AUSSIE NOVELTY NUMBER PLATES

  • HOLDEN VK COMMODORES X 2

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN VK COMMODORES X 2 is of course the car manufactured by Holden in Australia. The Holden Commodore is a car manufactured since 1978 by Holden in Australia and formerly in New Zealand. Production in Australia ceased on 20 October 2017. For the original model, Holden replaced the long-serving Kingswood and Premier large executive cars developed in Australia, with another rear wheel drive platform that was, however, based on a smaller European design by Opel, re-engineered for Australian conditions. Subsequent series became larger, culminating with the fourth generation Commodore, fully developed in Australia and based on the GM Zeta platform. Initially introduced as a single sedan body style, the range expanded in 1979 to include a station wagon. From 1984, Holden began branding the flagship Commodore model as Holden Calais, with the Commodore Berlina introduced in 1984 gaining independent Holden Berlina nomenclature in 1988. Long-wheelbase Statesman/Caprice derivatives and Commodore utility body variants followed in 1990. The third generation architecture spawned the most body styles, with a new Holden utility launched in 2000, reborn Monaro coupé in 2001, four-door Holden Crewman utility and all-wheel drive Holden Adventra crossover in 2003. Holden Special Vehicles (HSV) in 1987 began official modification of high performance variants of the Commodore and its derivatives, under its own nameplate. First generation VB (1978–1980) VC (1980–1981) VH (1981–1984) VK (1984–1986) VL (1986–1988) Second generation VN (1988–1991) VP (1991–1993) VR (1993–1995) VS (1995–1997) Third generation VT (1997–2000) The highest selling Commodore was the VT model series with more than 303,000 built. VX (2000–2002) VY (2002–2004) VZ (2004–2006) Fourth generation VE (2006–2013) VF (2013–present) This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN VK COMMODORE SL

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN VK COMMODORE SL is of course the car manufactured by Holden in Australia. The Holden Commodore is a car manufactured since 1978 by Holden in Australia and formerly in New Zealand. Production in Australia ceased on 20 October 2017. For the original model, Holden replaced the long-serving Kingswood and Premier large executive cars developed in Australia, with another rear wheel drive platform that was, however, based on a smaller European design by Opel, re-engineered for Australian conditions. Subsequent series became larger, culminating with the fourth generation Commodore, fully developed in Australia and based on the GM Zeta platform. Initially introduced as a single sedan body style, the range expanded in 1979 to include a station wagon. From 1984, Holden began branding the flagship Commodore model as Holden Calais, with the Commodore Berlina introduced in 1984 gaining independent Holden Berlina nomenclature in 1988. Long-wheelbase Statesman/Caprice derivatives and Commodore utility body variants followed in 1990. The third generation architecture spawned the most body styles, with a new Holden utility launched in 2000, reborn Monaro coupé in 2001, four-door Holden Crewman utility and all-wheel drive Holden Adventra crossover in 2003. Holden Special Vehicles (HSV) in 1987 began official modification of high performance variants of the Commodore and its derivatives, under its own nameplate. First generation VB (1978–1980) VC (1980–1981) VH (1981–1984) VK (1984–1986) VL (1986–1988) Second generation VN (1988–1991) VP (1991–1993) VR (1993–1995) VS (1995–1997) Third generation VT (1997–2000) The highest selling Commodore was the VT model series with more than 303,000 built. VX (2000–2002) VY (2002–2004) VZ (2004–2006) Fourth generation VE (2006–2013) VF (2013–present) This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN FIRST AND LAST

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN FIRST AND LAST is of course a commemorative plate in recognition of Holden car manufacturing in Australia. Sadly, the iconic Australian car manufacturer HOLDEN ceased vehicle and engine production in Australia on 20 October 2017. Holden began manufacturing cars in Port Melbourne in 1948 but the Elizabeth facility didn’t open until 1958, initially building car bodies before becoming a vehicle assembly line in 1965. Holden factories at other sites in NSW, Queensland and Victoria followed before they too were shut. In the end, Holden will have built a total of 7.6 million cars — including more than 2.3 million Commodores, not including exports — versus Ford Australia’s tally of 5.9 million vehicles and Toyota Australia’s total of 3.4 million. The 48-215 was the first model from General Motors in Australia to bear the Holden name. In mainstream parlance, the official name of "Holden 48-215" was eschewed in favour of the shortened "Holden" designation. Following the replacement of the first Holden, the 48-215 gained the unofficial nickname of Holden FX The 7,687,675th vehicle to be produced by the company and the last car that rolled off the production line in Holden’s Elizabeth factory in Adelaide’s northern suburbs was a Redline Holden Commodore SS-V, which is expected to be a collector’s item. That historic occasion marked the end of almost a century of automotive manufacturing for Australia, and 69 years for Holden. It was the end of the era for the Australian car manufacturing industry There are two versions of this plate as shown in the gallery and drop down menu. One with a plain background and the other with the Aussie flag background This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN VH COMMODORE SLE

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN VH COMMODORE SLE is of course the car manufactured by Holden in Australia. The Holden Commodore is a car manufactured since 1978 by Holden in Australia and formerly in New Zealand. Production in Australia ceased on 20 October 2017. For the original model, Holden replaced the long-serving Kingswood and Premier large executive cars developed in Australia, with another rear wheel drive platform that was, however, based on a smaller European design by Opel, re-engineered for Australian conditions. Subsequent series became larger, culminating with the fourth generation Commodore, fully developed in Australia and based on the GM Zeta platform. Initially introduced as a single sedan body style, the range expanded in 1979 to include a station wagon. From 1984, Holden began branding the flagship Commodore model as Holden Calais, with the Commodore Berlina introduced in 1984 gaining independent Holden Berlina nomenclature in 1988. Long-wheelbase Statesman/Caprice derivatives and Commodore utility body variants followed in 1990. The third generation architecture spawned the most body styles, with a new Holden utility launched in 2000, reborn Monaro coupé in 2001, four-door Holden Crewman utility and all-wheel drive Holden Adventra crossover in 2003. Holden Special Vehicles (HSV) in 1987 began official modification of high performance variants of the Commodore and its derivatives, under its own nameplate. First generation VB (1978–1980) VC (1980–1981) VH (1981–1984) VK (1984–1986) VL (1986–1988) Second generation VN (1988–1991) VP (1991–1993) VR (1993–1995) VS (1995–1997) Third generation VT (1997–2000) VX (2000–2002) VY (2002–2004) VZ (2004–2006) Fourth generation VE (2006–2013) VF (2013–present) This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MY <---> FORD

    0 No Rating Yet
    $25.00

    Our MY <---> FORD series of plates is very comprehensive featuring several generations of Fords as shown in the drop down menu. We have MY AU and so on through the range of models  AU, BA BF, EA, EB, ED, EF, EL, FG,FG, XA, XB, XC, XD, XE, XF, XG, XH, XK, XL, XM, XP, XR, XT, XW, XY, ZA, ZB, ZC, ZD These MY <---> FORD novelty plates are all the two colour pressed embossed standard Aussie size 37cm x 13cm aluminium plate. Our plates are extremely high quality, durable and long lasting and we are proud to say this MY <---> FORD range is manufactured in Queensland, Australia. We also have a comprehensive range of pictorial Ford model novelty number plates which can be seen by clicking HERE and we have a comprehensive range of black and white Ford model plates which can be seen by clicking HERE For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition, and tese novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • IF THE CARAVANS ROCKIN

    0 No Rating Yet
    $23.50$25.10

    IF THE CARAVANS ROCKIN is one of several plates we have for the Grey Nomad market. There are two similar designs in the US size as shown below in the linked products but they are more American market plates whereas this one will have more appeal to Aussies. The IF THE CARAVANS ROCKIN is supplied standard as a  flat and non-embossed plate, and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • TASMANIA CRADLE MOUNTAIN

    0 No Rating Yet
    $23.50$25.10

    TASMANIA CRADLE MOUNTAINis of course featuring Australia's southernmost state.Abbreviated as TAS and known colloquially as "Tassie" it's located 240 km to the south of the Australian mainland, separated by the Bass Strait. The 26th-largest island in the world with a population of around 519,100 This is our new style  flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • PALM COVE

    0 No Rating Yet
    $23.50$25.10

    PALM COVE is of course the popular tourist centre just north of Cairns in far North Queensland and gateway to Cape York and the Great Barrier Reef. This is our new style  flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BLANK PLATES

