FRENCH POLYNESIA

Description

The flag of FRENCH POLYNESIA is the state flag of the French overseas collectivity, French Polynesia. French Polynesia is divided into five groups of islands: the Society Islands archipelago, composed of the Windward Islands and the Leeward Islands; the Tuamotu Archipelago; the Gambier Islands; the Marquesas Islands; and the Austral Islands. Among its 118 islands and atolls, 67 are inhabited. Tahiti, which is located within the Society Islands, is the most populous island and the seat of the capital of the collectivity, Papeete. It has more than 68% of the population of the islands in 2012. Although not an integral part of its territory, Clipperton Island was administered from French Polynesia until 2007.

The flag was adopted in 1984. Two red horizontal bands encase a wide white band in a 1:2:1 ratio; centered on the white band is a disk with a blue and white wave pattern depicting the sea on the lower half and a gold and white ray pattern depicting the sun on the upper half; a Polynesian canoe rides on the wave pattern; the canoe has a crew of five represented by five stars that symbolize the five island groups; red and white are traditional Polynesian colors. All vessels registered in French Polynesia have to fly the French flag, even for the small ships sailing between the islands, as there is no official French Polynesian civil or state ensign.

Flags come in various types as described below and sizes are commonly referred to in feet rather than metres, so please read about the various types of flag below and then make your selection from the drop down menu

Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall dC)cor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)

Outdoor Flagpole Flags: These are a btrilobalb material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying

Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.

Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the polebs cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)

Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. Itbs a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.

Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m)

Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)

Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags which are available HERE

Patches: These measure 3.5bx2.25b (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks