HOLDEN HR PREMIER SEDAN

HOLDEN HR PREMIER SEDAN

$25.10

Our HOLDEN HR PREMIER SEDAN is of course the iconic Holden.  The Holden HR range was released in April 1966, replacing the Holden HD series which had been in production since 1965. In addition to a revised grille, the HR featured a reworked roofline and larger rear window (on the sedans), revised rear lights (on sedans and wagons) and changes to almost all exterior body panels. Other changes included revised ball joint front suspension, widened track, improved interior trim and woodgrain interior finish for the Premier models. Six months after the launch of the HR, all models were given a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sunvisors and a shatterproof interior rearview mirror

This popular plate is flat and has no embossed characters but has a pressed out embossed border, made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors.

Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • HOLDEN HD SEDAN

    0 No Rating Yet
    $25.10

    Our HOLDEN HD SEDAN is of course the iconic Holden. The Holden HD was an automobile produced by General Motors-Holden's in Australia from 1965 to 1966. The Holden HD sedans and station wagons were released in February 1965 with coupe utility and panel van body styles following in July of that year. The HD range replaced the Holden EH series which had been in production since 1963. The HD had a completely new body, which was wider and longer than that of the EH and offered significant increases in passenger space, load space and equipment levels. Body styling exhibited strong similarities to Vauxhall's FC Victor of the previous year, including that car's unusual concave rear window. Disc brakes were offered for the first time on a Holden model and the optional Hydramatic three–speed automatic transmission as used in the EH was replaced by a Powerglide two– speed unit.The HD was also the first Holden to be offered with a factory performance engine option, the "X2". The HD is often confused with the later HR but can be recognised by the front indicators being mounted under the bumper (the HR had round indicators mounted in the grill) and the wrap around tail lights at the back (the HR had narrow lights that extended up the end of the rear fins but not around the edge) This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN EK SEDAN

    0 No Rating Yet
    $25.10

    Our HOLDEN EK SEDAN is of course the iconic Holden. The Holden EK was an automobile produced by General Motors-Holden's in Australia from 1961 to 1962. Introduced on 2 May 1961, the EK series was a facelifted version of the Holden FB, which it replaced. The EK, the first new Holden released in the 1960s, was a minor face-lift of the superseded FB series, with obvious changes limited to a new grille of eight vertical bars (instead of six), and body side mouldings. In terms of finish, "Standard" vehicles were painted in a single colour with no additional trimming or fittings, while "Special", the most popular model, came with stainless steel trims along the side and a white roof, as well as chrome Special badges, and two-tone vinyl interiors. Parking lights were incorporated into the top grille bar, and other changes included new exterior badges, a revised interior trim, electric wipers (replacing the old vacuum type ones), and a new fresh-air unit with a new ventilation air intake located forward of the windscreen. The only significant mechanical change from the FB was the introduction of the first automatic transmission to be offered on a Holden. Marketed as the Hydra-Matic, it was a well-regarded three-speed unit which was fully imported from the United States. It was only offered as an option on the Holden Special models. Other options included more than 30 approved NASCO Accessories, such as a bonnet lock, a locking tank cap, a car heater, external rear-view mirrors, or a sunshade. Visually, the two commercial vehicles, the Utility and Panel Van, remained almost identical to the previous model, the FB. In fact, the FB rear quarter panels and tail lights were carried over to the EK commercials. The carrying capacity was however increased from 8 cwt to 10 cwt by fitting upgraded springs. This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HR WAGON

    0 No Rating Yet
    $25.10

    HOLDEN HR WAGON This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HR UTE

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HR UTE novelty number plate refers to the Holden HR range released in April 1966, replacing the Holden HD series which had been in production since 1965. In addition to a revised grille, the HR featured a reworked roofline and larger rear window (on the sedans), revised rear lights (on sedans and wagons) and changes to almost all exterior body panels. Other changes included revised ball joint front suspension, widened track, improved interior trim and woodgrain interior finish for the Premier models. Six months after the launch of the HR, all models were given a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sun visors and a shatterproof interior rearview mirror. Holden HR range offered four-door sedan and five-door station wagon body styles in three trim levels with the six models marketed as follows. Holden Standard sedan (HR 215) ; Holden Standard station sedan (HR 219); Holden Special sedan (HR 225); Holden Special station sedan (HR 229); Holden Premier sedan (HR 235); Holden Premier station sedan (HR 239). Notes courtesy Wikipedia This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HR SEDAN

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HR SEDAN novelty number plate refers to the Holden HR range released in April 1966, replacing the Holden HD series which had been in production since 1965. In addition to a revised grille, the HR featured a reworked roofline and larger rear window (on the sedans), revised rear lights (on sedans and wagons) and changes to almost all exterior body panels. Other changes included revised ball joint front suspension, widened track, improved interior trim and woodgrain interior finish for the Premier models. Six months after the launch of the HR, all models were given a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sun visors and a shatterproof interior rearview mirror. Holden HR range offered four-door sedan and five-door station wagon body styles in three trim levels with the six models marketed as follows. Holden Standard sedan (HR 215) ; Holden Standard station sedan (HR 219); Holden Special sedan (HR 225); Holden Special station sedan (HR 229); Holden Premier sedan (HR 235); Holden Premier station sedan (HR 239). Notes courtesy Wikipedia This plate has no embossed characters but has a pressed out embossed border and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.