SHOP HERE

  • HUMBER HAWKS

    The HUMBER HAWKS novelty plate features the British Classic, the The Humber Hawk four-cylinder automobile manufactured from 1945 to 1967 by British-based Humber Limited. There were 4 generations and our thanks to Wikipedia for the following information 1st Humber Hawk Mk I & II - a re-badged Hillman 14 (1938-1940) was the first Humber car to be launched after World War II. Slightly longer because of the new boot lid superimposed on its fastback tail and narrower having shed its running boards it also managed to be 51kg lighter than the prewar car. The Mark II version of September 1947 was not even a facelift, the main difference being a column gear change with a control ring fitted to the gearbox making it impossible to crash the syncromesh gears. Top speed was around 65 mph (105 km/h). 2nd Humber Hawk Mark III to V The Mark III Hawk was a completely new car and was first shown at the London Motor Show in October 1948, but it still retained the earlier engine (side-valves, 1944 cc, 56 bhp at 3800 rpm) and transmission albeit with new rubber mountings. The new body was styled by the Loewy Studio and the separate headlights of the old model were gone, along with the separate front wings. The chassis was new, with coil-sprung independent front suspension replacing the previous transverse leaf spring. The body was now an integral component of the car's structure. The rear axle was also a new design with hypoid gearing. The body could be finished in a wide range of colours, both as two-tone and metallic. The metallic finishes would be offered on all the Hawks until the model's demise in late 1967/early 1968. In 1951 the Mark IV version arrived with a larger, 2267 cc engine incorporating, as before, an aluminium cylinder head and with a 58 instead of 56 bhp output. However at mid range speeds around 15 percent more power was generated. The Mark IV also used larger, 15-inch wheels. The steering was now more highly geared and was commended by commentators for its lightness when manoeuvering the car in a confined space despite 53% of the car's 2996 pounds (1358 kg) being carried by the front wheels. 3rd Humber Hawk Mark VI and VIA The main change with the Mk VI, which was introduced in June 1954, was the fitting of an overhead-valve cylinder head to the engine. The rear of the body was slightly changed, which made the car longer. In 1955 an estate version with fold-down tailgate appeared. The April 1956 Mk VIA was a fairly minor upgrade, with changes mainly to the interior. A de-luxe version was added to the range. A replacement, slightly more powerful and with an entirely new body was announced in May 1957. Mark VI registered 6 August 1954, and the motoring correspondent of The Times claimed that any previous Hawk owner would be "astonished" by the Mark VI's 20 per cent more powerful engine's ability to effortlessly swing the car along at 70 mph. Cold starting was very good. The engine was not always so willing to start when cold. The tyres were inclined to squeal on not very sharp corners taken at any more than a modest speed.The brake lining area is now 40 per cent more than on the Mark V. The driver's windscreen wiper is badly located. 4th Humber Hawk Series I to IVA The new Hawk announced in May 1957 had a completely new body with unitary construction which it would go on to share with the 1958 Humber Super Snipe. This was the biggest bodyshell for a saloon/estate car built in Great Britain at the time. The 2267 cc engine was carried over, though with modifications to the distributor mounting, and other details; and an automatic transmission, the Borg Warner D.G. model, was now available. The body was styled in Rootes' own studios and featured more glass than previous models, with wrap-around front windscreen, which gave it a considerable resemblance to a base model 1955 Chevrolet 4-door sedan. The missing rear quarter-lights were returned in series IV. The estate version featured a horizontally split tailgate—the lower half opening downwards (to provide an extra length of luggage-platform if necessary) and the upper half upwards. The fuel-filler cap was concealed behind the offside rear reflector. There were several revisions during the car's life, each resulting in a new Series number. In March 1967 Rootes announced that production of the Humber Hawk, along with that of the Super Snipe and Imperial had ceased. The announcement stated that the cars' place in their range would be filled by Chrysler Valiants imported from Australia, although there is no evidence of the UK car market having been flooded by Valiants following the announcement. After Hawk production ended, Rootes came to concentrate on sectors offering greater volume, no longer featuring as a UK provider of large family cars. It had, in particular, been unusual for UK manufactured cars of this size to feature a spacious station wagon / estate car version; and, following the demise of the Humber Hawk, the UK market for large estate cars quickly came to be dominated by the Volvo 145, introduced to the UK in March 1968, and its successors. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DATSUN 240Z x THREE

    The DATSUN 240Z x THREE novelty plate features the Datsun 240Z which according to Wikipedia was also called the Nissan S30 which was the first generation of Z GT two-seat coupe, produced by Nissan Motors of Japan from 1969 to 1978. Prior to the 240Z Nissan Motors had built the extremely popular Fairlady Roadsters, and exported 44,152 of them almost exclusively to the U.S.A. It arrived in Australia in March of 1970 but from 1969-1973 production of the 240Z never kept up with demand, and only 2,400 were imported into Aussie. The sports cars of the 1970s were all sexy wings and aero wedges with jaw-dropping designs that stand the test of time today and the stunning 240Z's flowing lines borrowed just enough from the great European sports cars of the 1960s to make this car a classic itself. The look was so successful that the company kept updating and tweaking the design through the '70s and into the early 1980s. The Sports car International magazine rated the 1970s top sports cars as follows: 1. Ferrari Daytona 2. Datsun 240Z 3. Lamborghini Countach 4. Lamborghini Miura SV 5. Ferrari 308 6. Ferrari Dino 7. Mazda RX-7 8. Porsche Carrera RS 9. De Tomaso Pantera 10. BMW M1 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MG Y TYPES

    The MG Y TYPES novelty plate features the MG Y-Type - a small saloon and limited production open four-seat tourer that was built by MG between 1947 and 1953. When production ceased, 8,336 "Y" Types had been produced, 6,131 of which were "YA"s, 904 were "YT" Tourers and 1,301 were "YB"s. Wikipedia tells us: In the years immediately before the Second World War, MG had sought to supplement its popular range of ‘Midget’ sports cars with three saloons of various sizes and engine capacities. These were the "S", "V" and "W" models. The MG factory at Abingdon on Thames had grown by developing what were in essence Morris based products and they were always to be closely associated with what was to become the Nuffield Organisation (Morris, Wolseley and later Riley). The "WA" had an engine displacement of 2,561 cc, the "SA" 2,288 cc and the smallest of the group, the "VA", had an engine of 1,548 cc. The next development to the range was to include one more saloon, of smaller engine capacity than the "VA", and for a component base the Cowley design office turned to Morris’s Ten-Four Series M saloon, which was introduced during 1938, and the smaller Eight Series E which was launched at the Earls Court Motor show the same year. The prototype "Y" Type was constructed in 1939 with an intended launch at the Earls Court Motor show, the following year. However, as a result of the hostilities the public had to wait a further eight years before production commenced. All prototypes originating from the MG Factory at Abingdon were allocated numbers prefixed by the letters EX; this practice continued until the mid-fifties. Although the prototype of the MG "Y" Type was primarily a Morris concept from Cowley, much of the ‘fleshing out’ was completed at Abingdon. As a result it was allocated the prototype number EX.166. When the car was launched the MG Sales Literature stated "A brilliant new Member of the famous MG breed. This new One and a Quarter Litre car perpetuates the outstanding characteristics of its successful predecessors – virile acceleration, remarkable ‘road manner,’ instant response to controls, and superb braking. A ‘lively’ car, the new One and a Quarter Litre provides higher standards of performance." The UK price of the car was £525.0.0 ex works plus purchase tax of £146.11.8d. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN TORANAS 50 YEAR

    The HOLDEN TORANAS 50 YEAR novelty plate is in celebration of 50 years of the Holden Torana which falls in 2017. The Torana was a mid-sized car manufactured by Holden from 1967 to 1980, with the name coming from an Aboriginal word meaning "to fly". There were approximately 375,000 Toranas sold. The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden LJ Torana

    The HOLDEN LJ TORANA novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden VN Commodore Sedan

    HOLDEN VN Commodore Sedan  is of course part of the range of cars manufactured since 1978 by Holden in Australia (and, formerly, in New Zealand). For the original model, Holden replaced the long-serving Kingswood and Premier large cars developed in Australia, based on a smaller European design by Opel, re-engineered for Australian conditions. Initially introduced as a single sedan body style, the range expanded in 1979 to include a station wagon. From 1984, Holden began branding the flagship Commodore model as Holden Calais, with the Commodore Berlina introduced in 1984. Long-wheelbase Statesman/Caprice derivatives and Commodore utility body variants followed in 1990. The third generation architecture spawned the most body styles, with a new Holden utility launched in 2000 (now officially as the Holden Ute), reborn Monaro coupé in 2001, four-door Holden Crewman utility and all-wheel drive (AWD) Holden Adventra crossover in 2003. Holden Special Vehicles (HSV) in 1987 began official modification of high performance variants of the Commodore and its derivatives, under its own nameplate. Rivalry came predominantly from the Ford Falcon—also locally built. First generation VB (1978–1980) VC (1980–1981) VH (1981–1984) VK (1984–1986) VL (1986–1988) Second generation VN (1988–1991) VP (1991–1993) VR (1993–1995) VS (1995–1997) Third generation VT (1997–2000) VX (2000–2002) VY (2002–2004) VZ (2004–2006) Fourth generation VE (2006–2013) VF (2013–present) This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden VS Commodore Ute

    HOLDEN VS Commodore Ute  is of course one f the range of cars manufactured since 1978 by Holden in Australia (and, formerly, in New Zealand). For the original model, Holden replaced the long-serving Kingswood and Premier large cars developed in Australia, based on a smaller European design by Opel, re-engineered for Australian conditions. Initially introduced as a single sedan body style, the range expanded in 1979 to include a station wagon. From 1984, Holden began branding the flagship Commodore model as Holden Calais, with the Commodore Berlina introduced in 1984. Long-wheelbase Statesman/Caprice derivatives and Commodore utility body variants followed in 1990. The third generation architecture spawned the most body styles, with a new Holden utility launched in 2000 (now officially as the Holden Ute), reborn Monaro coupé in 2001, four-door Holden Crewman utility and all-wheel drive (AWD) Holden Adventra crossover in 2003. Holden Special Vehicles (HSV) in 1987 began official modification of high performance variants of the Commodore and its derivatives, under its own nameplate. Rivalry came predominantly from the Ford Falcon—also locally built. First generation VB (1978–1980) VC (1980–1981) VH (1981–1984) VK (1984–1986) VL (1986–1988) Second generation VN (1988–1991) VP (1991–1993) VR (1993–1995) VS (1995–1997) Third generation VT (1997–2000) VX (2000–2002) VY (2002–2004) VZ (2004–2006) Fourth generation VE (2006–2013) VF (2013–present) This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden WB One Tonner & Panel Van

    The Holden Holden WB One Tonner & Panel Van novelty plate is all about The Holden WB series of automobiles produced by Holden in Australia from 1980 to 1984. It is a facelifted version of the Holden HZ series, which it replaced. Unlike the HZ and every other full size Holden series before it, the Holden WB was only offered in commercial vehicle body styles with no sedan or wagon passenger car variants. The long-wheelbase WB series models were marketed under the separate Statesman marque, absent of all Holden branding. The WB was released in April 1980, the range consisting of two coupe utility models, a panel van and a cab chassis truck. The Kingswood panel van, Sandman utility and Sandman panel van models were not carried over from the HZ commercial range. The WB range therefore consisted of: Holden (utility and van) Holden Kingswood (utility) Holden One Tonner (cab chassis) The Kingswood utility featured a black grate style grille and rectangular headlights, unlike the more basic models which shared a divided grille with circular headlights. In August 1980, the base models received an update which gave them the same frontal treatment as the Kingswood utility. Plans to produce sedan and wagon versions of the Holden WB reached an advanced stage but ultimately were not pursued. These variant would have supplemented the new Holden Commodore models in the family car market. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden WB X 3

    The Holden WB X 3 novelty plate is all about The Holden WB series of automobiles produced by Holden in Australia from 1980 to 1984. It is a facelifted version of the Holden HZ series, which it replaced. Unlike the HZ and every other full size Holden series before it, the Holden WB was only offered in commercial vehicle body styles with no sedan or wagon passenger car variants. The long-wheelbase WB series models were marketed under the separate Statesman marque, absent of all Holden branding. The WB was released in April 1980, the range consisting of two coupe utility models, a panel van and a cab chassis truck. The Kingswood panel van, Sandman utility and Sandman panel van models were not carried over from the HZ commercial range. The WB range therefore consisted of: Holden (utility and van) Holden Kingswood (utility) Holden One Tonner (cab chassis) The Kingswood utility featured a black grate style grille and rectangular headlights, unlike the more basic models which shared a divided grille with circular headlights. In August 1980, the base models received an update which gave them the same frontal treatment as the Kingswood utility. Plans to produce sedan and wagon versions of the Holden WB reached an advanced stage but ultimately were not pursued. These variant would have supplemented the new Holden Commodore models in the family car market. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden Gemini x 3

    The HOLDEN GEMINI x 3 novelty plate is all about the The Holden Gemini - a compact car which was produced by Holden and sold in Australasia from 1975 to 1986. It was based on the Japanese Isuzu Gemini, one of the many models based on the GM T-car platform. Voted 'Car of the Year" in 1975 First generation TX (1975–1977) TC (1977–1978) TD (1978–1979) TE (1979–1982) TF (1982–1983) TG (1983–1985) Second generation RB (1985–1986) This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden LC Torana

    The HOLDEN LC TORANA novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden HJ Premier & Kingswood

    The Holden HJ Premier & Kingswood novelty plate is all about the The Holden HJ series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971. All HJ models, aside from the One Tonner, were easily identified from the HQ by having a squared-off frontal treatment with wrap-around indicator lights. The rear of the sedan models featured a new bumper and wraparound triangular taillights, while all other body styles kept the previous HQ's rear styling. Sedan and wagon also had revised rear quarter panels. The mainstream passenger car range consisted of 4-door sedan and 5-door wagon models in three trim levels. Belmont sedan Belmont wagon Kingswood sedan Kingswood wagon Premier sedan Premier wagon This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden HJ Kingswood

    The Holden HJ Kingswood novelty plate is all about the The Holden HJ series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971. All HJ models, aside from the One Tonner, were easily identified from the HQ by having a squared-off frontal treatment with wrap-around indicator lights. The rear of the sedan models featured a new bumper and wraparound triangular taillights, while all other body styles kept the previous HQ's rear styling. Sedan and wagon also had revised rear quarter panels. The mainstream passenger car range consisted of 4-door sedan and 5-door wagon models in three trim levels. Belmont sedan Belmont wagon Kingswood sedan Kingswood wagon Premier sedan Premier wagon This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Holden LH Torana SLR x 2

    The Holden LH Torana SLR x 2 novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN LX Torana Sunbird

    The HOLDEN LX Torana Sunbird novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN UC Torana Blue

    The HOLDEN UC TORANA BLUE novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN LH Torana SLR5000

    The HOLDEN LH TORANA SLR5000 novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HB TORANA

    The HOLDEN HB TORANA novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HB BRABHAM TORANA

    The HOLDEN HB BRABHAM TORANA novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN LH TORANA G PACK

    The HOLDEN LH TORANA G PACK novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN TA TORANA

    The HOLDEN TA TORANA novelty plate is all about the The Holden Torana - a mid-sized car manufactured by Holden from 1967 to 1980. The name comes from an Aboriginal word meaning "to fly". The first Torana (HB series) was released in 1967 and was a four-cylinder compact vehicle with origins in the British Vauxhall Vivas of the mid-1960s. Whilst the 1969-73 (LC and LJ series) cars included more popular, longer-wheelbase six-cylinder versions, and with the 1974-77 (LH and LX series) cars adding eight-cylinder versions to the mix, a range of four-cylinder versions continued for the entire production life of the Torana (with later versions being marketed as the Holden Sunbird from November 1976). Changing tack in Australian motor sport, Holden released the LC Torana GTR XU-1 in 1970, with performance-enhanced drive train and handling. From this time through to the release of the Holden Commodore, the Torana remained Holden's most successful sports performance vehicle, with many victories garnered in rallying and circuit racing. The introduction of the VB Commodore in 1978 was preceded by the arrival of the updated UC Torana/Sunbird twins, but with no sports versions or V8 engine options. The Torana was subsequently discontinued in 1979, followed by the four-cylinder Sunbird in 1980. First generation: HB Second generation : LC, LJ, TA Third generation: LH, LX, LX Sunbird, A9X option, UC Torana concept cars: Torana GTR-X; Torana Mystere; Torana TT36 This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN TG GEMINI

    The HOLDEN TG GEMINI novelty plate is all about the The Holden Gemini - a compact car which was produced by Holden and sold in Australasia from 1975 to 1986. It was based on the Japanese Isuzu Gemini, one of the many models based on the GM T-car platform. First generation TX (1975–1977) TC (1977–1978) TD (1978–1979) TE (1979–1982) TF (1982–1983) TG (1983–1985) Second generation RB (1985–1986) This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • INTERCEPTORS

    The INTERCEPTORS novelty plate is all about the specially built pursuit cars or "Interceptors", made famous as iconic muscle cars in the movies This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BEACH WOODY

    Our BEACH WOODY is all about the legendary "woodie" - a car body style with rear bodywork constructed of wood framework with infill wood panels. Originally, wood framework augmented the car's structure, where later models featured applied wood and wood-like elements. Ultimately, manufacturers supplanted wood construction with a variety of materials and methods to recall wood construction — including infill metal panels, metal framework, or simulated wood-grain sheet vinyl, sometimes augmented with three-dimensional, simulated framework. In 2008, wood construction was evoked abstractly on the Ford Flex with a series of side and rear horizontal grooves.  This is a Scott Westmoreland artwork, carrying his signature. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by Scott Westmoreland and used under licensing from Sagebrush Fine Art to Desperate Enterprises UPC 605279111244  ICCD12811 who supply Dixie BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • AUSTRALIA ANIMAL ROAD HAZARD SIGN

    AUSTRALIA ANIMAL ROAD HAZARD SIGN – if you’re going to drive in Australia you’ll need to be aware that Australia has a large number of animals and birds that are big enough to cause a danger on the road! There are 2 versions - one with 5 road signs on it and the other with 6 road signs - please select your preference from the drop down menu This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • EURO SIZE PLATE – PERSONALISED CUSTOM MADE

    A EURO SIZE PLATE - PERSONALISED CUSTOM MADE is a way of personalising your own Aussie Novelty Plate - these embossed plates can be done as "One Offs" or in large numbers and production turnaround is on a weekly cycle. Euro Size plate (52cm x 11cm) without mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 11 characters. If ‘S’ is chosen no more than 16 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate Standard size plates are available in the following background colours: White, Black or Red. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon. There is a Colour chart posted on this website HERE  or there is an icon to click on in the linked products below Euro Size plate (52cm x 11cm) with mounting holes. Coming soon - all other details excatly the same as above In addition to diamonds, dashes, dot/fullstops, we now have even more punctuation options on characters that can be embossed as shown on an attached image. The new characters are: a proper number one with a serif - 1   a hash tag - #   apostrophe – ‘   and symbol - &   at symbol - @ By law we must avoid character combinations that are similar to state issued licenced or personalised registration plates and in general this includes avoiding the following Alpha Numeric combinations:  AAA NN / AA NNN / AAA NNN / NNN AAA / NNN AA  / AA NN AA  / NAAANNN. For bon fide car collectors and exhibitors we can get around this if our customer provides a signed statement of intentional use. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition HOW TO ORDER: First select the number of plates you want to buy, then click the 'Add to Order' button. Then click 'View Order'. Check the plates you want are listed and then click "Add Details and Send" - in this screen there is an "Order Notes" box where you can type in the characters you want on the plate and the colours required, then simply complete your details in the required fields and then hit 'SEND MY ORDER NOW'. You will not be asked for payment until we have ensured we have the details correctly understood If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • A FOOL AND HIS MONEY

    A FOOL AND HIS MONEY ARE SOON PARTYING Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The image design on this sign is courtesy of and copyright by Schonberg Sign Art under licensing to CBH – authorised to, manufactured & distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121267 D120811. BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BARTENDER PHONE RATES

    The BARTENDER PHONE RATES sign would look fabulous in any bar or pub! Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The image design on this sign is copyright  and an official licensed product of SCHONBERG SIGN ART/CBH LICENSING  - under licensing to Desperate Enterprises Inc UPC 605279121458 ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BIG GIRL PANTIES

    BIG GIRL PANTIES Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each BIG GIRL PANTIES is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • BOB MARLEY TRUTH PEACE

    BOB MARLEY TRUTH PEACE - Robert Nesta "Bob" Marley, OM (6 February 1945 – 11 May 1981) was a Jamaican reggae singer, songwriter, musician, and guitarist who achieved international fame and acclaim. Starting out in 1963 with the group The Wailers, he forged a distinctive songwriting and vocal style that would later resonate with audiences worldwide. The Wailers would go on to release some of the earliest reggae records with producer Lee "Scratch" Perry. After the Wailers disbanded in 1974, Marley pursued a solo career upon his relocation to England that culminated in the release of the album Exodus in 1977, which established his worldwide reputation and produced his status as one of the world's best-selling artists of all time, with sales of more than 75 million records. Exodus stayed on the British album charts for fifty-six consecutive weeks. It included four UK hit singles: "Exodus", "Waiting in Vain", "Jamming", and "One Love". In 1978 he released the album Kaya, which included the hit singles "Is This Love" and "Satisfy My Soul". Diagnosed with a type of malignant melanoma in 1977, Marley died on 11 May 1981 in Miami at the age of 36. He was a committed Rastafari who infused his music with a sense of spirituality. He is considered one of the most influential musicians of all time and credited with popularizing reggae music around the world, as well as serving as a symbol of Jamaican culture and identity. The BOB MARLEY TRUTH PEACE sign would be a great sign for any Music Club, record store or Man Cave, Hed Den or Chick pad Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The image design on this sign is copyright 2015 and an official licensed product of BOB MARLEY (TM) FIFTY SIX HOPE ROAD MUSIC LTD - under licensing to Desperate Enterprises Inc UPC 605279121151 D120811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BOB MARLEY

    BOB MARLEY was renowned - born Robert Nesta "Bob" Marley, OM (6 February 1945 – 11 May 1981) was a Jamaican reggae singer, songwriter, musician, and guitarist who achieved international fame and acclaim. Starting out in 1963 with the group The Wailers, he forged a distinctive songwriting and vocal style that would later resonate with audiences worldwide. The Wailers would go on to release some of the earliest reggae records with producer Lee "Scratch" Perry. After the Wailers disbanded in 1974, Marley pursued a solo career upon his relocation to England that culminated in the release of the album Exodus in 1977, which established his worldwide reputation and produced his status as one of the world's best-selling artists of all time, with sales of more than 75 million records. Exodus stayed on the British album charts for fifty-six consecutive weeks. It included four UK hit singles: "Exodus", "Waiting in Vain", "Jamming", and "One Love". In 1978 he released the album Kaya, which included the hit singles "Is This Love" and "Satisfy My Soul". Diagnosed with a type of malignant melanoma in 1977, Marley died on 11 May 1981 in Miami at the age of 36. He was a committed Rastafari who infused his music with a sense of spirituality. He is considered one of the most influential musicians of all time and credited with popularizing reggae music around the world, as well as serving as a symbol of Jamaican culture and identity. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each BOB MARLEY is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • HIGHWAY TO HELL

    The HIGHWAY TO HELL tin sign features a hot rod, the she devil and a Route 666 sign Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The image design on this sign is courtesy of and copyright by GDerbyshire under licensing to Desperate Enterprises Inc UPC 605279121236 - ICCD12811 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.