IF AT FIRST YOU DON’T SUCCEED BUY A FARMALL

IF AT FIRST YOU DON’T SUCCEED BUY A FARMALL

$27.27

SKU: LTS0002 Categories: ,

IF AT FIRST YOU DON’T SUCCEED BUY A FARMALL – The Farmall M depicted on this sign is one of the larger tractors in the Farmall letter series, capable of pulling a three or four bottom plow. Production began in 1939 and continued until 1952 when it was replaced with the Super M. The diesel MD was added to the lineup in 1941 and cost one and a half times as much as the gasoline M. Affectionately called the “Big brother to the Model H”, it had the same frame and layout of the Model H so that mountable implements were interchangeable.
The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.

Farmall was a model name and later a brand name for tractors manufactured by the American company International Harvester (IH). The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH.

Farmalls were general-purpose tractors. Their origins were as row-crop tractors, a category that they helped establish and in which they long held a large market share. During the decades of Farmall production (1920s to 1970s), most Farmalls were built for row-crop work, but many orchard, fairway, and other variants were also built. Most Farmalls were all-purpose tractors that were affordable for small to medium-sized family farms and could do enough of the tasks needed on the farm that the need for hired hands was reduced and the need for horses or mules was eliminated. Thus Farmall was a prominent brand in the 20th-century trend toward the mechanization of agriculture in the US.

Enjoying a production run that spread out over 14 years, over 290,000 of these machines were produced. Around 1940, the cost of the Farmall M was around $1,100. The cost of the Farmall MD was around $1,700.

Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed.

Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today!

The image design on this sign is copyright to CNH America LLC of whom Farmall and IH are trademarks. Manufactured under licensing to Desperate Enterprises Inc UPC 605279117420. ICCD 12811

BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on how to create a sign or plate to YOUR design

PLEASE CLICK HERE

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • FARMALL IH LOGO ENAMEL KEY CHAIN

    0 No Rating Yet
    $12.73

    The FARMALL IH LOGO ENAMEL KEY CHAIN is a great gift for the enthusiast We now supply a great range of novelty key rings, key chains and key lanyards which are fun colourful products featuring favourite movie characters from Disney or Warner Bros, as well as many popularly recognised logos. The automotive range of key rings, key chains and key lanyards compliments our huge range of Novelty number plates and signs. They are made to the highest quality by a US based company that has been partnering with the strongest, most well-known, iconic brands in the world, becoming the leader in licensed Automotive Accessories for over 40 years. The same company that has been supplying our quality automotive license plates for many years, and like the plates are all US licensed. The materials used vary as listed below and are described in the various product posts. Materials used range from: Heavy duty metal with an enamel finish Leather strap with metal logo Rubber with raised sections Plastisol - PVC in a liquid plasticizer resulting in a permanently solid product Lanyards are woven with a quick release safety breakaway clip on strap - approx: 60cm long x 2cm wide The key ring is 3 cm diameter chrome plated split ring with a clip to secure the keys Each FARMALL IH LOGO ENAMEL KEY CHAIN is individually packaged, ready to display We also offer two different display stands for these products - website details of the stands are shown at this link - Our large stand is very robust double sided black Perspex like material with a capacity for over 200 items, using 25 x 5cm hooks and 25 x 7cm hooks. It measures 51cm high by 39cm  wide with a 12cm deep base The small stand is black powder coated wire with 8 hooks each 5cm in length and they rotate on a central spindle    

  • IF IT AINT RED FARMALL

    0 No Rating Yet
    $27.27

    The IF IT AINT RED FARMALL tin sign - Farmall was a model name and later a brand name for tractors manufactured by the American company International Harvester (IH). The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH. First produced in the USA on 21 June 1939, the Farmall A was released in Australia in March 1940 although some had been imported by the end of 1939. An IHC sales and promotional tour of regional Victoria and southern NSW took place in March-April 1940. The small 1621 kg Farmall A tractor was one of an all new series of International Harvester Co. tractors released in the USA in 1939. These new tractors were 'styled' by well-known industrial designer Raymond Loewy to boost sales by improving their visual appeal with slatted grills and curved panels. The Farmall A also featured an offset drivers' seat on the left to allow a clear view of the front wheel and any under-mounted cultivating implements. This feature was heavily promoted by IHC as 'Culti-vision' or 'Clear-vision'. It was specifically designed for cultivation on smaller farms but could be fitted with a variety of IHC implements including mowers and lifting arms. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The image design on this sign is copyright to CNH America LLC of whom Farmall and IH are trademarks. Manufactured under licensing to Desperate Enterprises Inc UPC 605279116645. ICCD 12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • John Deere 80 Diesel

    0 No Rating Yet
    $27.27

    The John Deere 80 Diesel 1955-1956 circular sign features the Model 80 Diesel which was introduced to improve on the Model R by about 17 horsepower and the Model 70 Diesel by about 15. The John Deere Model 80 had a new cooling system with water pump, increased hydraulic power that was now live, live PTO, power steering, a new center main bearing on the crankshaft, and new 6 speed transmission with an optional creeper first gear. The two cylinder diesel engine on the 80 had a bore and stroke of 6 1/8 x 8 inches, 471 cid, 1125 rpm, compression ratio was 16:1. At Nebraska the 80 tested at 60.04 drawbar and 65.33 belt horsepower, setting a new fuel economy record. This is a John Deere official licensed and copyright product - 49X95 This circular sign comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. Circular Signs are 30cm (12 ins) diameter with mounting holes, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.