HOLDEN VH COMMODORE HDT SS x TWO

HOLDEN VH COMMODORE HDT SS x TWO

$23.50$25.10

Clear
SKU: N/A Categories: ,

Our HOLDEN VH COMMODORE HDT SS x TWO is of course the car manufactured by Holden in Australia. The Holden Commodore is a car manufactured since 1978 by Holden in Australia and formerly in New Zealand. Production in Australia ceased on 20 October 2017. For the original model, Holden replaced the long-serving Kingswood and Premier large executive cars developed in Australia, with another rear wheel drive platform that was, however, based on a smaller European design by Opel, re-engineered for Australian conditions. Subsequent series became larger, culminating with the fourth generation Commodore, fully developed in Australia and based on the GM Zeta platform.

September 1982 saw the release of the Commodore SS, a model that has been a Commodore mainstay ever since. The abbreviation SS stands for “Sports Sedan”. Offered with Holden’s 4.1 L V8 as standard, the factory SS was supplemented by three up-spec versions produced by Peter Brock’s HDT Special Vehicles company. The HDT models were named “SS Group One”, “SS Group Two” and “SS Group Three”, with the lattermost also featuring the Holden 5.0-litre V8 in a higher state of tune). The SS sedans were initially exclusively Maranello Red in color, but were later also made available in Alabaster White. The Group Three-tuned V8 produces 184 kW (250 PS; 247 hp) at 4750 rpm.

This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on how to create a sign or plate to YOUR design

PLEASE CLICK HERE

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • HOLDEN HG MONARO GTS350

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN HG MONARO GTS350 is of course the iconic Holden. The HOLDEN MONARO was an automobile produced by General Motors-Holden's in Australia between 1968 and 1977 and between 2001 and 2006. Three generations of the Monaro have been produced, with the last spawning an all wheel-drive variant, export models and various concept cars. Released on 26 July 1970, the HG Monaro was the last of the original coupé design concept. HG had cleaner lines with brightwork reduced and some re-designed. The HG sported different striping which were known as "sidewinder" stripes which ran along the top edge of the fenders, under the windows and finishing just before the rear pillar. The "Monaro" badge on both rear pillars was introduced to all models. For the HG GTS, the "GTS" badges now featured black paint fill, received new black-out paint on rocker panels, with the GTS 350 getting bold treatment with new "sidewinder" stripes and bonnet scoop black-outs. "GTS 350" designations now featured gutsier decals on the fenders and boot lid. Wheel arch moldings were deleted on all models. The "GTS 350" models no longer had the 350 Chevrolet badge on the fender, but rather a bold decal stating "350" as well as blackouts that covered the air-vents on the bonnet. The GTS badge originally above the gills in the fenders would be removed and would now be black instead of red (with the badges being placed on the passenger side of the grille and boot). The taillights had a cleaner look and the grille was redesigned. Most mechanical specifications remained the same as HT series, with the exception of Monaro GTS (non-350), which had softened suspension, resulting in a smoother ride. Manual HG GTS 350 retained the suspension from the HT GTS 350. Other upgrades included thicker (HT GTS 350 style) power front disc brakes, now standard for all V8 and the 6-cylinder Monaro GTS. The HG would be the final model for the generation and the last to use the original body shell. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN MODELS

    0 No Rating Yet
    $25.00

    Sadly, the iconic Australian car manufacturer HOLDEN ceased vehicle and engine production in Australia on 20 October 2017. The last car that rolled off the production line in Holden’s Elizabeth factory in Adelaide’s northern suburbs was a red Holden Commodore, which is expected to be a collector’s item. That historic occasion marked the end of almost a century of automotive manufacturing for Australia, and 69 years for Holden. It was the end of the era for the Australian car manufacturing industry. Our HOLDEN MODELS series of plates is very comprehensive featuring several generations of Holdens as shown in the drop down menu - FB FJ, FE, FC, FB, EK, EJ, EH, HD, HR, HK, HT, HG, HQ, HJ, HX, HZ, WB, VB, VC, VE, VF, VH, VK, VL, VN, VP, VR, VS, VT, VX, VY, VZ These HOLDEN MODELS novelty plates are all the two colour pressed embossed standard Aussie size 37cm x 13cm aluminium plate. Our plates are extremely high quality, durable and long lasting and we are proud to say this HOLDEN MODELS range is manufactured in Queensland, Australia. We also have a comprehensive range of pictorial Holden model novelty number plates which can be seen by clicking HERE For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition, and tese novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN FIRST AND LAST

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN FIRST AND LAST is of course a commemorative plate in recognition of Holden car manufacturing in Australia. Sadly, the iconic Australian car manufacturer HOLDEN ceased vehicle and engine production in Australia on 20 October 2017. Holden began manufacturing cars in Port Melbourne in 1948 but the Elizabeth facility didn’t open until 1958, initially building car bodies before becoming a vehicle assembly line in 1965. Holden factories at other sites in NSW, Queensland and Victoria followed before they too were shut. In the end, Holden will have built a total of 7.6 million cars — including more than 2.3 million Commodores, not including exports — versus Ford Australia’s tally of 5.9 million vehicles and Toyota Australia’s total of 3.4 million. The 48-215 was the first model from General Motors in Australia to bear the Holden name. In mainstream parlance, the official name of "Holden 48-215" was eschewed in favour of the shortened "Holden" designation. Following the replacement of the first Holden, the 48-215 gained the unofficial nickname of Holden FX The 7,687,675th vehicle to be produced by the company and the last car that rolled off the production line in Holden’s Elizabeth factory in Adelaide’s northern suburbs was a Redline Holden Commodore SS-V, which is expected to be a collector’s item. That historic occasion marked the end of almost a century of automotive manufacturing for Australia, and 69 years for Holden. It was the end of the era for the Australian car manufacturing industry There are two versions of this plate as shown in the gallery and drop down menu. One with a plain background and the other with the Aussie flag background This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.