HOLDEN HJ MONARO GTS SEDAN

HOLDEN HJ MONARO GTS SEDAN

Seriously tough wheels

Clear

The HOLDEN HJ MONARO GTS SEDAN novelty plate shows the car that was produced by Holden in Australia 1968 and 1977 and between 2001 and 2006. Three generations of the Monaro have been produced, with the last spawning an all wheel-drive variant, export models and various concept cars.
The HJ followed the HQ, and a heavy facelift and some model rationalisation was applied to the HJ Monaro, which was released in October 1974. Its front end bears a resemblance to the 1970–1972 American Chevrolet Monte Carlo. The 350 V8 engine option and the base Monaro coupé were both discontinued. The Monaro GTS continued to be available as a coupé or sedan with 253 in3 (4,150 cc) V8 power, or the optional 308 in3 (5,050 cc) V8 engine. The GTS sedan was now a model of its own—in HQ the GTS sedan was an optioned Kingswood. The Monaro LS coupé also continued within the range, but still with the 3.3-litre six-cylinder engine as its base power unit. The body paint-outs were discontinued in the HJ Monaro GTS range, but for the first time, the Monaro could be dressed up with optional front and rear spoilers. It seemed that Holden were no longer interested in promoting the Monaro GTS coupé as a performance machine and this became all the more obvious with the HJ series coupé having retained the HQ model’s rear body styling. The HJ Monaro LS coupé is close to being the rarest regular production car ever made in Australia with only 337 units produced. The HJ Monaro GTS coupé was discontinued during 1975 due to falling demand,606 examples having been produced

This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a plate to your design please click here

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Additional information

Product Type

,

Reviews

There are no reviews yet.

Be the first to review “HOLDEN HJ MONARO GTS SEDAN”

You may also like…

  • DESIGN YOUR OWN AUSSIE SIZE PLATE

    DESIGN YOUR OWN AUSSIE SIZE PLATE and have a unique product in store that none of your competitors has, as our plates lend themselves very well to the ‘custom’ side of things. You could promote your region/town to tourists; provide a souvenir of a tourist attraction; promote your business; or promote your car club or rally with our customised items. Each sign is top quality aluminium a little under 1 mm thick, with a lovely gloss finish, that only our high quality dye sublimation process and photo quality digital printing methods will give, so if you would like plates made to your design, we can easily do this for you. Virtually anything you want can be created with our digital equipment.  The Key is Good Art! ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! This type of plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, or a pressed out embossed border and characters, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Send us your own artwork, logo or design – first our US based supplier creates the artwork for you, then once you have signed off that it is correct, production time for most orders can be completed and the items ready to ship within a few days. • The minimum production run is 1 plate, but for orders less than 12 items, a $5 per item surcharge applies PLUS art set up fees as below will apply • For production runs of 24 or more signs/plates, the cost per sign/plate is the same as our wholesale price on stocked plates • 50% deposit upfront, with balance on or before day of shipping • There is a manufacturing set up fee of just $20 if you supply us with everything ‘artwork ready’ to go straight to print on the plate. • If we need to create the artwork for you (and we will of course show you a proof) there is an artwork fee of $55 which includes the set up fee. • Art ready means at least 250 dpi and the correct proportions for the sign you require - eg, for an Aussie size plate the art needs to be approx. 10cm wide x 4 cm high • First our US based manufacturer creates the artwork, then once you have signed off that it is correct, production commences • For most orders production is completed and the items ready to ship within a few days. • If required we can number or letter a set of plates with sequential letters and numbering – there is a surcharge of $1.80 per plate for this. SHIPPING: If you want your items shipped from the USA immediately we will charge you the full shipping costs (approx $90 per 9kg carton), BUT if you can wait until we have our regular monthly shipment coming in, then we will charge you 50% of that from USA to Australia, plus the usual courier charges from Dixie HQ to your store (approx $25 per 5kg satchel). For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We look forward to assisting you DESIGN YOUR OWN AUSSIE SIZE PLATE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden HJ Kingswood

    The Holden HJ Kingswood novelty plate is all about the The Holden HJ series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971. All HJ models, aside from the One Tonner, were easily identified from the HQ by having a squared-off frontal treatment with wrap-around indicator lights. The rear of the sedan models featured a new bumper and wraparound triangular taillights, while all other body styles kept the previous HQ's rear styling. Sedan and wagon also had revised rear quarter panels. The mainstream passenger car range consisted of 4-door sedan and 5-door wagon models in three trim levels. Belmont sedan Belmont wagon Kingswood sedan Kingswood wagon Premier sedan Premier wagon This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HJ WAGON AND SEDAN

    HOLDEN HJ WAGON AND SEDAN This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.