This plate is a flat non-embossed with a pressed out embossed border. The  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, with mounting holes so they can easily be hung on display indoors or outdoors.  For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 9%
    QUICK VIEW

    FORD LOGO BLACK TREAD

    0 No Rating Yet
    $21.95 $19.99
    You Save $1.96 off RRP

    The FORD LOGO BLACK TREAD plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 012368969FD 0754E For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 27%
    QUICK VIEW

    FORD F150 AMERICAN UTE

    0 No Rating Yet
    $21.95 $15.99
    You Save $5.96 off RRP

    The FORD F150 AMERICAN UTE plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 9681 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 3%
    QUICK VIEW

    Ford Truck Parking Only

    0 No Rating Yet
    $28.18 $27.27
    You Save $0.91 off RRP

    This great looking sign Ford Truck Parking Only sign features Ford Motor Company – the American multinational automaker headquartered in Dearborn, Michigan, a suburb of Detroit. It was founded by Henry Ford and incorporated on June 16, 1903. The company sells automobiles and commercial vehicles under the Ford brand and most luxury cars under the Lincoln brand. Ford also owns Brazilian SUV manufacturer, Troller, and Australian performance car manufacturer FPV. In the past, it has also produced tractors and automotive components. Ford owns an 8% stake in Aston Martin of the United Kingdom, and a 49% stake in Jiangling of China. It also has a number of joint-ventures, one in China (Changan Ford), one in Taiwan (Ford Lio Ho), one in Thailand (AutoAlliance Thailand), one in Turkey (Ford Otosan), and one in Russia (Ford Sollers). It is listed on the New York Stock Exchange and is controlled by the Ford family, although they have minority ownership (but majority of the voting power). Ford introduced methods for large-scale manufacturing of cars and large-scale management of an industrial workforce using elaborately engineered manufacturing sequences typified by moving assembly lines; by 1914, these methods were known around the world as Fordism. Ford’s former UK subsidiaries Jaguar and Land Rover, acquired in 1989 and 2000 respectively, were sold to Tata Motors in March 2008. Ford owned the Swedish automaker Volvo from 1999 to 2010. In 2011, Ford discontinued the Mercury brand, under which it had marketed entry-level luxury cars in the United States, Canada, Mexico, and the Middle East since 1938. During the financial crisis at the beginning of the 21st century, it was close to bankruptcy, but it has since returned to profitability. Ford is the second-largest U.S.-based automaker (preceded by General Motors) and the fifth-largest in the world (behind Toyota, VW, Hyundai-Kia and General Motors) based on 2015 vehicle production. At the end of 2010, Ford was the fifth largest automaker in Europe. Ford is the eighth-ranked overall American-based company in the 2010 Fortune 500 list, based on global revenues in 2009 of $118.3 billion. In 2008, Ford produced 5.532 million automobiles and employed about 213,000 employees at around 90 plants and facilities worldwide. The company went public in 1956 but the Ford family, through special Class B shares, still retain 40 percent voting rights Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. This is a 'large parking sign' measuring 45 x 30cm (18 x 12ins)  and is made in the USA from high quality aluminium they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! This is a licensed product Has a sticker with FORD logo - then wording Official Licenced Product. Licence no: 9681 If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can doBONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 82%
    QUICK VIEW

    FORD THUNDERBIRD

    0 No Rating Yet
    $21.95 $4.00
    You Save $17.95 off RRP

    The Ford Thunderbird is a rear wheel drive automobile which was manufactured by Ford in the United States over eleven model generations from 1955 through 2005. The Thunderbird created a market niche that eventually became known as the personal luxury car. The Thunderbird entered production for the 1955 model year as a sporty two-seat convertible. Unlike the Chevrolet Corvette, it was not marketed as a sports car. Ford positioned the Thunderbird as an upscale model and is credited in developing a new market segment, the personal luxury car. In 1958, the Thunderbird gained a second row of seats. Succeeding generations became larger until the line was downsized in 1977, again in 1980, and once again in 1983. Sales were good until the 1990s, when large 2-door coupes became unpopular; production ceased at the end of 1997. In 2002 production of the Thunderbird started again, a revived 2-seat model was launched, which was available through the end of the 2005 model year. From its introduction in 1955 to its phaseout in 2005, Ford produced over 4.4 million Thunderbirds. The FORD THUNDERBIRD plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Product Code 90G-2034 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 82%
    QUICK VIEW

    FORD THUNDERBIRD LOGO BLACK

    0 No Rating Yet
    $21.95 $4.00
    You Save $17.95 off RRP

    The FORD THUNDERBIRD LOGO BLACK plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 92g-2348 4020 7N9S9UR3 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 9%
    QUICK VIEW

    FORD RACING

    0 No Rating Yet
    $21.95 $19.99
    You Save $1.96 off RRP

    The FORD RACING plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 043956734FD 3F6F6 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 9%
    QUICK VIEW

    Ford Logo Camouflage

    0 No Rating Yet
    $21.95 $19.99
    You Save $1.96 off RRP

    The Ford Logo Camouflage plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 9681 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 38%
    QUICK VIEW

    FORD GT 2007 WHITE AND BLUE

    0 No Rating Yet
    $28.45 $17.75
    You Save $10.70 off RRP

    FORD GT 2007 WHITE AND BLUE The Ford GT is an American mid-engine two-seater sports car manufactured and marketed by Ford for model year 2005 in conjunction with the company's 2003 centenary — and again in redesigned form for model year 2017. The GT recalls Ford's historically significant GT40, consecutive four-time winner of the 24 Hours of LeMans (1966-1969), including a 1-2-3 finish in 1966. The GT is similar in outward appearance to the original Ford GT40 cars, but bigger, wider, and most importantly 3 in (76 mm) taller than the original 40 in (100 cm); as a result, a potential name for the car was the GT43. Although the cars are visually related, structurally, there is no similarity between the modern GT and the 1960s GT40 that inspired it. Three production prototype cars were shown in 2003 as part of Ford's centenary, and delivery of the production Ford GT began in the autumn of 2004. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright Carries this wording - Ford Oval and namplates are registered trademarks owned and licenced by Ford Motor Company. Manufactured by Sign Of The Times, Vernon, CA 90058. Made in China Images by davidgphotography.com. Item #98319 Each sign is in a clear plastic pocket and for protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 82%
    QUICK VIEW

    FORD GRUNT

    0 No Rating Yet
    $21.95 $4.00
    You Save $17.95 off RRP

    The FORD GRUNT  comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Product plate code: 97B-0268 If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 9%
    QUICK VIEW

    FORD MODEL B CALIFORNIA CLASSIC

    0 No Rating Yet
    $21.95 $19.99
    You Save $1.96 off RRP

    The FORD MODEL B CALIFORNIA CLASSIC plate is of course about the 1932 Ford. Between 1932 and 1934 Ford produced the Model B, Model 18 & Model 40. These succeeded the Model A. The Model B continued to offer Ford's proven four cylinder and was available from 1932 to 1934. The V8 (Model 18 in 1932, Model 40 in 1933 & 1934) was succeeded by the Model 48. It was the first Ford fitted with the flathead V‑8. In Europe, it was built slightly longer. The same bodies were available on both 4 cylinder Model Bs and V8 Model 18/40s. The company also replaced the Model AA truck with the Model BB, available with either the four- or eight-cylinder engine. This very collectable older plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Very old licenced  product ref no 94J-3170 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates, frames or signs made to your own design, we can quickly do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • THREE FORD F100 TRUCKS

    0 No Rating Yet
    $25.10

    THREE FORD F100 TRUCKS - The second generation of the Ford F-Series is a series of trucks that was produced by Ford from the 1953 to 1956 model years. In line with the previous generation, the F-Series encompassed a wide range of vehicles, ranging from light-duty pickup trucks to heavy-duty commercial vehicles. In place of the previous "Bonus-Built" series, Ford now marketed its truck range as the "Triple Economy" series. To further emphasize the model update, Ford changed the F-Series model nomenclature from a single number to three numbers; subsequently, this system has remained in use on all Ford F-Series trucks to the present day. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FALCON XW PANEL VAN & SEDAN

    0 No Rating Yet
    $25.10

    Our FORD FALCON XW PANEL VAN & SEDAN is of course showing two models of the Ford Falcon (XW) - a full-size car that was produced by Ford Australia from 1969 to 1970. It was the third iteration of the second generation of this Australian-made model and also included the Ford Futura (XW) and the Ford Fairmont (XW)—the luxury-oriented version of the Falcon. The XW was released in June 1969 replacing the XT Falcon. The XW was an extensive facelift of the XT, featuring a new grille and tail lights. Almost all exterior panels were new and the interior was extensively redesigned. The XW Falcon range featured eight passenger vehicles and three commercial models. Ford Falcon Sedan Ford Falcon Wagon Ford Falcon 500 Sedan Ford Falcon 500 Wagon Ford Futura Sedan Ford Fairmont Sedan Ford Fairmont Wagon Ford Falcon GT Ford Falcon Utility Ford Falcon Van Ford Falcon 500 Utility This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FALCON XM COUPE AND SEDAN

    0 No Rating Yet
    $25.10

    FORD FALCON XM COUPE AND SEDAN is a mid-size car that was produced by Ford Australia between February 1964 and February 1965. It was the third iteration of the first generation of the Australian-made Ford Falcon. The XM series Falcon range was introduced in February 1964, as a replacement for the XL series Falcon. The XM featured around 1,500 modifications from the XL, including numerous changes to the suspension which now featured stronger ball joints, new front upper wishbones, coil-over shock units and relocated rear spring-hangers. Also new were bigger axle shafts and tougher engine mounts. The vacuum operated windscreen wipers of the XL series were replaced by a two-speed electric motor unit and the seats were stronger with better quality upholstery. Unlike previous Australian Falcons, the XM represented a significant departure from the contemporary US Ford Falcon models in terms of exterior styling. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XR FALCON GT

    0 No Rating Yet
    $25.10

    Our FORD XR FALCON GT novelty number plate features the Ford Falcon full-sized car produced by Ford Australia from 1966 to 1968. It was the first of the second generation of this Australian-made model and also included the Ford Fairmont (XR), the luxury-oriented version of the Falcon. The XR series was introduced in September 1966. Styling was based on the third-generation 1966 US Ford Falcon, and it was promoted as the "Mustang-bred Falcon". It was the first Australian Falcon to be offered with a V8 engine, the 200 bhp (150 kW), 289 cubic inch (4.7 l) Windsor unit. The XR marked the first time a V8 engine could be optioned in all trim levels of an Australian car, V8s having previously been reserved for the more upmarket variants. The 144 cubic inch (2.4 l) six-cylinder engine was deleted for the XR series, leaving the 170 cubic inch (2.8 l) six as the base Falcon engine. A 200 cubic inch (3.3 l) six was also available and a 200ci super pursuit motor. The XR series was initially offered in 9 different models: Falcon, Falcon 500, and Fairmont sedans, Falcon, Falcon 500, and Fairmont wagons, Falcon and Falcon 500 utilities, and the Falcon Van. The new wagons shared the 111-inch (2,800 mm) wheelbase with the XR sedans, unlike the 1966 US Falcon wagons which featured a 115-inch (2,900 mm) wheelbase. The Falcon 500 replaced the Falcon Deluxe of the XP series and the two-door hardtop body style available in the XP series was not offered in the XR range. The Falcon XR won the Wheels Car of the Year award in 1966, giving Ford Falcon two straight wins. The non-gold GTs, while having the same specifications, are the rarest of the early Australian muscle cars. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • PEE ON FORD OR PEE ON HOLDEN

    0 No Rating Yet
    $25.10

    These two popular plates PEE ON FORD and PEE ON HOLDEN are flat non-embossed  with a pressed out embossed border.  They're made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm and have mounting holes so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 20%
    QUICK VIEW

    FORD CUSSY

    0 No Rating Yet
    $25.00 $20.00
    You Save upto $5.00 off RRP

    We have two choices of FORD CUSSY - the Customline Twin Spinner and the Triple Spinner. This automobile was produced by Ford in the United States for model years 1949 to 1959. The Ford Customline was introduced in 1952 as the mid-range model in that year’s US Ford range, positioned below the Ford Crestline and above the Ford Mainline. It was offered in 2-door sedan, 4-door sedan, 2-door coupé & 4-door station wagon body styles. The coupe was marketed as the Club Coupe and the station wagon as the Customline Country Sedan. 1952 Customlines were available with 215 cid inline six-cylinder or 239 cid V8 engines. Production totaled 402,542 units. These are the fully pressed embossed Aussie size novelty number plate style in a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XC FALCON COBRA

    0 No Rating Yet
    $25.10

    The FORD XC FALCON COBRA is part of the the Ford Falcon range that was produced by Ford in Australia from 1970 to 1972. In August 1978 Ford introduced the limited production Falcon Cobra, a high-performance version of the XC Falcon Hardtop. Only 400 were built, including 4.9-litre and 5.8-litre street versions and 30 "Bathurst Specials" When production of the XC Hardtop at the Broadmeadows Assembly plant was ending in March 1978, more than 400 body shells were left unsold and Ford Australia faced a dilemma of how to shift them, rather than scrap them. When an original proposal to turn these cars into black and gold Playboy-themed cars (complete with "bunny" decals) was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was also M.D. of Ford Australia at that time (from 1978 to 1980). He and a local design team elected to capitalise on Allan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "Shelby Mustang" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype Falcon Cobra was built in late April 1978 and production began that same July. The cars were painted Bold Blue with an overlay of Sno White, with Olympic Blue accent stripes separating the two colours ... "Cobra" emblem decals, a throwback to Carroll Shelby's Mustangs of the 1960s, were affixed to the front fenders, along with a name decal at the rear. Unusually, the bodyshells were painted blue first, the intended area of blue stripes and sills then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially-numbered plaque (from 001 to 400) on the dash. The first 200 Cobras produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland ... the only exceptions to this being build number 001 is a 302ci (4.9 litre) V8 and build number 351 is a 351ci (5.8 litre) V8. Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes, limited slip differential, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were uniformly black, with Cobra specific cloth seat inserts in black with blue stripes that match those on the outside body. Cars numbered from 002 to 0031 were known as Option 97 specification, the so-called "Bathurst Cobras", fitted with parts to allow homologation for racing, including twin radiator fans switchable from the dash, a gearbox oil cooler, suspension bracing and reworked rear wheel body housings. They were most easily identified from the other 370 Option 96 Cobras via their large (and functional) rear-opening bonnet bulge. Allan Moffat's "Moffat Ford Dealers" race cars of late 1978 shared the same body paint decoration as the road cars. Falcon Cobras have become increasingly revered by collectors across Australia and a mint example might be worth upwards of $100,000 ... with Option 97 cars (rarely offered up for sale) likely to fetch a further premium. This popular plate comes standard as  flat non-embossed with a pressed out embossed border. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

FORD THEMES / Ford without images

Showing 1 - 20 of 31 products in this Category View All Products in this category ...
  • REDUCED BY 25%
    QUICK VIEW

    ADDICTED TO FORDS

    0 No Rating Yet
    $15.99 $11.99
    You Save upto $4.00 off RRP

    This ADDICTED TO FORDS frame is the ideal gift for auto enthusiasts adding something different to the family car. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is white on all frames, but if ordering a white frame the print colour will be black. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames or protector covers made with your own choice of wording and colours we can do this for you very quickly. Similarly we specialize in custom made novelty signs and number plates with your own choice of characters, or even your own design with a picture background. Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 25%
    QUICK VIEW

    REAL MEN DRIVE FORDS

    0 No Rating Yet
    $15.99 $11.99
    You Save upto $4.00 off RRP

    This REAL MEN DRIVE FORDS frame is the ideal gift for Ford enthusiasts adding something different to the family car. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is white on all frames, but other colours can be done on request. On a white frame we would use black text HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable

  • GTHO

    0 No Rating Yet
    $25.00

    The GTHO novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car. Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 seconds The Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra. A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000 This novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 25%
    QUICK VIEW

    64 THUNDERBIRD

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    The 64 THUNDERBIRD frame is the ideal gift for auto enthusiasts adding something different to the family car. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is usually white on all frames, but other colours can be done on request. On a white frame we would use black text. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames or protector covers made with your own choice of wording and colours we can do this for you very quickly. Similarly we specialize in custom made novelty signs and number plates with your own choice of characters, or even your own design with a picture background. Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MY <---> FORD

    0 No Rating Yet
    $25.00

    Our MY <---> FORD series of plates is very comprehensive featuring several generations of Fords as shown in the drop down menu. We have MY AU and so on through the range of models  AU, BA BF, EA, EB, ED, EF, EL, FG,FG, XA, XB, XC, XD, XE, XF, XG, XH, XK, XL, XM, XP, XR, XT, XW, XY, ZA, ZB, ZC, ZD These MY <---> FORD novelty plates are all the two colour pressed embossed standard Aussie size 37cm x 13cm aluminium plate. Our plates are extremely high quality, durable and long lasting and we are proud to say this MY <---> FORD range is manufactured in Queensland, Australia. We also have a comprehensive range of pictorial Ford model plates as well as black and white Ford model plates For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition, and tese novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • ZEPHYR

    0 No Rating Yet
    $25.00

    ZEPHYR refers to The Ford Zephyr car that was manufactured by Ford of Britain. Between 1951-1962 it was sold as a more powerful six-cylinder model to complement the four-cylinder Ford Consul. From 1962 to 1972 the Zephyr itself was offered in both 4 and 6 cylinder versions. The Zephyr, and its luxury variants, the Ford Zodiac and Ford Executive, were the largest passenger cars in the British Ford range from 1951 until their replacement by the Consul and Granada models in 1972. This ZEPHYR novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CORTINA

    0 No Rating Yet
    $25.00

    CORTINA refers to the Ford Cortina car that was built by Ford UK in various guises from 1962 - 1982, and was the United Kingdom's best-selling car of the 1970s. The Cortina was produced in five generations Mark I-Mark V, from 1962-1982. From 1970 onward, it was almost identical to the German-market Ford Taunus which was part of a Ford attempt to unify its European operations. By 1976, when the revised Taunus was launched, the Cortina was identical. The new Taunus/Cortina used the doors and some panels from the 1970 Taunus. It was replaced in 1982 by the Ford Sierra. In Asia and Australasia, it was replaced by the Mazda 626-based Ford Telstar. The name was inspired by the name of the Italian ski resort Cortina d'Ampezzo, site of the 1956 Winter Olympics. As a publicity stunt, several Cortinas were driven down the bobsled run at the resort which was called Cortina Auto-Bobbing. This CORTINA novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • ANGLIA

    0 No Rating Yet
    $25.00

    ANGLIA refers to the Ford Anglia car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. A total of 1,594,486 Anglias were produced. It was replaced by the Ford Escort. Australian factories built Anglias 1949-1953 sharing the frontal styling and 90 inch wheelbase chassis of their English E494A counterparts but differed in many other ways, notably in the range of body styles offered - 4-door saloon, 2-door tourer, 2-door coupe utility and 2-door roadster utility model. At the time of its introduction, the A494A Tourer was the cheapest new car on the Australian market. This ANGLIA novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FALCON

