USA CONFEDERATE

USA CONFEDERATE
Clear
SKU: FL0034 Categories: ,

The USA CONFEDERATE FLAG is well known internationally. However, it has a checkered/controversial history and was rejected as the US national flag in 1861 but it was instead adopted as a battle flag by the Army of Northern Virginia under General Lee. Despite never having historically represented the USA as a country nor officially recognized as one of the national flags, the USA CONFEDERATE  flag is commonly referred to as “the Confederate Flag” and has become a widely recognized symbol of the South. The USA CONFEDERATE FLAG is also known as the REBEL, DIXIE, or SOUTHERN CROSS and is often incorrectly referred to as the “Stars and Bars”. The actual “Stars and Bars” is the first national flag, which used an entirely different design). Some groups such as the Ku Klux Klan have flown it and some rockabilly fans hold the battle flag as their emblem. In Australia the Rebels Motorcycle Club was originally named the “Confederates” and their insignia is a Rebel flag with a cap-wearing skull and 1% patch in the centre.

Please read about the various types of flag below and then make your selection from the drop down menu

Flags come in various types as described below and sizes are commonly referred to in feet rather than metres

Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)

Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying

Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.

Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)

Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.

Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m)

Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)

Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags

Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

.

Additional Information

Flag Size

5x3ft (150x90cm), 3x2ft (90x60cm), 8.25×5.5cm Patch, Hand Held Waver 1.5x1ft (0.45×0.3m), Desk Flag 6x4inches (16x11cm)

Reviews

There are no reviews yet.

Be the first to review “USA CONFEDERATE”

You may also like…

  • USA CONFEDERATE

    The USA CONFEDERATE FLAG is well known internationally. However, it has a checkered/controversial history and was rejected as the US national flag in 1861 but it was instead adopted as a battle flag by the Army of Northern Virginia under General Lee. Despite never having historically represented the USA as a country nor officially recognized as one of the national flags, the USA CONFEDERATE  flag is commonly referred to as "the Confederate Flag" and has become a widely recognized symbol of the South. The USA CONFEDERATE FLAG is also known as the REBEL, DIXIE, or SOUTHERN CROSS and is often incorrectly referred to as the "Stars and Bars". The actual "Stars and Bars" is the first national flag, which used an entirely different design). Some groups such as the Ku Klux Klan have flown it and some rockabilly fans hold the battle flag as their emblem. In Australia the Rebels Motorcycle Club was originally named the "Confederates" and their insignia is a Rebel flag with a cap-wearing skull and 1% patch in the centre.Please read about the various types of flag below and then make your selection from the drop down menuFlags come in various types as described below and sizes are commonly referred to in feet rather than metresDecorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and dryingNote this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m)Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flagsPatches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks.

  • CONFEDERATE FLAG WITH CHARGER

    This US import Dixie Novelty Car Plate measures 12in x 6in or 30cm x 15cm. We carry only the highest quality License Plates and Signs that are manufactured. Some are lightly embossed and some are flat products and all these fun and unique designs are sure to generate lots of fun conversation! Made from lightweight aluminium for durability and can be put anywhere even outside. Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements

  • Confederate Flag – with Bald Eagle Head

    This US import Dixie Novelty Number Plates measures 12 x 6in (30 x 15cm) and is a lightly embossed productWe carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements.

  • CONFEDERATE FLAG

    This CONFEDERATE FLAG Novelty Number Plate measures 12 x 6in (30 x 15cm) and is normally supplied as a non-embossed flat product, but from time to time we do have stocks of a lightly embossed version We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar  rec room  games room or where ever you want to hang them. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements.

  • SAVE YO CONFEDERATE MONEY BOYS

    This Dixie Novelty Car Plate is made in the USA from high quality aluminium and is very durable and long lasting and may be placed and used outside. Yes aluminium signs are a wee bit more expensive than some of their non-metal counterparts but they make up for it in durability quality and appearance. Each is pre-drilled top and bottom so ready to hang. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition

  • CONFEDERATE (REBEL) WITH MOTORBIKE

    CONFEDERATE (REBEL) FLAG WITH MOTORBIKE Size: 5ft x 3ft – 1.5m x0.9m. Made of polyester which has limited outdoor use as sun and wind would affect the material. These flags are lightweight flags and have a variety of uses such as sports team support; decoration; marches; occasional flying on a flagpole but we emphasise these flags are not designed for prolonged flying on flagpoles. The hoist edge is finished with 2 eyelets.