CAPRI

CAPRI
SKU: ANG0025 Categories: ,

The CAPRI novelty plate relates to a wonderful car; the Ford Capri. There were a few models – Ford Consul Capri coupé was produced by Ford of Britain between 1961 and 1964. The Ford Capri coupé was produced by Ford of Europe from 1969 to 1986. The Ford/Mercury Capri convertible was produced by the Ford Motor Company of Australia from 1989 to 1994.

The Capri name was also used by Ford’s Lincoln-Mercury Division on six different models which did not bear the Ford name. The Lincoln Cosmopolitan Capri from 1950 to 1951; the Lincoln Capri from 1952 to 1959; the Mercury Comet Capri in 1966–1967; and three different generations of Mercury Capris from 1970 to 1994.

It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The CAPRI sign can be hung inside or outside and each is pre-drilled so ready to hang.

We sell for a great price and offer a wide variety so get yours today!
BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

Reviews

There are no reviews yet.

Be the first to review “CAPRI”

You may also like…

  • FORD Customline Twin Spinner

    The FORD Customline Twin Spinner is an automobile that was produced by Ford in the United States for model years 1952 to 1956.  The Ford Customline was introduced in 1952 as the mid-range model in that year’s US Ford range, positioned below the Ford Crestline and above the Ford Mainline. It was offered in 2-door sedan, 4-door sedan, 2-door coupé & 4-door station wagon body styles. The coupe was marketed as the Club Coupe and the station wagon as the Customline Country Sedan. 1952 Customlines were available with 215 cid inline six-cylinder or 239 cid V8 engines. Production totaled 402,542 units. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD XY FALCON PANEL VAN

    The FORD XY FALCON PANEL VAN is part of the The Ford Falcon XY range that was produced by Ford in Australia from 1970 to 1972. It was the fourth and last iteration of the second generation of this Australian-made model and also included the Ford Fairmont (XY)—the luxury-oriented version of the Falcon. The XY Falcon was released in October 1970 replacing the XW Falcon. The XY was a facelift of the XW, featuring a new divided grille and redesigned tail lights. Improvements were made to seating, safety equipment and ride quality. The XY Falcon range featured eight passenger vehicles and three commercial models: Ford Falcon Sedan; Ford Falcon Wagon; Ford Falcon 500 Sedan; Ford Falcon 500 Wagon; Ford Futura Sedan; Ford Fairmont Sedan; Ford Fairmont Wagon; Ford Falcon GT Sedan; Ford Falcon Utility; Ford Falcon Van and Ford Falcon 500 Utility Futura and Fairmont models, whilst marketed as part of the XY Falcon range, were not officially referred to or badged as Falcons. A GS Rally Pack was available as an option on Falcon 500, Futura and Fairmont Sedans and Wagons. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Ford Mustang II Mach 1

    Our long-in-the-making Australian Classic Ford range is now here to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993).Aussie plates are extremely high quality Australian manufactured Standard Size Number Plate (37cm x 13cm). Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle, and have embossed characters and an embossed border