    0 No Rating Yet
    $25.00

    The FALCON is a full-sized car which has been manufactured by the Ford Motor Company of Australia since 1960. From the XA series of 1972 onward, each Falcon and range of derivates have been designed, developed, and built in Australia, following the phasing out of the American-influenced Falcon of 1960 to 1971, which had been re-engineered locally as the XK to XY series for the harsher Australian conditions. The luxury-oriented Ford Fairmont model joined the range from 1965. Luxury long-wheelbase derivative versions called the Ford Fairlane and LTD arrived in 1967 and 1973, respectively. The Ford Falcon and its derivates have been Australian-made best-sellers, with over 3,000,000 sales in seven generations In May 2013, Ford Australia announced the end of local production, which comprises Falcon and its closely related Territory crossover SUV, by October 2016. This decision is attributable to Ford Motor Company's "One Ford" product development plan introduced in 2008 to rationalise its global range. Under this plan, Falcon's indirect replacements are the fourth-generation Mondeo from Europe and the sixth-generation Mustang from North America – the latter to retain Ford's Australian V8 heritage. This FALCON novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GT40

    0 No Rating Yet
    $25.00

    The GT40 novelty number plate is for the auto enthusiast. The Ford GT40 is a high performance American-British endurance racing car, built and designed in England (Mk I, Mk II, and Mk III) and in the United States (Mk IV), and powered by a series of American-built engines, which won the 24 Hours of Le Mans 1966 to 1969 The GT40 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate with a picture background then we can do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CAPRI

    0 No Rating Yet
    $25.00

    The CAPRI novelty plate relates to a wonderful car; the Ford Capri. There were a few models - Ford Consul Capri coupé was produced by Ford of Britain between 1961 and 1964. The Ford Capri coupé was produced by Ford of Europe from 1969 to 1986. The Ford/Mercury Capri convertible was produced by the Ford Motor Company of Australia from 1989 to 1994. The Capri name was also used by Ford's Lincoln-Mercury Division on six different models which did not bear the Ford name. The Lincoln Cosmopolitan Capri from 1950 to 1951; the Lincoln Capri from 1952 to 1959; the Mercury Comet Capri in 1966–1967; and three different generations of Mercury Capris from 1970 to 1994. The CAPRI novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate with a picture background then we can do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GTHO 351

    0 No Rating Yet
    $25.00

    The GTHO 351 novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car. Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 seconds The Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra. A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000 It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that's been producing and selling quality number plates for years.  The GTHO 351 sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

  • FORD GT 351

    0 No Rating Yet
    $25.00

    The FORD GT 351 novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO's 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car. Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 seconds The Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra. A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000 This FORD GT 351 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate with a picture background then we can do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GT 350

    0 No Rating Yet
    $25.00

    The GT 350 novelty plate relates to the legendary Aussie muscle car . Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as “…simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms…” The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia’s fastest four-door production car. Some interesting bits and pieces from Wikipedia – Top Speed: 227 km/h (141 mph) @ 6150rpm 0 – 60 mph – 6.5 seconds 0 – 100 km – 6.8 seconds Standing 1/4 mile (400m) – 14.4 seconds This GT 350 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • XT GT

    0 No Rating Yet
    $25.00

    The XT GT is a The Ford Falcon (XT) is a full-size car that was produced by Ford Australia from 1968 to 1969. It was the second iteration of the second generation of this Australian-made model and also included the Ford Fairmont (XT)—the luxury-oriented version of the Falcon. The XT GT novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD TRUCKS

    0 No Rating Yet
    $25.00

    The FORD TRUCKS novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • XR8

    0 No Rating Yet
    $25.00

    The XR8 novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • XB COUPE

    0 No Rating Yet
    $25.00

    The XB COUPE novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • XA COUPE

    0 No Rating Yet
    $25.00

    The XA COUPE novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • ONE TONNER

    0 No Rating Yet
    $25.00

    The ONE TONNER novelty number plate refers to a cab chassis ute. The most famous was produced by Holden, the Australian subsidiary of General Motors (GM) between 1971 and 1984, and again between 2003 and 2005.   This plate is available as ONE TONNER or just TONNER This ONE TONNER novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of embossed characters, or even a plate or sign made to your own design with a picture background then we can do these for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

{"cart_token":"","hash":"","cart_data":""}