New items October 2019

In our “New Items” categories you will find the latest additions to our ever expanding stock of novelty number plates, signs, flags and other novelty goods. Our newest products are listed by month of arrival and we only retain the last three months new releases, clearing the monthly folders after 3 months on display. So if you are looking for something new and fresh please have a browse through these categories. We also would welcome your suggestions for new items. For instance, if you have a favourite vehicle that you would like portrayed on a novelty number plate; then just get in touch with us and we will try and help you out. Many of our new products have originated as suggestions from customers

Please Note: If the product in this NEW PRODUCTS category is marked as ‘out of stock’ that’s simply to let you know that its been manufactured and is en route to our store, but isn’t yet physically “on the shelf”. New products normally become available very quickly, and we then change the status to ‘in stock’ and you can order it.

  • HALLS GAP

    0 No Rating Yet
    $23.50$25.10

    HALLS GAP is is a town in Victoria, located on Grampians Road, adjacent to the Grampians National Park. The town is set in the Fyans Valley at the foot of the Wonderland and Mount William ranges. Gariwerd, as The Grampians is traditionally known, still bears the marks of its rich history. An Indigenous culture at Brambuk, the National Park and Cultural Centre. Ancient oven mounds, scatterings of stone left over from tool making, rock art sites and learn about the traditional beliefs handed down from one generation to the next. Guided tours to ancient Aboriginal rock art shelters are also available. See what the TOURISM website has to say by clicking HERE This plate comes standard as a flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.  

  • PARKES

    0 No Rating Yet
    $23.50$25.10

    PARKES is a town in the Central West region of NSW located on the Newell Highway due west of Sydney between Forbes and Dubbo. It is 357 km from Sydney and 339 m above sea-level. Every country town dreams of coming up with a tourist magnet - a special museum, an event, a "big" thing - which will lure visitors and enrich the local economy. One of the most unique success stories has to be Parkes where, over twenty years ago, the townsfolk thought that an Elvis Presley festival might bring in a few, much needed, tourist dollars. Today the five day event attracts over 18,000 people to the town and includes such unforgettable events as a Miss Priscilla Competition, an Elvis Street parade, an Elvis Gospel Service and, the centrepiece, an Elvis look alike competition. Of course, Parkes is much more than five days in January. It is equally famous for the Parkes Radio Telescope and it is a thriving service centre with a strong commercial and industrial base. Major employers in the district include the North Broken Hill Peko copper and gold mine and a major wheat-storage centre. In 2000 the Parkes Radio Telescope became an Australian movie icon when it played a central role in the gentle comedy, The Dish. Located 20 km north of Parkes it was built by the CSIRO between 1959-1961 and was the first big-dish antenna radio telescope in the Southern Hemisphere. It is a massive 64 metres in diameter. The site was chosen because the area was known to have very few high winds and it was sufficiently isolated to avoid radio interference. Today it is still one of the world's most powerful telescopes. Its primary function is to collect, magnify and analyse radio waves and as such in its early years of operation it played a vital role in the detection of quasars, the first pulsars outside of the Milky Way galaxy and the centre of an exploding galaxy at the extreme edge of the known universe See what the TOURISM website has to say by clicking HERE This plate comes standard as a flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.  

  • NARACOORTE

    0 No Rating Yet
    $23.50$25.10

    NARACOORTE is a town in the Limestone Coast region of South Australia, approximately 336 kms south-east of Adelaide and 100 kms north of Mount Gambier on the Riddoch Highway (A66). See what the TOURISM website has to say by clicking HERE This plate comes standard as a flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.  

  • GRAMPIANS

    0 No Rating Yet
    $23.50$25.10

    GRAMPIANS is short for The Grampians National Park (also Gariwerd), commonly referred to simply as The Grampians. It's located in the Grampians region of Victoria. The 413,210 acre national park is situated between Stawell and Horsham on the Western Highway and Dunkeld on the Glenelg Highway, 260 kms west of Melbourne and 460 kms east of Adelaide. Proclaimed as a national park on 1 July 1984, the park was listed on the Australian National Heritage List on 15 December 2006 for its outstanding natural beauty and being one of the richest indigenous rock art sites in south-eastern Australia. The Grampians feature a striking series of sandstone mountain ranges. See what the TOURISM website has to say by clicking HERE This plate comes standard as a flat and non-embossed plate and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition The design and photography of this plate is the property of Dixie Souvenirs If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.  

  • REDUCED BY 25%
    QUICK VIEW

    MITSUBISHI

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    The MITSUBISHI frame is the ideal gift for the proud MITSUBISHI owner. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is white, but the words can be done in other colours on request. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow, Lime Green and Pink 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order – CLICK HERE FOR CUSTOM MADE FRAME DETAILS Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable

  • REDUCED BY 25%
    QUICK VIEW

    EELS FOR LIFE

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    The EELS FOR LIFE frame is the ideal gift for the Parramatta Eels fan! The Parramatta Eels are an Australian professional rugby league football club based in the Sydney suburb of Parramatta. The Parramatta District Rugby League Football Club was formed in 1947, and their home ground was Parramatta Stadium (formerly Cumberland Oval). As of 2019, Parramatta's home ground stadium has been rebuilt and they now play as the majority tenants at Western Sydney Stadium, which sits on the same site that was once Parramatta Stadium.. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is yellow for this blue frame, but the words can be done in other colours on request. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order – CLICK HERE FOR CUSTOM MADE FRAME DETAILS Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable

  • MERCURY MONTEREY

    0 No Rating Yet
    $23.50$25.10

    The MERCURY MONTEREY is a series of full-size cars that were manufactured and marketed by the Mercury division of Ford from 1952 to 1974. Deriving its name from Monterey Bay, the Mercury Monterey served as the replacement for the Mercury Eight, the debut model line of the Mercury division. During its production, the Monterey would be offered in multiple body styles, ranging from coupes, sedans, hardtops, and station wagons. Over its 22 years of production, the Monterey served as the flagship, mid-range, and entry-level offering of the full-size Mercury product range. The only Mercury nameplate to be in continuous production throughout the 1960s, the Monterey was slotted above the Medalist, Custom, and Meteor; later, it was slotted below the Turnpike Cruiser, Montclair, Park Lane, and Marquis. Following the 1974 model year, Mercury discontinued the Monterey, consolidating its full-size range down to the Marquis and Colony Park station wagon. For 2004, the Monterey nameplate was revived, becoming the counterpart of the Ford Freestar minivan; it was produced through the 2007 model year. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CITROEN TRACTION AVANT

    0 No Rating Yet
    $23.50$25.10

    Our CITROEN TRACTION AVANT is of course the car manufactured by the French. They were a range of mostly 4-door saloons and executive cars, with four or six-cylinder engines, produced by the French manufacturer Citroën from 1934 to 1957. Approximately 760,000 units were produced. The Traction Avant pioneered mass-production of three revolutionary innovations widely adopted since, and still used today: front-wheel drive, four-wheel independent suspension, and the use of a crash resistant, unitary, monocoque body. Additionally, the car was one of the earliest mass-production adopters of rack and pinion steering. Although the car's name emphasized its front-wheel drive power delivery ("Traction Avant" literally means “front traction”) – the car stood out at least as much by its much lower profile and stance – made possible by the absence of a separate chassis under the car's unitary body – sharply distinguishing it visually from its contemporaries. They were designed by André Lefèbvre and Flaminio Bertoni in late 1933 / early 1934, and pioneered front-wheel drive on the European mass car market, along with DKW's and Adler's 1930s models. Front-wheel drive had just appeared for the first time through luxury vehicle manufacturers Alvis, which built the 1928 Racing FWD in the UK, and Cord, which produced the L29 from 1929 to 1932 in the United States. The Traction Avant's structure was a welded unitary body / chassis. Most other cars of the era were based on a separate frame (chassis) onto which the non-structural body ("coachwork") was built. Unitary construction (also called Unit Body or "Unibody" in the US) results in a lighter vehicle, and is now used for virtually all car construction This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN VZ COMMODORE HSV GTO

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN VZ COMMODORE HSV GTO is of course the car manufactured by Holden in Australia. The enhanced performance VZ range sold by Holden Special Vehicles (HSV) was released in 2004 as the Z Series. In December 2013, GM announced that it would discontinue all Australian production in 2017. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN VF COMMODORE SS

    0 No Rating Yet
    $23.50$25.10

    Our HOLDEN VF COMMODORE SS is of course the car manufactured by Holden in Australia. It was an executive car produced by Holden between June 2013 and October 2017 and was the second and last significantly restyled iteration of the fourth (and final) generation of the Holden Commodore to be manufactured in Australia. Its range included the sedan and station wagon variants that sold under the luxury Holden Calais (VF) nameplate. Also available was the commercial utility variant that sold under the Holden Ute (VF) nameplate. From 2013 to 2017 an improved version of the Commodore SS V sedan was exported to the United States badged as the Chevrolet SS; an evolution of the badging practice used on the previous-generation Commodore that was sold in North America as the Pontiac G8 from 2008 to 2009, prior to the Pontiac brand being discontinued. Holden Special Vehicles (HSV) used the VF series as the basis of its performance Gen-F sedan, wagon and utility models, which were also exported to the United Kingdom rebadged as the Vauxhall VXR8 range. In December 2013, GM announced that it would discontinue all Australian production in 2017. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HSV MALOO

    0 No Rating Yet
    $23.50$25.10

    Our HSV MALOO plate features a super fast car made by Holden Special Vehicles (HSV) - the officially designated performance vehicle partner of Australian marque, Holden. The HSV Maloo is a performance utility that has been produced since 1990 and was based on the Holden Ute. Its distinguishing features have been high-performance V8 engines and full body kits. The name "Maloo" means "thunder" in an Aboriginal language. It is said that former HSV managing director, John Crennan, coined the name for the vehicle after reading a book on Aboriginal Australians. In 2001, HSV introduced a higher "R8" specification. In June 2006, a regular production Z Series Maloo R8 broke the record for the world's fastest production performance pickup, at 271 kph,  beating the previous record holder, a Dodge Ram SRT-10 by 22 kph. The Maloo has been built over the following series: VG (1990–1991) VP (1991–1993) VR (1993–1995) VS (1995–2000) VU (2000–2002) VY (2002–2004) VZ (2004–2007) VE (2007–2013) VF (2013–2017) The most powerful and developed version was the Gen-F 430 kW GTS Maloo, which was launched in November 2014. It featured GTS sedan mechanicals except for the Magnetic Ride Control suspension setup that, due to limited development opportunities, HSV left exclusively for the GTS sedan, Senator Signature and Grange. This Maloo was originally limited to 165 units, later increased to 250 plus 10 for export to New Zealand. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BMC AUSTIN AND MORRIS

    0 No Rating Yet
    $23.50$25.10

    Our BMC AUSTIN AND MORRIS plate features two iconic cars manufactured by the British Motor Corporation (Australia) which formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia) Pty Ltd. Following further corporate changes in the UK in the late 1960s, BMC Australia was absorbed into the newly established British Leyland Motor Corporation of Australia, the name of which became Leyland Motor Corporation of Australia in 1972, and then JRA Limited in March 1983. The Morris Major and Austin Lancer were produced by BMC Australia between 1958 and 1964. They were developed from the contemporary Wolseley 1500 and Riley One-Point-Five models  then on sale in the United Kingdom. The Major and Lancer, along with the Wolseley 1500 were produced at BMC Australia's Victoria Park plant at Zetland in Sydney, and were unique to the country, containing up to 98% local content. The Major and Lancer, as distinct from the sportier and more luxurious Wolseley/Riley cars, shared a similar level of appointment, finish and engine tune with contemporary Morris and Austin models. Although comparatively modest, the Major/Lancer was quite a modern car with a generally high level of comfort, quality and value. The sporting potential of the Major/Lancer was recognised immediately and specially prepared cars were raced into the early 1960s. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • REDUCED BY 25%
    QUICK VIEW

    MY COPPER CAR

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    The MY COPPER CAR frame is the ideal gift for the proud first car owner - or indeed any copper coloured car owner, or even a copper! The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is copper for this frame, but the words can be done in other colours on request. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order – CLICK HERE FOR CUSTOM MADE FRAME DETAILS Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable

  • REDUCED BY 25%
    QUICK VIEW

    MY SILVER CAR

    0 No Rating Yet
    $16.00 $12.00
    You Save upto $4.00 off RRP

    The MY SILVER CAR frame is the ideal gift for the proud first car owner - or indeed any silver car owner. The caption is available on a variety of frame sizes and frame colours as listed below, and in the drop down menu. The frames are injection moulded plastic (ABS UV resistant), and the characters are applied as durable high quality vinyl stickers which are printed on professional sign-making printers and precision cut on a plotter with a very small blade. The frames are weatherproof and long lasting. Our default print colour is silver for this frame, but the words can be done in other colours on request. HOW TO ORDER: First please read the descriptions below. Then using the drop down menus select the frame type, colours and number of frames you want to buy, then click the 'Add to Cart' button. 1) Standard Size: to fit around standard size Aussie Plates (37cm x 13cm), as used in all states. These are available in Black, White, Blue, Yellow and Lime Green 2) Slimline Size: to fit around slimline size Aussie Plates (37cm x 10cm). These are available in Black or White 3) Premium Front: to fit around NSW Premium front plates (37.2cm x 8.4cm) and SA Premium front plates (37.1cm x 8.3cm). These are available in Black 4) Premium Rear: to fit around NSW Premium rear plates (37.2cm x 10.7cm), and SA Premium rear plates (37.1cm x 10.6cm). These are available in Black These days there are many sizes and shapes of number plate so it’s best to measure your plate and be sure our frame will fit your plate. If you would like novelty frames made with your own choice of wording and colours we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order – CLICK HERE FOR CUSTOM MADE FRAME DETAILS Important note about images we provide for novelty frames: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs, colours or fonts may vary slightly from batch to batch. We hope this is helpful and understandable