FORD XE FAIRMONT GHIA

FORD XE FAIRMONT GHIA
Clear

The FORD XE FAIRMONT GHIA  novelty plate shows the car that was produced by Ford Australia from 1982 to 1984. It was the second iteration of the fourth generation of this Australian-made model and also included the Ford Fairmont (XE)—the luxury-oriented version of the Falcon.
The XE range consisted of nine models marketed as follows: Falcon utility / Falcon van / Falcon GL ute / Falcon GL van / Falcon GL sedan / Falcon GL wagon / Fairmont sedan / Fairmont wagon & Fairmont Ghia sedan

This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a plate to your design please click here

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Additional information

Product Type

,

Reviews

There are no reviews yet.

Be the first to review “FORD XE FAIRMONT GHIA”

You may also like…

  • Ford XY GTHO Phase III

    Our Ford XY GTHO Phase III is of course the iconic Ford and the Phase III GTHO was Australia's fastest four-door production car. The name of the car is often abbreviated to GTHO Phase III or even just Phase 3. Sometimes it is even referred to as a Hoey. It was also known as the Shaker because of the air intake scoop that protruded out of the bonnet and shook with the motion of the engine.And rattler because of the sound of the solid motor. The modified version the Falcon GT built in 1971 with a heavily upgraded engine, a 4 speed top-loader gearbox and Detroit locker 9" differential. It was also equipped with special brakes and handling package, plus a 164 litre fuel tank. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." by Sports Car World. Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 seconds The Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra. A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GTHO 351

    The GTHO 351 novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car.Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 secondsThe Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra.A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that's been producing and selling quality number plates for years.  The GTHO 351 sign can be hung inside or outside and each is pre-drilled so ready to hang.We sell for a great price and offer a wide variety so get yours today!BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

  • FORD FALCON XL SEDAN & UTE

    FORD FALCON XL SEDAN & UTE This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DESIGN YOUR OWN AUSSIE SIZE PLATE

    DESIGN YOUR OWN AUSSIE SIZE PLATE and have a unique product in store that none of your competitors has, as our plates lend themselves very well to the ‘custom’ side of things. You could promote your region/town to tourists; provide a souvenir of a tourist attraction; promote your business; or promote your car club or rally with our customised items. Each sign is top quality aluminium a little under 1 mm thick, with a lovely gloss finish, that only our high quality dye sublimation process and photo quality digital printing methods will give, so if you would like plates made to your design, we can easily do this for you. Virtually anything you want can be created with our digital equipment.  The Key is Good Art! ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! This type of plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, or a pressed out embossed border and characters, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Send us your own artwork, logo or design – first our US based supplier creates the artwork for you, then once you have signed off that it is correct, production time for most orders can be completed and the items ready to ship within a few days. • The minimum production run is 1 plate, but for orders less than 12 items, a $5 per item surcharge applies PLUS art set up fees as below will apply • For production runs of 24 or more signs/plates, the cost per sign/plate is the same as our wholesale price on stocked plates • 50% deposit upfront, with balance on or before day of shipping • There is a manufacturing set up fee of just $20 if you supply us with everything ‘artwork ready’ to go straight to print on the plate. • If we need to create the artwork for you (and we will of course show you a proof) there is an artwork fee of $55 which includes the set up fee. • Art ready means at least 250 dpi and the correct proportions for the sign you require - eg, for an Aussie size plate the art needs to be approx. 10cm wide x 4 cm high • First our US based manufacturer creates the artwork, then once you have signed off that it is correct, production commences • For most orders production is completed and the items ready to ship within a few days. • If required we can number or letter a set of plates with sequential letters and numbering – there is a surcharge of $1.80 per plate for this. SHIPPING: If you want your items shipped from the USA immediately we will charge you the full shipping costs (approx $90 per 9kg carton), BUT if you can wait until we have our regular monthly shipment coming in, then we will charge you 50% of that from USA to Australia, plus the usual courier charges from Dixie HQ to your store (approx $25 per 5kg satchel). For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We look forward to assisting you DESIGN YOUR OWN AUSSIE SIZE PLATE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FALCON XB GT 351

    FORD FALCON XB GT 351 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.