NSW BLUES

NSW BLUES
REDUCED BY 20%

$25.00 $25.00

Apologies for the poor image colour – its actually White on Light Blue. The NSW BLUES novelty number plate is referring to the New South Wales rugby league team which has represented the Australian state of New South Wales in rugby league football since the sport’s beginnings there in 1907. Also known as the Blues due to their sky blue jerseys, the team competes in the annual State of Origin series against neighbouring team, the Queensland rugby league team. This annual event is a series of three games competing for the State of Origin shield. As of 2019, the team is coached by Brad Fittler and captained by Boyd Cordner. Prior to 1980 when the “state-of-origin” selection criteria were introduced, the New South Wales team, in addition to playing annually against Queensland, played matches against foreign touring sides and occasionally toured overseas themselves. They have played all their home matches at Stadium Australia, New South Wales’ largest stadium, since it was built in 1999.

This is a pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia.

PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.”

These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a ‘non-Graphic’ two colour plate –

CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS

If you want a plate with a picture background then we can also do these types of plates for you – virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a picture background ‘Graphic’ plate (or sign) to your own design please

CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS

Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • AUSTRALIAN CAPITAL TERRITORY

    0 No Rating Yet
    $3.00$78.00

    The AUSTRALIAN CAPITAL TERRITORY FLAG was was officially adopted by the Australian Capital Territory Legislative Assembly in 1993. The flag differs from the Australian state flags as it is not a defaced British Blue Ensign. It is similar in design to the flag of the Northern Territory. The flag uses the Canberra city colours of blue and gold (which also happen to be the heraldic colours of Australia). The Southern Cross appears as five white stars on a blue panel at the hoist, whilst in the centre of the gold field in the fly is the modified arms of the City of Canberra. The flag was designed by Ivo Ostyn. In 1988 and 1992 competitions for a proposed new flag were held, in which artists and residents of the ACT could put forth their designs for the new flag. Subsequently the current flag won the competition. The ACT Legislative Assembly then officially adopted this flag in 1993. Flags come in various types as described below and sizes are commonly referred to in feet rather than metres, so please read about the various types of flag below and then make your selection from the drop down menu Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags which are available HERE Patches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • REDUCED BY 20%
    QUICK VIEW

    BLUES

    0 No Rating Yet
    $25.00 $20.00
    You Save upto $5.00 off RRP

    State Of Origin kicks off in May/June so get ready with the BLUES Dixie supporters novelty number plates. The BLUES novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 25%
    QUICK VIEW

    NSW BLUES FRAMES

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    This collection of NSW BLUES FRAMES frame are the ideal gift for Origin enthusiasts adding something different to the family car. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Some are printed with white as the default print colour and others with blue as the default font, but other colours can be done on request. If you choose a white frame, we would do Blue letters and if you choose a Blue frame we would do White letters HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order – CLICK HERE FOR CUSTOM MADE FRAME DETAILS Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable