SHOP HERE

    • BUILT FORD TOUGH

      0 No Rating Yet
      $27.27

      BUILT FORD TOUGH  features Ford Motor Company - the American multinational automaker headquartered in Dearborn, Michigan, a suburb of Detroit. It was founded by Henry Ford and incorporated on June 16, 1903. The company sells automobiles and commercial vehicles under the Ford brand and most luxury cars under the Lincoln brand. Ford also owns Brazilian SUV manufacturer, Troller, and Australian performance car manufacturer FPV. In the past, it has also produced tractors and automotive components. Ford owns an 8% stake in Aston Martin of the United Kingdom, and a 49% stake in Jiangling of China. It also has a number of joint-ventures, one in China (Changan Ford), one in Taiwan (Ford Lio Ho), one in Thailand (AutoAlliance Thailand), one in Turkey (Ford Otosan), and one in Russia (Ford Sollers). It is listed on the New York Stock Exchange and is controlled by the Ford family, although they have minority ownership (but majority of the voting power). Ford introduced methods for large-scale manufacturing of cars and large-scale management of an industrial workforce using elaborately engineered manufacturing sequences typified by moving assembly lines; by 1914, these methods were known around the world as Fordism. Ford's former UK subsidiaries Jaguar and Land Rover, acquired in 1989 and 2000 respectively, were sold to Tata Motors in March 2008. Ford owned the Swedish automaker Volvo from 1999 to 2010. In 2011, Ford discontinued the Mercury brand, under which it had marketed entry-level luxury cars in the United States, Canada, Mexico, and the Middle East since 1938. During the financial crisis at the beginning of the 21st century, it was close to bankruptcy, but it has since returned to profitability. Ford is the second-largest U.S.-based automaker (preceded by General Motors) and the fifth-largest in the world (behind Toyota, VW, Hyundai-Kia and General Motors) based on 2015 vehicle production. At the end of 2010, Ford was the fifth largest automaker in Europe. Ford is the eighth-ranked overall American-based company in the 2010 Fortune 500 list, based on global revenues in 2009 of $118.3 billion. In 2008, Ford produced 5.532 million automobiles and employed about 213,000 employees at around 90 plants and facilities worldwide. The company went public in 1956 but the Ford family, through special Class B shares, still retain 40 percent voting rights Large square parking sign size: comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. Signs are 30x30cm (12x12 ins) square with mounting holes, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition. This is a Ford Licensed product used under licence 49X95. Ford Hologram code: 9681 If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • GALAXIE 500 1963

      0 No Rating Yet
      $27.27

      GALAXIE 500 1963 The Ford Galaxie was a full-sized car that was built in the USA by Ford for model years 1959 - 1974. The name was used for the top models in Ford's full-size range from 1958 until 1961, in a marketing attempt to appeal to the excitement surrounding the Space Race. For 1962, all full-size Fords wore the Galaxie badge, with "500" and "500/XL" denoting the higher series. The Galaxie 500/LTD was introduced for 1965 followed by the Galaxie 500 7-Litre for 1966. The Galaxie 500 part was dropped from the LTD in 1966, and from the XL in 1967; however the basic series structuring levels were maintained. The "regular" Galaxie 500 continued below the LTD as Ford's mid-level full-size model from 1965 until its demise at the end of the 1974 model year. The 1963 'Lightweight' model depicted on this sign was essentially unchanged from earlier models save for some freshening and added trim; windshields were reshaped and a four-door hardtop 500/XL was added. A lower, fastback roofline was added mid-year to improve looks and make the big cars more competitive on the NASCAR tracks with the added downforce. This 1963½ model, the industry's first official "½ year" model, was called the "sports hardtop" or "fastback" (it shared this feature with the for 1963½ Falcon). Galaxie buyers showed their preference as the new sports hardtop models handily outsold the "boxtop" square-roof models. The sports hardtop was available in both Galaxie 500, and Galaxie 500/XL trim. Mercury also received the new roofline (under the Marauder badge) in Monterey, Montclair, and Park Lane models. This year, a no-frills big Ford, priced around $100.00 below the base Galaxie sedans. was offered, badged as the Ford 300. It was offered for 1963 only, and was replaced by the Custom series in 1964. The "Swing-away" steering wheel became optional. The first two lightweight Galaxies, using 289 cu in (5 l) bodies, were assembled at Wayne, Michigan, late in January 1963, to be tested at the 1963 Winternats. They were delivered to Tasca Ford (East Providence, Rhode Island) and Bob Ford (Dearborn, Michigan). Bill Lawton's Tasca Galaxie turned the best performance, with a 12.50 pass at 116.60 mph (187.65 km/h). It was not enough against the 1963 Chevrolet Impala Z-11s in Limited Production/Stock, however. Three more were assembled from parts and tested at Ford's Experimental Garage in Dearborn. One of the next two, the last Winternationals test cars, was prepared by Bill Stroppe in Long Beach, California, for Les Ritchey; it was featured in the July 1963 issue of Hot Rod. For all their efforts, Ford discovered the Galaxies were still too heavy, and the project was abandoned. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2003 Ford Motor Company under license to Sign Of The Times with images by DavidG Photography BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • THUNDERBIRD COLLAGE 1955-2002

      0 No Rating Yet
      $27.27

      THUNDERBIRD COLLAGE 1955-2002. The Ford Thunderbird images shown on this great looking sign are (clockwise from right of logo) - 1958 Thunderbird; 1963 Thunderbird Sports Roadster; 1965 Thunderbird; 2002 Thunderbird Convertible; 1957 Thunderbird Convertible; 1956 Thunderbird Convertible; 1955 Thunderbird Convertible The Ford Thunderbird is an automobile that was manufactured by Ford in the United States over eleven model generations from 1955 through 2005. The Thunderbird created a market niche that eventually became known as the personal luxury car. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2003 Ford Motor Company under license to Sign Of The Times/Crystal Art Gallery BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CORVETTE AMERICAS ONLY

      0 No Rating Yet
      $27.27

      The CORVETTE AMERICAS ONLY  Tin sign is one of several Chevrolet signs we have. The Chevrolet Corvette featured is a 1958 model.  The Chevrolet Corvette (C1) is the first generation of the Corvette sports car produced by Chevrolet. It was introduced late in the 1953 model year, and produced through 1962. It is commonly referred to as the "solid-axle" generation, as the independent rear suspension did not appear until the 1963 Sting Ray. The Corvette was rushed into production for its debut model year to capitalize on the enthusiastic public reaction to the concept vehicle, but expectations for the new model were largely unfulfilled. Reviews were mixed and sales fell far short of expectations through the car's early years. The program was nearly canceled, but Chevrolet would ultimately stay the course. 1958–1960 models: 1958 Corvette Convertible: In an era of chrome and four headlamps, the Corvette succumbed to the look of the day. The 1958 model year and the four that followed all had the exposed four-headlamp treatment and prominent grills, but a faux-louvered hood and chrome trunk spears were unique to 1958. The interior and instruments were updated, including placing a tachometer directly in front of the driver. For the 1958 model, an 8000 rpm tachometer was used with the 270 hp (200 kW) and 290 hp engines, rather than the 6000 rpm units used in the lower horespower engines. Optional engine choices included two with twin carburetors (including a 270 hp model with Carter 2613S and 2614S WCFB four-barrels) and two with fuel injection. Power output for the highest rated fuel-injected engine was 290 hp. Displacement remained 283 cid. For the first time, seat belts were factory-installed rather than being dealer-installed as on previous models. Rare options were RPO 684 heavy-duty brakes and suspension (144), RPO 579 250 hp engine (554), RPO 276 15"×5.5" wheels (404). Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2005 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed (to Dixie Souvenirs) by Desperate Enterprises.  UPC 605279107209 ICC DES 12 8 11. It is a GM official licensed product - Hologram code: 99L1235 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • 1957 CADILLAC DAGMARS

      0 No Rating Yet
      $27.27

      The 1957 CADILLAC DAGMARS Tin sign is one of several Cadillac signs we stock. Dagmar refers to the car's bumpers - it's a slang term for chrome conical shaped styling elements which began to appear on the front bumper/grille assemblies of certain American automobiles following World War II. They reached their peak in the mid-1950s. The term is derived from the notable physical attributes of Dagmar, a buxom early 1950s television personality known for low-cut gowns and pronounced conical bra cups. She was amused by the tribute. She used the stage name Dagmar (born Virginia Ruth Egnor, November 29, 1921 – October 9, 2001) and was an American actress, model, and television personality of the 1950s. As a statuesque, busty blonde, she became one of the first major female stars of television, receiving much press coverage during that decade. The bottom script of the sign reads - The 1957 Cadillac struts "Dagmars". Virginia Rush Egnor was a busty blonde who went by the name Dagmar on NBC's 1950 Late-night talk show 'Broadway Open House'. During the same period, Cadillacs began sprouting a pair of protrusions from their front bumpers and since the cars had long been connected to celebrities, the comparison of the bumper feature and Dagmar's chest was a natural Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by General Motors used under licensing to Sign Of The Times - No UPC provided BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • RESERVED

      0 No Rating Yet
      $25.00

      The RESERVED novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • DODGE CHARGER

      0 No Rating Yet
      $20.00

      DODGE CHARGER - the GENERAL LEE 1969 DODGE CHARGER novelty number plate was the name given to a 1969 Dodge Charger driven by the Duke cousins Bo and Luke; along with cousins Coy and Vance in the television series The Dukes of Hazzard. It is known for its signature horn, its police chases, stunts — especially its long jumps — and for having its doors welded shut, leaving the Dukes to climb in and out through the windows. The car's name is a reference to American Civil War general Robert E. Lee. It bears a Confederate flag (a rectangular variant of the square battle flag of Lee's Army of Northern Virginia) on its roof, and also has a horn which plays the first twelve notes of the song "Dixie". Our DODGE CHARGER comes standard as flat and non-embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate or sign to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • JOHN DEERE VINTAGE LOGO

      0 No Rating Yet
      $24.00

      The brand name John Deere, belongs to Deere & Company – an American corporation that manufactures agricultural, construction, and forestry machinery, diesel engines, drivetrains (axles, transmissions, gearboxes) used in heavy equipment, and lawn care equipment. In 2013, it was listed as 85th in the Fortune 500 America’s ranking and 307th in the Fortune Global 500 ranking. Deere & Company began when John Deere, moved to Grand Detour, Illinois in 1836 in order to escape bankruptcy in Vermont. Already an established blacksmith, Deere opened a 1,378 square feet (128 m2) shop in Grand Detour in 1837 which allowed him to serve as a general repairman in the village, as well as a manufacturer of small tools such as pitchforks and shovels. Small tools was just a start, the item that set him apart, was cast-steel plow, which was pioneered in 1837. Prior to Deere’s steel plow, most farmers used iron or wooden plows which stuck to the rich Midwestern soil and had to be cleaned frequently. The smooth sided steel plow solved this problem, and greatly aided migration into the American Great Plains in the 19th and early 20th century. There have been many variations on the JD logo over the years as shown below Our JOHN DEERE VINTAGE LOGO comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition This is a John Deere Licensed product used under licence 49X95.  Plate code 2680 If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHURNING WATERS GUIDE SERVICE

      0 No Rating Yet
      $27.27

      The CHURNING WATERS GUIDE SERVICE Tin sign is one of many in our fishing category. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by Jon Q Wright represented by JQ Licensing - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 6052791118144  D120811. BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHEVY POWER SINCE 1911

      0 No Rating Yet
      $27.27

      The CHEVY POWER SINCE 1911 Tin sign features Chevrolet, colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121991  ICCD12811. It is a GM official licensed product ref 99A1838 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHEVROLET TRUCKS

      0 No Rating Yet
      $27.27

      The CHEVROLET TRUCKS Tin sign features Chevrolet, colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121977  ICCD12811. It is a GM official licensed product ref 99A1835 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • MAN CAVE WOLF ENTRANCE

      0 No Rating Yet
      $27.27

      The MAN CAVE WOLF ENTRANCE Tin sign is one of several we have in our Man Cave range - it is a Patrick Ollila design Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 Patrick Ollila represented by JQ Licensing - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121984  ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • ABE LINCOLN QUOTES

      0 No Rating Yet
      $27.27

      The ABE LINCOLN QUOTES Tin sign is one of several we have in our famous people range Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 Ephemera Inc and licensed courtesy of bCreative.com - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121960  ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • YOGA CLASS

      0 No Rating Yet
      $27.27

      The YOGA CLASS Tin sign is one of several we have in an ephemera range Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 Ephemera Inc and licensed courtesy of bCreative.com - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121939  ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • IF LIFE HANDS YOU MELONS

      0 No Rating Yet
      $27.27

      The IF LIFE HANDS YOU MELONS Tin sign is one of several we have in an ephemera range Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 Ephemera Inc and licensed courtesy of bCreative.com - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121915  ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • GENUINE CHEVROLET SILVER BOWTIE ON BLACK

      0 No Rating Yet
      $20.00

      GENUINE CHEVROLET SILVER BOWTIE ON BLACK plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. GM Trademarks used under licence to 49X95 - GM barcode 99A0023 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHEVROLET POWER

      0 No Rating Yet
      $20.00

      CHEVROLET POWER plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced GM Trademarks under license to 49X95   7N9S9UR3- GM barcode C21031 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHEV Gold Logo Checkerplate

      0 No Rating Yet
      $20.00

      The CHEV Gold Logo Checkerplate plate comes standard as flat non embossed and made from high quality tin. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced GM Trademarks used under license to Racing Reflections Inc  Barcode 75806000785 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HJ MONARO GTS SEDAN

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HJ MONARO GTS SEDAN novelty plate shows the car that was produced by Holden in Australia 1968 and 1977 and between 2001 and 2006. Three generations of the Monaro have been produced, with the last spawning an all wheel-drive variant, export models and various concept cars. The HJ followed the HQ, and a heavy facelift and some model rationalisation was applied to the HJ Monaro, which was released in October 1974. Its front end bears a resemblance to the 1970–1972 American Chevrolet Monte Carlo. The 350 V8 engine option and the base Monaro coupé were both discontinued. The Monaro GTS continued to be available as a coupé or sedan with 253 in3 (4,150 cc) V8 power, or the optional 308 in3 (5,050 cc) V8 engine. The GTS sedan was now a model of its own—in HQ the GTS sedan was an optioned Kingswood. The Monaro LS coupé also continued within the range, but still with the 3.3-litre six-cylinder engine as its base power unit. The body paint-outs were discontinued in the HJ Monaro GTS range, but for the first time, the Monaro could be dressed up with optional front and rear spoilers. It seemed that Holden were no longer interested in promoting the Monaro GTS coupé as a performance machine and this became all the more obvious with the HJ series coupé having retained the HQ model's rear body styling. The HJ Monaro LS coupé is close to being the rarest regular production car ever made in Australia with only 337 units produced. The HJ Monaro GTS coupé was discontinued during 1975 due to falling demand,606 examples having been produced This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HZ KINGSWOOD PANEL VAN

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HZ KINGSWOOD PANEL VAN novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HZ KINGSWOOD PANEL VAN & UTE

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HZ KINGSWOOD PANEL VAN & UTE novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HZ KINGSWOOD UTE

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HZ KINGSWOOD UTE novelty plate shows the car that was produced by Holden in Australia from October 1977 - 1980 in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand. Wikipedia tells us that the Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride quality. Modern Motor magazine described the HZ as "a great handler spoiled by the car" in a comparison against the BMW 528i, contrasted as "a great car spoiled by the handling". In this series, the base specification Belmont was deleted and the new Kingswood SL became the base luxury level for sedans and wagons, with a lower specification Kingswood sedan and wagon only offered as a delete option on the Kingswood SL. During the course of the HZ series, equipment levels were upgraded in 1978 effectively to match improvements in the opposition Ford Falcon range, but the life of the full W size Holden looked set to end following Holden's release of the VB Commodore in November 1978. After 1980, W sized Holden passenger cars were cancelled—replaced by the downsized Commodore. The Kingswood luxury level lived on until 1985 on the WB Holden utility but the end of HZ saw the end of the Holden Premier alongside both the GTS and Sandman which were both deleted prior to the end of the HZ series. The Holden HZ was offered in four sedan and three station wagon models, marketed as follows: Holden Kingswood Sedan / Holden Kingswood Wagon / Holden Kingswood SL Sedan / Holden Kingswood SL Wagon / Holden Premier Sedan / Holden Premier Wagon / Holden GTS / It was also available in two coupe utility, two panel van and one cab chassis model, marketed as follows: Holden Ute / Holden Kingswood Ute / Holden Van / Holden Kingswood Van / Holden One Tonner (cab chassis) There were two special vehicle packages also available based upon commercial vehicles: Holden Sandman Ute and Holden Sandman Van This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CORVETTE STINGRAY C3

      0 No Rating Yet
      $22.95$24.59

      The CORVETTE STINGRAY C3 novelty plate shows the third generation Chevrolet Corvette C3 Stingray - a sports car that was produced by Chevrolet for the 1968 through 1982 model years. Engines and chassis components were mostly carried over from the previous generation, but the body and interior were new. It set new sales records with 53,807 produced for the 1979 model year. The C3 is the third generation of the Chevrolet Corvette, while the 1969 through 1976 models mark the second generation of the Corvette Stingray. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HT PREMIER UTE