    0 No Rating Yet
    $25.00

    Our BLANK PLATES  are made from high quality Aluminium and available in many sizes as listed and can be made for you as "One Offs". Production turnaround is VERY quick (between 1-3 days) as these embossed custom novelty number plates are made right here in Australia - and best of all they are just like real ones on your car or truck. If you need one in a real hurry, ask us about express delivery service. The BLANK PLATES novelty number plate is handy for people wanting to put their own stickers on a plate. We can supply them in any of the standard size and colour combinations, so blank plates are just like a normal embossed character plates but they don't have any characters but retain the embossed 'pressed out' plate border, either with a contrast border colour or not You can choose the size and type of plate and the colours you require from the drop down menu, but at the current time we can't show you the actual colours for each product The border colour choices are: White; Black; Blue; Yellow; Gold; Silver; Chrome, Green; Red; Maroon Plate background colours vary and the choices are shown below and in the drop down menu Please read the following details about plates made to your own personal requirements: (1) Aussie Standard Size plate (13.4cm x 37.2cm) is available in the following 13 background colours: White; Black; Yellow; Orange; Red; Pink; Maroon; Light Blue; Dark Blue; Green; Purple; Silver and Gold. (2) Aussie Slim Size plate (10cm x 30cm) is available in the following 12 background colours: White; Black; Yellow; Red; Pink; Maroon; Light Blue; Dark Blue; Green; Purple, Silver, Orange and Gold. (3) Euro Size plate (52cm x 11cm) is available in the following 7 background colours: White; Black; Yellow; Red; Purple; Green, Dark Blue and Pink coming soon. (4) Trailer Size plate (25.3cm x 10cm) are available in the following 4 background colours: White; Black; Red; Dark Blue. (5) Motorbike Size plate (18.5cm x 10cm) are available in the following 5 background colours: White; Black; Yellow; Red; Dark Blue. (6) USA Size plate (30cm x 15cm) are available in the following 2 background colours: White; Black, Yellow. (7) Japanese Size plate (33cm x 16.5cm) are available in the following 2 background colours: White; Black. HOW TO ORDER: First select the plate type, colours and number of plates you want to buy, then click the 'Add to Order' button. Then click 'View Order'.  In this screen there is an "Order Notes" box where you can type in any details you want to tell us, then simply complete your details in the required fields and then hit 'SEND MY ORDER NOW'. You will not be asked for payment until we have contacted you to ensure we have correctly understood what you want There is a Colour chart posted on this website HERE  or there is an icon to click on in the linked products below Please be aware these are intended as novelty plates for decoration only. The authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.  

  • MONTVILLE

    0 No Rating Yet
    $25.00

    MONTVILLE is a small town in the Sunshine Coast hinterland, on the Blackall Range in Queensland, Australia, around 400 metres above sea level. At the 2011 census, Montville and the surrounding area had a population of 886. The first white settlers arrived in the area in 1887 and the town was later named by Henry Smith (who bought a selection of land there in 1893) after a suggestion by his mother, as it reminded her of their early years in Montville, USA. From about 1900 the town became a popular mountain resort. Montville was the setting for Eleanor Dark's 1959 novel Lantana Lane. Montville Post Office opened by February 1910 (a receiving office had been open from 1897) Montville was predominantly a logging then farming community (dairy, citrus, avocados, pineapples and macadamia nuts) until a tourism boom which commenced during the 1970s, taking advantage of the scenic views of the Sunshine Coast and the nearby rainforest walks. The MONTVILLE novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHAMBERLAIN CHAMPION 9G

    0 No Rating Yet
    $23.50$25.10

    Our CHAMBERLAIN CHAMPION 9G plate features Australia's 9G Chamberlain tractor which was the famous workhorse of the late 50’s and 60’s, and was designed and built in Western Australia. These machines, which are capable of a relatively high speed, can be made comfortable to drive, and of course have a proven reliability over a long period of time. They can traverse rock, mud, sand and relatively deep water, and so they have earned a reputation of being a “go anywhere machine”. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HG PREMIER SEDAN

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN HG PREMIER SEDAN is of course about Australia's iconic Holden. The Holden HG range was introduced on 26 July 1970, replacing the Holden HT series which had been in production since May 1969. Changes from the previous model included new grilles and body decorations as well as new safety features, colours and trim designs. All V8-engined models were now fitted with improved disc brakes and the suspension system of the Monaro GTS was modified for greater comfort. The mainstream HG series was offered in four-door sedan and five-door station wagon body styles in three trim levels. Belmont sedan / Belmont station wagon / Kingswood sedan / Kingswood station wagon / Premier sedan / Premier station wagon This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN FJ SPECIAL SEDAN

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN FJ SPECIAL SEDAN is of course about Australia's iconic Holden. The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 to 1957. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX". The sedan, in Standard, Business and Special trim levels, and a coupe utility were announced in October 1953 and were followed by a Panel van derivative in December of that year. A wagon prototype was built but the bodystyle was not put into production. In 1954, Holden's first exports began with sales of the FJ in New Zealand The FJ, of monocoque construction, broadly followed the silhouette of its predecessor, but featured a bolder horizontal styled front grille, along with comfort and decoration upgrades in a new sedan model named the 'Holden Special'. Originally specified as 60 bhp (45 kW) achieved at 3,800 rpm, the claimed maximum power output from the six-cylinder engine was increased to 65 bhp (48 kW) achieved at 4,000 rpm. In 1955 the car underwent a mild interior facelift for the Holden Special sedan, along with a variation in paint and trim options. The FJ series was progressively replaced by models from the Holden FE series from July 1956 to May 1957 with a total of 169,969 examples produced. In the 1950s almost half the cars on Australian roads were FJs, which gives you an idea of how popular it was. Smart styling and healthy demand for a locally-produced family car made a sales winner.  Today there are nearly 20 specific FX-FJ Holden Car Clubs of Australia with members committed to preserving these iconic Holdens. These clubs organise a national gathering for FX-FJ Holden enthusiasts every second year. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • TWO HOLDEN HQ KINGSWOOD SEDANS

    0 No Rating Yet
    $23.50$25.10

    Our TWO HOLDEN HQ KINGSWOOD SEDANS is of course about Australia's iconic Holden. The Holden HQ was an automobile produced by General Motors-Holden's in Australia from 1971 to 1974. The HQ series of 1971 was a completely new design, introducing larger capacity 173-cubic-inch (2.84 L) and 202-cubic-inch (3.3 L) six-cylinder engines, with the continued availability of 253-cubic-inch (4.1 L), 308-cubic-inch (5.0 L) Holden and 350-cubic-inch (5.7 L) Chev V8 engines. HQ was the most radically engineered Holden since the introduction of the original 48-215 model of 23 years prior. It featured a perimeter frame and semi-monocoque (unibody) construction, and was the first full-size Holden to have coil spring rear suspension. As a cost-saving measure, the HQ was only engineered for right-hand drive, hence it was not feasible to sell the car in left-hand drive markets. Thus Holden exports declined from 41,181 in 1973 to just 7,440 in 1975. Despite this, the HQ became Holden's most popular car, selling 485,650 units. With almost half a million sold the HQ is still the most popular Holden ever produced and along the way spawned such classics as the Sandman panel van. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • ITS OUR

    0 No Rating Yet
    $26.00

    State Of Origin kicks off in May/June so get ready with the ITS OUR Dixie supporters novelty number plates. The ITS OUR (STATE OF ORIGIN) novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • TRIUMPH THUNDER

    0 No Rating Yet
    $25.00

    The TRIUMPH THUNDER novelty plate is part of our motorbike range includes plate options such as DOOHAN, BONNEVILLE, THUNDER, Z900, Z1000, HARLEY DAVIDSON, 2WHEELN, HONDA, YAMAHA, V*STAR. It is a regular pressed embossed plate with two lines of embossed characters 5cm high These plates are extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • RESERVED

    0 No Rating Yet
    $25.00

    The RESERVED novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HJ MONARO GTS SEDAN

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HJ MONARO GTS SEDAN novelty plate shows the car that was produced by Holden in Australia 1968 and 1977 and between 2001 and 2006. Three generations of the Monaro have been produced, with the last spawning an all wheel-drive variant, export models and various concept cars. The HJ followed the HQ, and a heavy facelift and some model rationalisation was applied to the HJ Monaro, which was released in October 1974. Its front end bears a resemblance to the 1970–1972 American Chevrolet Monte Carlo. The 350 V8 engine option and the base Monaro coupé were both discontinued. The Monaro GTS continued to be available as a coupé or sedan with 253 in3 (4,150 cc) V8 power, or the optional 308 in3 (5,050 cc) V8 engine. The GTS sedan was now a model of its own—in HQ the GTS sedan was an optioned Kingswood. The Monaro LS coupé also continued within the range, but still with the 3.3-litre six-cylinder engine as its base power unit. The body paint-outs were discontinued in the HJ Monaro GTS range, but for the first time, the Monaro could be dressed up with optional front and rear spoilers. It seemed that Holden were no longer interested in promoting the Monaro GTS coupé as a performance machine and this became all the more obvious with the HJ series coupé having retained the HQ model's rear body styling. The HJ Monaro LS coupé is close to being the rarest regular production car ever made in Australia with only 337 units produced. The HJ Monaro GTS coupé was discontinued during 1975 due to falling demand,606 examples having been produced This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HZ KINGSWOOD PANEL VAN

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HZ KINGSWOOD PANEL VAN novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HZ KINGSWOOD PANEL VAN & UTE

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HZ KINGSWOOD PANEL VAN & UTE novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HZ KINGSWOOD UTE

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HZ KINGSWOOD UTE novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CORVETTE STINGRAY C3

    0 No Rating Yet
    $23.50$25.10

    The CORVETTE STINGRAY C3 novelty plate shows the third generation Chevrolet Corvette C3 Stingray - a sports car that was produced by Chevrolet for the 1968 through 1982 model years. Engines and chassis components were mostly carried over from the previous generation, but the body and interior were new. It set new sales records with 53,807 produced for the 1979 model year. The C3 is the third generation of the Chevrolet Corvette, while the 1969 through 1976 models mark the second generation of the Corvette Stingray. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT PREMIER UTE

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HT PREMIER UTE novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BEER AUSSIE MAN’S DRINK

    0 No Rating Yet
    $23.50$25.10

    The BEER AUSSIE MAN'S DRINK novelty plate. Australian men take their beer seriously and there is certainly a bit of confusion when ordering beers in different Aussie states. The most popular beer sizes in Australia include… A jug, which is 1140ml or 40 fluid ounces and is designed for sharing with your mates A pint is a 570ml (20 oz) glass but in South Australia, it is called an Imperial Pint because they call the 450ml glass a Pint A schooner is a 450ml (15 oz) glass, except in South Australia where it is called a Pint. Schooners are usually served in New South Wales but also exist in Victorian or Western Australian pubs too. A pot is served in a 285ml (10 oz) glass, but it has a variety of other names such as Half Pint, Middy, Handle or Ten. This is a popular option if you are after a quick drink. Here is a quick rundown by state of what beer sizes are called. VICTORIA SOUTH AUSTRALIA WESTERN AUSTRALIA NEW SOUTH WALES / CANBERRA Horse or Pony 140ml Small glass 170ml Glass 200ml Pot 285ml Schooner 425ml Pint 570ml Pony 140ml Butcher 200ml Schooner 285ml Pint  425ml Imperial Pint 570ml Shetland 115ml Pony 140ml Bobbie or Six (fl oz) 170ml Glass 200ml Middy or Half Pint 285ml Schooner 425ml Pint 570ml Pony 140ml Seven (fl oz) 200ml Middy or Half Pint 285ml Schmiddy 350ml Schooner 425ml Pint 570ml QUEENSLAND TASMANIA NORTHERN TERRITORY Pony 140ml Seven (fl oz) 200ml Pot 285ml Schooner 425ml Pint 570ml Small beer 115ml Six (fl oz) 170ml Seven (fl oz) 200ml Seven (fl oz) or a Pot 285ml Fifteen (fl oz) or a schooner 425ml Pint 570ml Seven 200ml Handle 285ml Schooner 425ml Pint 570ml This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CAMARO SS

    0 No Rating Yet
    $23.50$25.10

    The CAMARO SS novelty plate shows the first generation Chevrolet Camaro that appeared in Chevrolet dealerships in September 1966, for the 1967 model year on a brand-new rear-wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible with a choice of six-cylinder and V8 power plants. The first-generation Camaro was built through the 1969 model year. The Camaro's standard drive train was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) or a 327 cu in (5.4 L) (307 cu in (5.0 L) later in 1969) V8 engine, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS396 cars was the Turbo 400 three-speed automatic. There was a plethora of other options available all three years, including three main packages: The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model. The SS performance package consisted of a 350 or 396 cu in V8 engine and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging. The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am series. It included a solid-lifter 302 V8, 4-speed transmission, power disc brakes, and two wide stripes down the hood and trunk lid. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MINI THREE MODELS

    0 No Rating Yet
    $23.50$25.10

    The MINI THREE MODELS novelty plate shows three models of the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. BMW acquired the Rover Group (formerly British Leyland) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using the MINI name This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MINI COOPER S

    0 No Rating Yet
    $23.50$25.10

    The MINI COOPER S novelty plate shows the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT KINGSWOOD SEDAN

    0 No Rating Yet
    $23.50$25.10

    The HOLDEN HT KINGSWOOD SEDAN novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • POP’S GARAGE

    0 No Rating Yet
    $25.00

    Our POP'S GARAGE is available as either a Euro Size plate (52cm x 11cm) or as a Standard Size Aussie plate (13.4cm x 37.2cm).  Stock colours are white on Black background, but it can be done in a variety of other colours. Stock item comes with apostrophe, but it can be made without Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEVY AVENUE

    0 No Rating Yet
    $25.00

    Our CHEVY AVENUE is a Euro Size plate (52cm x 11cm) without mounting holes. Soon to be available with mounting holes. Stock colour is silver on Black background Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.