HOLDEN HT PREMIER UTE

HOLDEN HT PREMIER UTE
Clear

The HOLDEN HT PREMIER UTE novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models.

The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon.

The Brougham, which used a body with an extended boot, was available in one model only – the Brougham sedan

The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe

Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility

This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a plate to your design please click here

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Additional Information

Product Type

Aussie Flat non-embossed, Aussie Flat with embossed edges

Reviews

There are no reviews yet.

Be the first to review “HOLDEN HT PREMIER UTE”

You may also like…

  • DESIGN YOUR OWN AUSSIE SIZE PLATE

    DESIGN YOUR OWN AUSSIE SIZE PLATE and have a unique product in store that none of your competitors has, as our plates lend themselves very well to the ‘custom’ side of things. You could promote your region/town to tourists; provide a souvenir of a tourist attraction; promote your business; or promote your car club or rally with our customised items. Each sign is top quality aluminium a little under 1 mm thick, with a lovely gloss finish, that only our high quality dye sublimation process and photo quality digital printing methods will give, so if you would like plates made to your design, we can easily do this for you. Virtually anything you want can be created with our digital equipment.  The Key is Good Art! ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! This type of plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, or a pressed out embossed border and characters, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Send us your own artwork, logo or design – first our US based supplier creates the artwork for you, then once you have signed off that it is correct, production time for most orders can be completed and the items ready to ship within a few days. • The minimum production run is 1 plate, but for orders less than 12 items, a $5 per item surcharge applies PLUS art set up fees as below will apply • For production runs of 24 or more signs/plates, the cost per sign/plate is the same as our wholesale price on stocked plates • 50% deposit upfront, with balance on or before day of shipping • There is a manufacturing set up fee of just $20 if you supply us with everything ‘artwork ready’ to go straight to print on the plate. • If we need to create the artwork for you (and we will of course show you a proof) there is an artwork fee of $55 which includes the set up fee. • Art ready means at least 250 dpi and the correct proportions for the sign you require - eg, for an Aussie size plate the art needs to be approx. 10cm wide x 4 cm high • First our US based manufacturer creates the artwork, then once you have signed off that it is correct, production commences • For most orders production is completed and the items ready to ship within a few days. • If required we can number or letter a set of plates with sequential letters and numbering – there is a surcharge of $1.80 per plate for this. SHIPPING: If you want your items shipped from the USA immediately we will charge you the full shipping costs (approx $90 per 9kg carton), BUT if you can wait until we have our regular monthly shipment coming in, then we will charge you 50% of that from USA to Australia, plus the usual courier charges from Dixie HQ to your store (approx $25 per 5kg satchel). For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We look forward to assisting you DESIGN YOUR OWN AUSSIE SIZE PLATE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT MONARO GTS 350

    HOLDEN HT MONARO GTS 350 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT WAGON AND PANEL VAN

    HOLDEN HT WAGON AND PANEL VAN This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.