HUMBER HAWKS

$25.10

Classic BritishB Style

SKU: N/A Categories: ,

Description

The HUMBER HAWKSB novelty plate features the British Classic, the The Humber Hawk four-cylinder automobile manufactured from 1945 to 1967 by British-based Humber Limited.
There were 4 generations and our thanks to Wikipedia for the following information

1st Humber Hawk Mk I & II – a re-badged Hillman 14 (1938-1940) was the first Humber car to be launched after World War II. Slightly longer because of the new boot lid superimposed on its fastback tail and narrower having shed its running boards it also managed to be 51kg lighter than the prewar car. The Mark II version of September 1947 was not even a facelift, the main difference being a column gear change with a control ring fitted to the gearbox making it impossible to crash the syncromesh gears. Top speed was around 65 mph (105 km/h).

2nd Humber Hawk Mark III to V The Mark III Hawk was a completely new car and was first shown at the London Motor Show in October 1948, but it still retained the earlier engine (side-valves, 1944 cc, 56 bhp at 3800 rpm) and transmission albeit with new rubber mountings. The new body was styled by the Loewy Studio and the separate headlights of the old model were gone, along with the separate front wings. The chassis was new, with coil-sprung independent front suspension replacing the previous transverse leaf spring. The body was now an integral component of the car’s structure. The rear axle was also a new design with hypoid gearing. The body could be finished in a wide range of colours, both as two-tone and metallic. The metallic finishes would be offered on all the Hawks until the model’s demise in late 1967/early 1968.
In 1951 the Mark IV version arrived with a larger, 2267 cc engine incorporating, as before, an aluminium cylinder head and with a 58 instead of 56 bhp output. However at mid range speeds around 15 percent more power was generated. The Mark IV also used larger, 15-inch wheels. The steering was now more highly geared and was commended by commentators for its lightness when manoeuvering the car in a confined space despite 53% of the car’s 2996 pounds (1358 kg) being carried by the front wheels.

3rd Humber Hawk Mark VI and VIA The main change with the Mk VI, which was introduced in June 1954, was the fitting of an overhead-valve cylinder head to the engine. The rear of the body was slightly changed, which made the car longer. In 1955 an estate version with fold-down tailgate appeared. The April 1956 Mk VIA was a fairly minor upgrade, with changes mainly to the interior. A de-luxe version was added to the range. A replacement, slightly more powerful and with an entirely new body was announced in May 1957. Mark VI registered 6 August 1954, and the motoring correspondent of The Times claimed that any previous Hawk owner would be “astonished” by the Mark VI’s 20 per cent more powerful engine’s ability to effortlessly swing the car along at 70 mph. Cold starting was very good. The engine was not always so willing to start when cold. The tyres were inclined to squeal on not very sharp corners taken at any more than a modest speed.The brake lining area is now 40 per cent more than on the Mark V. The driver’s windscreen wiper is badly located.

4th Humber Hawk Series I to IVA
The new Hawk announced in May 1957 had a completely new body with unitary construction which it would go on to share with the 1958 Humber Super Snipe. This was the biggest bodyshell for a saloon/estate car built in Great Britain at the time. The 2267 cc engine was carried over, though with modifications to the distributor mounting, and other details; and an automatic transmission, the Borg Warner D.G. model, was now available. The body was styled in Rootes’ own studios and featured more glass than previous models, with wrap-around front windscreen, which gave it a considerable resemblance to a base model 1955 Chevrolet 4-door sedan. The missing rear quarter-lights were returned in series IV. The estate version featured a horizontally split tailgatebthe lower half opening downwards (to provide an extra length of luggage-platform if necessary) and the upper half upwards. The fuel-filler cap was concealed behind the offside rear reflector. There were several revisions during the car’s life, each resulting in a new Series number.

In March 1967 Rootes announced that production of the Humber Hawk, along with that of the Super Snipe and Imperial had ceased. The announcement stated that the cars’ place in their range would be filled by Chrysler Valiants imported from Australia, although there is no evidence of the UK car market having been flooded by Valiants following the announcement.

After Hawk production ended, Rootes came to concentrate on sectors offering greater volume, no longer featuring as a UK provider of large family cars. It had, in particular, been unusual for UK manufactured cars of this size to feature a spacious station wagon / estate car version; and, following the demise of the Humber Hawk, the UK market for large estate cars quickly came to be dominated by the Volvo 145, introduced to the UK in March 1968, and its successors.

This plate has no embossed characters but has a pressed out embossed borderB and is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you.B Virtually anything you want can be created with our modern digital equipment.B The key is good art, and we can do

ANY GRAPHIC! B B ANY DESIGN! B B ANY COLOUR!

Important note about images we provide : Just as we sometimes see that bpricing is subject to change without noticeb, so too are bdesigns subject to change without noticeb. In 99.99% of cases, what you see on Dixiebs website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesnbt always trickle down until the new designs are manufactured and shipped to Dixie.B We hope this is helpful and understandable.

Additional information

Weight 0.15 kg
Product Type

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…