NEW SOUTH WALES

NEW SOUTH WALES
Clear
SKU: FL0090 Categories: ,

The NEW SOUTH WALES FLAG was was officially adopted by the government of New South Wales in 1876. The flag is based on the defaced British Blue Ensign with the state badge located in the fly. The badge, based on the coat of arms, is a white disc with the cross of St George, a golden lion passant guardant in the centre of the cross and an eight-pointed gold star on each arm of the cross. This flag was adopted due to criticisms from the British Admiralty that the previous design was too similar to the design of the Victorian flag.

Please read about the various types of flag below and then make your selection from the drop down menu

Flags come in various types as described below and sizes are commonly referred to in feet rather than metres

Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)

Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying

Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.

Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)

Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.

Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m)

Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)

Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags

Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

Additional information

Flag Size

, , , , ,

Reviews

There are no reviews yet.

Be the first to review “NEW SOUTH WALES”

You may also like…

  • ACT 4 EVER

    The ACT 4 EVER novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. Aussie states available in this series are ACT 4 EVER; NSW 4 EVER; NT 4 EVER; QLD 4 EVER; SA 4 EVER; TAS 4 EVER; VIC 4 EVER; WA 4 EVER - see website links below These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • SOUTH AUSTRALIA

    The SOUTH AUSTRALIA STATE FLAG was officially adopted by the government of South Australia State in 1904. It's a British Blue Ensign defaced with the state badge located in the fly. The badge is a gold disc featuring a Piping Shrike with its wings outstretched. The badge is believed to have been originally designed by Robert Craig, a teacher at the School of Arts in Adelaide, and officially gazetted on 14 January 1904 Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (55 or 60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • QUEENSLAND STATE

    The QUEENSLAND STATE FLAG is a British Blue Ensign defaced with the state badge on a white disc. The badge is a light blue Maltese Cross with an imperial crown in the centre. The flag dates from 1876, with minor alteration occurring, the last being in 1901 with the death of Queen Victoria.Please read about the various types of flag below and then make your selection from the drop down menuFlags come in various types as described below and sizes are commonly referred to in feet rather than metresDecorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and dryingNote this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m)Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flagsPatches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks