AMERICAS BUNTING

AMERICAS BUNTING
SKU: BUNT3 Category:

Our AMERICAS BUNTING set has a representative selection of 20 of the fifty plus Americas countries. We feature only a selection of the Americas, as to have them all on one bunting would get too long and too expensive. We have 50 plus of the Americas Nations in stock as hand wavers, so if wanted, we can supply the hand waver size flag and customers can add to the bunting.

The AMERICAS BUNTING set comprises 20 small polyester flags sewn onto white tape. Each flag is 18”x12” (45x30cm), with an 8” (20cm) space between each flag, and 24” (60cm) either end for tie up. Total length of length of the white line is approximately 37 feet (12m).

The countries featured on this AMERICAS BUNTING are: Antigua/Barbuda; Argentina; Barbados; Belize; Bolivia; Brazil; Canada; Chile; Colombia; Costa Rica; Ecuador; Guyana; Hondurs; Panama; Paraguay; St. Kitts; St. Vincent; USA; Uraguay; Venezuela

Great for adding atmosphere and perfect for Americas themed events, parties, churches and schools

The Americas are also known as the New World, comprising the combined continental landmasses of North America and South America, along with their associated islands. They cover 8.3% of the Earth’s total surface area (28.4% of its land area). The topography is dominated by the American Cordillera, a long chain of mountains that run the length of the west coast. The flatter eastern side of the Americas is dominated by large river basins, such as the Amazon, Mississippi, and La Plata. Since the Americas extend 14,000 km (8,700 mi) from north to south, the climate and ecology vary widely, from the arctic tundra of Northern Canada, Greenland, and Alaska, to the tropical rain forests in Central America and South America.

Reviews

There are no reviews yet.

Be the first to review “AMERICAS BUNTING”

You may also like…

  • HONDURAS

    Decorative Flags have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles sports team support decoration marches and occasional flying on an outdoor flagpole but we emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material. For use on outdoor flagpoles we have heavier trilobal material flags

  • CONFEDERATE FLAG

    CONFEDERATE FLAG novelty number plate comes standard as  flat non - embossed  and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHILE

    Size: 5ft x 3ft – 1.5m x0.9m with 2 grommets on LHS Sleeve. Printed on 75 Denier Polyester*Other sizes and pricing available upon application

  • COSTA RICA

    The COSTA RICA FLAG is available only in one size 3x2ft (90x60cm) Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • USA CONFEDERATE REBEL

    The USA CONFEDERATE FLAG is well known internationally. However, it has a checkered/controversial history and was rejected as the US national flag in 1861 but it was instead adopted as a battle flag by the Army of Northern Virginia under General Lee. Despite never having historically represented the USA as a country nor officially recognized as one of the national flags, the USA CONFEDERATE  flag is commonly referred to as "the Confederate Flag" and has become a widely recognized symbol of the South. The USA CONFEDERATE FLAG is also known as the REBEL, DIXIE, or SOUTHERN CROSS and is often incorrectly referred to as the "Stars and Bars". The actual "Stars and Bars" is the first national flag, which used an entirely different design). Some groups such as the Ku Klux Klan have flown it and some rockabilly fans hold the battle flag as their emblem. In Australia the Rebels Motorcycle Club was originally named the "Confederates" and their insignia is a Rebel flag with a cap-wearing skull and 1% patch in the centre. Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying. Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45x0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11" (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25x5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks .