CAMBODIA

Description

The flag of CAMBODIA in its present form was originally adopted in 1948 and readopted in 1993, after the Constituent Assembly election in 1993 and restoration of the monarchy.

Since around 1850, the Cambodian flag has featured a depiction of Angkor Wat in the centre. The current flag, with a blue border and red central (the stripes are in the ratio 1:2:1) was adopted following Cambodia’s independence in 1948. It was used until 9 October 1970, when a new flag was introduced for Lon Nol’s Khmer Republic that lasted until the takeover of the Khmer Rouge in 1975. The subsequent state of Democratic Kampuchea, which existed from 1975 to 1979, used a red flag with a three-towered Angkor Wat design retained in yellow beginning in 1976. The People’s Republic of Kampuchea was established in 1979, after the Vietnamese invasion of Cambodia.

The Kampuchean National United Front for National Salvation (FUNSK) revived the flag adopted by the Khmer Issarak in the days of anti-French resistance for the new state. This flag had the same colour pattern as the DK flag, but with a yellow five-towered Angkor Wat silhouette. When the PRK renamed itself as “State of Cambodia” (SOC) in 1989, the flag’s lower half became blue. The UNTAC flag was used during the 1992b1993 transitional period along with the flag of the SOC within Cambodia.

In 1993, the 1948 Cambodian flag was readopted. The current Cambodian flag, together with the flag of Afghanistan, hold the distinction of being the only two state flags to feature a building. Red and blue are traditional colours of Cambodia.

The flag used today is the same as that established in 1948, although the older flag is sometimes said to have used a red outline for Angkor Wat while the current flag uses black specifically. Since that time, five other intervening designs have been used. Almost all made use of the image of the temple of Angkor Wat in one form or another. This famous temple site, which dates from the 12th century, was built by the Mahidharapura monarchs. It has five towers, but these were not always all depicted in the stylised version used on flags. The monarchy was restored in September 1993, the 1948 flag having been readopted in June of that year.

Flags come in various types as described below and sizes are commonly referred to in feet rather than metres, so please read about the various types of flag below and then make your selection from the drop down menu

Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall dC)cor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm)

Outdoor Flagpole Flags: These are a btrilobalb material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying

Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use.

Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the polebs cords. The most common sizes in outdoor flags is 6x3ft (180x90cm)

Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. Itbs a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side.

Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m)

Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price)

Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags which are available HERE

Patches: These measure 3.5bx2.25b (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks