CAMARO SS

CAMARO SS
Clear

The CAMARO SS novelty plate shows the first generation Chevrolet Camaro that appeared in Chevrolet dealerships in September 1966, for the 1967 model year on a brand-new rear-wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no “B” or center pillar) or convertible with a choice of six-cylinder and V8 power plants. The first-generation Camaro was built through the 1969 model year.

The Camaro’s standard drive train was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) or a 327 cu in (5.4 L) (307 cu in (5.0 L) later in 1969) V8 engine, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed “Powerglide” automatic transmission was available all three years. The three-speed “Turbo Hydra-Matic 350” automatic became available starting in 1969. The optional automatic for SS396 cars was the Turbo 400 three-speed automatic.

There was a plethora of other options available all three years, including three main packages:
The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model.

The SS performance package consisted of a 350 or 396 cu in V8 engine and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging.

The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am series. It included a solid-lifter 302 V8, 4-speed transmission, power disc brakes, and two wide stripes down the hood and trunk lid.

This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu.

These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.

Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here

For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition

If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do

ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR!

For more details on creating a plate to your design please click here

Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

Additional information

Product Type

,

Reviews

There are no reviews yet.

Be the first to review “CAMARO SS”

You may also like…

  • WE USE GENUINE CHEVROLET PARTS

    Our WE USE GENUINE CHEVROLET PARTS is all about Chevrolet , colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929. This circular sign comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. Circular Signs are 30cm (12 ins) diameter with mounting holes, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition This is a GM Licensed product used under licence 49X95.  GM Hologram code 99A0104 If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CORVETTE CROSSED FLAGS

    The CORVETTE CROSSED FLAGS - when Chevrolet was preparing their new Corvette sports car in the early '50s, the task of designing the logo fell to Chevy interior designer Robert Bartholomew. Bartholomew's design featured two crossed flags: One, the checkered flag that symbolized race victory, the other, the American Stars 'n Stripes. However, using the American flag to promote commercial products was illegal at the time, and Chevy execs reportedly decided at the last minute to nix that part of the design. Bartholomew's last-minute replacement was a flag sporting both the Chevrolet logo and a fleur-de-lis, a French symbol that was reportedly part of Louis Chevrolet's family crest. New badges were whipped up based on Bartholomew's drawings, and the Corvette debuted in 1953 at New York's Waldorf-Astoria hotel. There are two types of this plate (a) with the 1960's flag logo GM Trademarks used under license to 49X95 - GM barcode 99L0971 (b) with the 2005 flag logo MC50152 GM Trademarks used under license to 49X95 - GM barcode 99L1166 See below for various flag logo years and types types. CORVETTE CROSSED FLAGS plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition From Chroma - Plasticolor. Official Licenced GM Trademarks - GM barcode 045929019900 If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEVROLET CHEVELLE SUPER SPORT SS 1967 COLLAGE

    The impressive and collectable CHEVROLET CHEVELLE SUPER SPORT SS 1967 COLLAGE Sign shows lovely interior and exterior images of a Blue 1967 Chevelle SS with the 427 Turbojet logo at the bottom right. The Chevelle Super Sport, or SS represented Chevrolet's entry into the muscle car battle. The 1967 models received a facelift. Large wraparound tail lamps went into a new rear end with standard backup lights. "What you'll see inside," claimed the sales brochure for the 1967 Chevelle, "will probably bring on a severe compulsion to go driving." Front disc brakes were available on all models, and a new dual master cylinder brake system incorporated a warning light. Chevrolet also added 14" wheels and a three speed automatic transmission to their line of transmissions. New safety equipment became standard, including a collapsible steering column.  The SS396 continued as its own series with both sport coupe and convertible body styles. The 375-horsepower 396-cubic-inch V8 was dropped from the options list until late in the model year and returned with 612 being sold. Seven transmissions were available: two manual three-speeds, two manual four-speeds, an overdrive three-speed, and two automatics. The manual-shift feature of the Turbo Hydra-Matic transmission was featured. Options included Superlift air shock absorbers, Strato-ease headrests, and special instrumentation Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by General Motors under licensing to Sign Of The Times UPC not yet provided. Images by DavidGPhotography BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DESIGN YOUR OWN AUSSIE SIZE PLATE

    DESIGN YOUR OWN AUSSIE SIZE PLATE and have a unique product in store that none of your competitors has, as our plates lend themselves very well to the ‘custom’ side of things. You could promote your region/town to tourists; provide a souvenir of a tourist attraction; promote your business; or promote your car club or rally with our customised items. Each sign is top quality aluminium a little under 1 mm thick, with a lovely gloss finish, that only our high quality dye sublimation process and photo quality digital printing methods will give, so if you would like plates made to your design, we can easily do this for you. Virtually anything you want can be created with our digital equipment.  The Key is Good Art! ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! This type of plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, or a pressed out embossed border and characters, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Send us your own artwork, logo or design – first our US based supplier creates the artwork for you, then once you have signed off that it is correct, production time for most orders can be completed and the items ready to ship within a few days. • The minimum production run is 1 plate, but for orders less than 12 items, a $5 per item surcharge applies PLUS art set up fees as below will apply • For production runs of 24 or more signs/plates, the cost per sign/plate is the same as our wholesale price on stocked plates • 50% deposit upfront, with balance on or before day of shipping • There is a manufacturing set up fee of just $20 if you supply us with everything ‘artwork ready’ to go straight to print on the plate. • If we need to create the artwork for you (and we will of course show you a proof) there is an artwork fee of $55 which includes the set up fee. • Art ready means at least 250 dpi and the correct proportions for the sign you require - eg, for an Aussie size plate the art needs to be approx. 10cm wide x 4 cm high • First our US based manufacturer creates the artwork, then once you have signed off that it is correct, production commences • For most orders production is completed and the items ready to ship within a few days. • If required we can number or letter a set of plates with sequential letters and numbering – there is a surcharge of $1.80 per plate for this. SHIPPING: If you want your items shipped from the USA immediately we will charge you the full shipping costs (approx $90 per 9kg carton), BUT if you can wait until we have our regular monthly shipment coming in, then we will charge you 50% of that from USA to Australia, plus the usual courier charges from Dixie HQ to your store (approx $25 per 5kg satchel). For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We look forward to assisting you DESIGN YOUR OWN AUSSIE SIZE PLATE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.