WESTERN AUSTRALIA

WESTERN AUSTRALIA
Clear
SKU: FL0088 Categories: , ,

The WESTERN AUSTRALIA FLAG was officially adopted by the government of Western Australia in 1953. The flag is based on the defaced British Blue Ensign with the state badge located in the fly. The badge is a gold disc with a native Black Swan, the swan is facing towards the hoist. The black swan has long been a symbol of Western Australia. In fact, the original colony was called the Swan River Colony at the location which is now Perth.

Please read about the various types of flag below and then make your selection from the drop down menu

Flags come in various types as described below and sizes are commonly referred to in feet rather than metres

Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)

Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying

Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.

Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)

Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.

Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m)

Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)

Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags

Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

Additional Information

Flag Size

5x3ft (150x90cm), 3x2ft (90x60cm), 6x3ft (180x90cm) Outdoor, 8.25×5.5cm Patch, Hand Held Waver 1.5x1ft (0.45×0.3m), Desk Flag 6x4inches (16x11cm)

Reviews

There are no reviews yet.

Be the first to review “WESTERN AUSTRALIA”

You may also like…

  • WA 4 EVER

    Aussie states available in this series are ACT 4 EVER; NSW 4 EVER; NT 4 EVER; QLD 4 EVER; SA 4 EVER; TAS 4 EVER; VIC 4 EVER; WA 4 EVERAussie plates are available in a variety of colour combinations – what is shown here is our standard stocked itemExtremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm).  Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

  • I’M A QUEENSLANDER FRAME

    To fit around standard size Aussie Plates (37cm x 13cm) High quantity injection moulded plastic frames in Black, with wording on bottom ...Please note that fonts may vary slightly from batch to batch

  • QUEENSLAND STATE

    The QUEENSLAND STATE FLAG is a British Blue Ensign defaced with the state badge on a white disc. The badge is a light blue Maltese Cross with an imperial crown in the centre. The flag dates from 1876, with minor alteration occurring, the last being in 1901 with the death of Queen Victoria.Please read about the various types of flag below and then make your selection from the drop down menuFlags come in various types as described below and sizes are commonly referred to in feet rather than metresDecorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and dryingNote this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m)Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flagsPatches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • SOUTH AUSTRALIA

    The SOUTH AUSTRALIA STATE FLAG was officially adopted by the government of South Australia State in 1904. It's a British Blue Ensign defaced with the state badge located in the fly. The badge is a gold disc featuring a Piping Shrike with its wings outstretched. The badge is believed to have been originally designed by Robert Craig, a teacher at the School of Arts in Adelaide, and officially gazetted on 14 January 1904 Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (55 or 60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks