HOLDEN FC UTE

HOLDEN FC UTE

$22.95$25.00

Clear

The HOLDEN FC UTEis of course the iconic Holden. The HOLDEN FC was an automobile produced by Holden’s in Australia from 1958 to 1960. Introduced on 6 May 1958, the FC is a facelifted and improved version of the Holden FE series, which it replaced. The FC range consisted of four door sedans in three trim levels, five door station wagons, marketed as “Station Sedans” in two trim levels, a two-door coupe utility and a three-door panel van. The seven models were : Holden Standard Sedan / Holden Standard Station Sedan / Holden Business Sedan / Holden Special Sedan / Holden Special Station Sedan / Holden Utility / Holden Panel Van
Although the FC series was substantially the same as the FE, it featured revisions to the radiator grille, body trim and interior. Minor mechanical improvements were also made, with changes to the engine, suspension, brakes, gearchange linkages and the steering box. The Utility now featured painted rather than chromed grille and headlight rims, as did the Panel Van.
All FC models were powered by a 132-cubic-inch (2.2 L) six-cylinder engine producing 72 brake horsepower (54 kW). This engine was carried over from the FE series, although the camshaft was altered, the compression ratio was increased and torque was improved.

There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang.

This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a plate to your design please click here

Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Additional information

Product Type

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • HOLDEN EH SEDAN

    0 No Rating Yet
    $22.95$24.59

    The HOLDEN EH SEDAN novelty number plate refers to the Holden EH automobile produced by General Motors-Holden in Australia from 1963 to 1965. The EH was released in August 1963 replacing the Holden EJ series and was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). The 179 ci (2900cc) engine was only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box, was called the "EH-S4". The 179ci engine then became available with an up-graded manual gear box, with stronger gears then the 149ci gear box. The three-speed manual (column shift) gear boxes had no synchromesh on first gear, requiring double de-clutching. The 179 ci manual also used an up-graded clutch. A total of 256,959 EH Holdens were produced and sold from 1963 to 1965, when the EH was replaced by the Holden HD series. Holden EH's were offered in the following models: Standard Sedan; Standard Station Sedan; Special Sedan; Special Station Sedan; S4 Special Sedan; Premier Sedan; Premier Station Sedan; Ute (Utility) and Panel Van. Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HR UTE

    0 No Rating Yet
    $22.95$24.59

    The HOLDEN HR UTE novelty number plate refers to the Holden HR range released in April 1966, replacing the Holden HD series which had been in production since 1965. In addition to a revised grille, the HR featured a reworked roofline and larger rear window (on the sedans), revised rear lights (on sedans and wagons) and changes to almost all exterior body panels. Other changes included revised ball joint front suspension, widened track, improved interior trim and woodgrain interior finish for the Premier models. Six months after the launch of the HR, all models were given a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sun visors and a shatterproof interior rearview mirror. Holden HR range offered four-door sedan and five-door station wagon body styles in three trim levels with the six models marketed as follows. Holden Standard sedan (HR 215) ; Holden Standard station sedan (HR 219); Holden Special sedan (HR 225); Holden Special station sedan (HR 229); Holden Premier sedan (HR 235); Holden Premier station sedan (HR 239). Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.