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HT PREMIER UTE novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • PUG WITH PAWS

      0 No Rating Yet
      $20.00

      The Pug is a breed of dog with a wrinkly, short-muzzled face, and curled tail. The breed has a fine, glossy coat that comes in a variety of colours, most often fawn or black, and a compact square body with well-developed muscles. Pugs were brought from China to Europe in the sixteenth century and were popularized in Western Europe by the House of Orange of the Netherlands, and the House of Stuart. In the United Kingdom, in the nineteenth century, Queen Victoria developed a passion for pugs which she passed on to other members of the Royal family. Pugs are known for being sociable and gentle companion dogs. The breed remains popular into the twenty-first century, with some famous celebrity owners. A pug was judged Best in Show at the World Dog Show in 2004. This plate comes standard as completely flat and non-embossed  and made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • BEER AUSSIE MAN’S DRINK

      0 No Rating Yet
      $22.95$24.59

      The BEER AUSSIE MAN'S DRINK novelty plate. Australian men take their beer seriously and there is certainly a bit of confusion when ordering beers in different Aussie states. The most popular beer sizes in Australia include… A jug, which is 1140ml or 40 fluid ounces and is designed for sharing with your mates A pint is a 570ml (20 oz) glass but in South Australia, it is called an Imperial Pint because they call the 450ml glass a Pint A schooner is a 450ml (15 oz) glass, except in South Australia where it is called a Pint. Schooners are usually served in New South Wales but also exist in Victorian or Western Australian pubs too. A pot is served in a 285ml (10 oz) glass, but it has a variety of other names such as Half Pint, Middy, Handle or Ten. This is a popular option if you are after a quick drink. Here is a quick rundown by state of what beer sizes are called. VICTORIA SOUTH AUSTRALIA WESTERN AUSTRALIA NEW SOUTH WALES / CANBERRA Horse or Pony 140ml Small glass 170ml Glass 200ml Pot 285ml Schooner 425ml Pint 570ml Pony 140ml Butcher 200ml Schooner 285ml Pint  425ml Imperial Pint 570ml Shetland 115ml Pony 140ml Bobbie or Six (fl oz) 170ml Glass 200ml Middy or Half Pint 285ml Schooner 425ml Pint 570ml Pony 140ml Seven (fl oz) 200ml Middy or Half Pint 285ml Schmiddy 350ml Schooner 425ml Pint 570ml QUEENSLAND TASMANIA NORTHERN TERRITORY Pony 140ml Seven (fl oz) 200ml Pot 285ml Schooner 425ml Pint 570ml Small beer 115ml Six (fl oz) 170ml Seven (fl oz) 200ml Seven (fl oz) or a Pot 285ml Fifteen (fl oz) or a schooner 425ml Pint 570ml Seven 200ml Handle 285ml Schooner 425ml Pint 570ml This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CAMARO SS

      0 No Rating Yet
      $22.95$24.59

      The CAMARO SS novelty plate shows the first generation Chevrolet Camaro that appeared in Chevrolet dealerships in September 1966, for the 1967 model year on a brand-new rear-wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible with a choice of six-cylinder and V8 power plants. The first-generation Camaro was built through the 1969 model year. The Camaro's standard drive train was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) or a 327 cu in (5.4 L) (307 cu in (5.0 L) later in 1969) V8 engine, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS396 cars was the Turbo 400 three-speed automatic. There was a plethora of other options available all three years, including three main packages: The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model. The SS performance package consisted of a 350 or 396 cu in V8 engine and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging. The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am series. It included a solid-lifter 302 V8, 4-speed transmission, power disc brakes, and two wide stripes down the hood and trunk lid. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • MINI THREE MODELS

      0 No Rating Yet
      $22.95$24.59

      The MINI THREE MODELS novelty plate shows three models of the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. BMW acquired the Rover Group (formerly British Leyland) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using the MINI name This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • MINI COOPER S

      0 No Rating Yet
      $22.95$24.59

      The MINI COOPER S novelty plate shows the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HT KINGSWOOD UTE & SEDAN

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HT KINGSWOOD UTE & SEDAN novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HT KINGSWOOD UTE

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HT KINGSWOOD UTE novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HT KINGSWOOD SEDAN

      0 No Rating Yet
      $22.95$24.59

      The HOLDEN HT KINGSWOOD SEDAN novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.