SHOP HERE

  • CAMARO SS

    The CAMARO SS novelty plate shows the first generation Chevrolet Camaro that appeared in Chevrolet dealerships in September 1966, for the 1967 model year on a brand-new rear-wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible with a choice of six-cylinder and V8 power plants. The first-generation Camaro was built through the 1969 model year. The Camaro's standard drive train was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) or a 327 cu in (5.4 L) (307 cu in (5.0 L) later in 1969) V8 engine, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS396 cars was the Turbo 400 three-speed automatic. There was a plethora of other options available all three years, including three main packages: The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model. The SS performance package consisted of a 350 or 396 cu in V8 engine and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging. The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am series. It included a solid-lifter 302 V8, 4-speed transmission, power disc brakes, and two wide stripes down the hood and trunk lid. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MINI THREE MODELS

    The MINI THREE MODELS novelty plate shows three models of the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. BMW acquired the Rover Group (formerly British Leyland) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using the MINI name This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • MINI COOPER S

    The MINI COOPER S novelty plate shows the car that was part of the Mini range produced by the English based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture. It's space-saving transverse engine front-wheel drive layout – allowing 80 percent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The performance versions, the Mini Cooper and Cooper "S," were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965 and 1967. In 1966, the first-placed Mini was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT KINGSWOOD UTE & SEDAN

    The HOLDEN HT KINGSWOOD UTE & SEDAN novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT KINGSWOOD UTE

    The HOLDEN HT KINGSWOOD UTE novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN HT KINGSWOOD SEDAN

    The HOLDEN HT KINGSWOOD SEDAN novelty plate shows the car that was produced by Holden in Australia between 1969 and 1970. HT Belmont, Kingswood and Premier models were introduced in May 1969, replacing their Holden HK series equivalents which had been in production since 1968. HT Brougham and Monaro models followed in June 1969. Noticeable changes from the HK series included new grilles, new tail lights, flatter rear flanks and a wider back window. Other changes included increased track width, revised suspension, a new instrument panel and synchromesh on all forward gears on manual gearbox models. The mainstream HT series was offered in four-door sedan and five-door station wagon body styles in three trim levels: Belmont sedan  /  Belmont wagon  / Kingswood sedan  / Kingswood wagon  / Premier sedan  / Premier wagon. The Brougham, which used a body with an extended boot, was available in one model only - the Brougham sedan The Monaro was offered in three two-door coupe models: Monaro coupe  / Monaro GTS coupe  /  Monaro GTS 350 coupe Commercial vehicle derivatives were available in two-door coupe utility and two-door panel van body styles in two trim levels: Belmont utility  / Belmont panel van  / Kingswood utility This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • USA SIZE PLATE – PERSONALISED CUSTOM MADE

    A USA SIZE PLATE - PERSONALISED CUSTOM MADE is a way of personalising your own US Sized Novelty Plate - these embossed plates can be done as "One Offs" or in large numbers and production turnaround is on a weekly cycle. USA Size plate (30.5cm x 15.5cm) without mounting holes. (Sorry but no holes in the first batch of 50 but next batch will have holes) Can have one line of embossed characters in a choice of three different heights Large (L) = 80mm / Medium (M) =60mm and Small (S) =50mm. If 'L' or ‘M’ chosen no more than 6 characters including one space. If ‘S’ is chosen no more than 9 characters including one space. The embossed characters are normally placed central on the plate but can be bottom justified but not top justified. USA size plates are available in the following background colours: White, Black. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon  There is a Colour chart posted on this website HERE  or there is an icon to click on in the linked products below In addition to diamonds, dashes, dot/fullstops, we now have even more punctuation options on characters that can be embossed as shown on an attached image. The new characters are:   a proper number one with a serif - 1   a hash tag - #   apostrophe – ‘   and symbol - &   at symbol - @  By law we must avoid character combinations that are similar to state issued licenced or personalised registration plates and in general this includes avoiding the following Alpha Numeric combinations:  AAA NN / AA NNN / AAA NNN / NNN AAA / NNN AA  / AA NN AA  / NAAANNN. For bona fide car collectors and exhibitors we can get around this if our customer provides a signed statement of intentional use. HOW TO ORDER: First select the number of plates you want to buy, then click the 'Add to Order' button. Then click 'View Order'. Check the plates you want are listed and then click "Add Details and Send" - in this screen there is an "Order Notes" box where you can type in the characters you want on the plate and the colours required, then simply complete your details in the required fields and then hit 'SEND MY ORDER NOW'. You will not be asked for payment until we have ensured we have the details correctly understood  

  • SLOW THE *@#% DOWN

    The SLOW THE *@#% DOWN sign is great for anyone that lives on a dirt road and is fed up with dust! This is a Large Crossing Sign measuring 30 x 30 cm (12 x 12 ins), and is flat and non-embossed made from high quality aluminium, and the artwork applied by a dye sublimation process with a lovely gloss finish. It has two mounting holes, so can easily be hung on display indoors or outdoors. Each is shrink-sealed in plastic film and ready for retail display. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We carry only the best quality plates and signs that are manufactured today! Lightweight and durable – these fun and unique designs can be put anywhere and are sure to generate lots of fun conversation too! If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that "pricing is subject to change without notice", so too are "designs subject to change without notice". In 99.99% of cases, what you see on Dixie's website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn't always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • WOAH! SLOW DOWN

    The WOAH! SLOW DOWN  sign is great for anyone that HAS HORSES OR DOGS and is fed up with vehicles speeding in the area This is a Large Parking Sign measuring 30 x 46 cm (12 x 18 ins), and is flat and non-embossed made from high quality aluminium, and the artwork applied by a dye sublimation process with a lovely gloss finish. It has two mounting holes, so can easily be hung on display indoors or outdoors. Each is shrink-sealed in plastic film and ready for retail display. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We carry only the best quality plates and signs that are manufactured today! Lightweight and durable – these fun and unique designs can be put anywhere and are sure to generate lots of fun conversation too! If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that "pricing is subject to change without notice", so too are "designs subject to change without notice". In 99.99% of cases, what you see on Dixie's website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn't always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • SLOW PLEASE KEEP DUST DOWN

    The SLOW PLEASE KEEP DUST DOWN sign is great for anyone that lives on a dirt road and is fed up with dust! This is a Large Parking Sign measuring 30 x 46 cm (12 x 18 ins), and is flat and non-embossed made from high quality aluminium, and the artwork applied by a dye sublimation process with a lovely gloss finish. It has two mounting holes, so can easily be hung on display indoors or outdoors. Each is shrink-sealed in plastic film and ready for retail display. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We carry only the best quality plates and signs that are manufactured today! Lightweight and durable – these fun and unique designs can be put anywhere and are sure to generate lots of fun conversation too! If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that "pricing is subject to change without notice", so too are "designs subject to change without notice". In 99.99% of cases, what you see on Dixie's website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn't always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DUSTY PLEASE SLOW DOWN

    The DUSTY PLEASE SLOW DOWN sign is great for anyone that lives on a dirt road and is fed up with dust! This is a Large Parking Sign measuring 30 x 46 cm (12 x 18 ins), and is flat and non-embossed made from high quality aluminium, and the artwork applied by a dye sublimation process with a lovely gloss finish. It has two mounting holes, so can easily be hung on display indoors or outdoors. Each is shrink-sealed in plastic film and ready for retail display. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We carry only the best quality plates and signs that are manufactured today! Lightweight and durable – these fun and unique designs can be put anywhere and are sure to generate lots of fun conversation too! If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that "pricing is subject to change without notice", so too are "designs subject to change without notice". In 99.99% of cases, what you see on Dixie's website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn't always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • POPS GARAGE

    Our POPS GARAGE is a Euro Size plate (52cm x 11cm) with mounting holes.  Stock colour is white on Black background. It can be done with or without an apostrophe Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • PONTIAC SERVICE

    The PONTIAC SERVICE circular sign features Pontiac which was a brand of automobiles manufactured and sold by General Motors (GM); though production ended in 2010, Pontiac remains a registered and active trademark of GM. The Pontiac automobile brand was established in 1926 as a companion make for GM's more expensive line of Oakland automobiles. The Pontiac cars overtook its Oakland parent in popularity and supplanted the Oakland brand entirely by 1933. Pontiac became a companion make for Chevrolet. Pontiac was sold in the United States, Canada, and Mexico by GM. Pontiac was advertised as the performance division of General Motors for many years, while specializing in mainstream vehicles. Pontiac was relatively more popular in Canada, where for much of its history it was marketed as a low-priced vehicle. In late 2008 and early 2009, amid financial problems and restructuring efforts, GM announced it would discontinue manufacturing and marketing vehicles under the Pontiac brand by the end of 2010 and focus on four core brands in North America: Chevrolet, Buick, Cadillac, and GMC. The last Pontiac badged cars were built in December 2009, with one final vehicle built in January, 2010. Franchise agreements for Pontiac dealers expired October 31, 2010. This is a flat non-embossed sign measuring 12ins (30cm) diameter and is made from durable and long lasting high quality tin which can be hung inside or outside. Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. For protection from factory to customer each PONTIAC SERVICE circle sign is supplied in shrink wrap and is freighted with extra packing materials to ensure they arrive in tip-top condition and ready for hanging on display in store.

  • INDIAN MOTORCYCLE LOGO

    The INDIAN MOTORCYCLE LOGO circular sign features Indian - an American brand of motorcycles originally produced from 1901 to 1953 in Springfield, Massachusetts, United States. Hendee Manufacturing Company initially produced the motorcycles, but the name was changed to the Indian Motocycle Manufacturing Company in 1928. The Indian factory team took the first three places in the 1911 Isle of Man Tourist Trophy. During the 1910s, Indian became the largest manufacturer of motorcycles in the world. Indian's most popular models were the Scout, made from 1920 to 1946, and the Chief, made from 1922 until 1953, when the Indian Motocycle Manufacturing Company went bankrupt. Various organizations tried to perpetuate the Indian Brand name in subsequent years, with limited success. In 2011, Polaris Industries purchased Indian Motorcycles and moved operations from North Carolina and merged them into their existing facilities in Minnesota and Iowa. Since August 2013, Polaris has marketed multiple modern Indian motorcycles that reflect Indian's traditional styling. This is a flat non-embossed sign measuring 12ins (30cm) diameter and is made from durable and long lasting high quality tin which can be hung inside or outside. Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. For protection from factory to customer each INDIAN MOTORCYCLE LOGO circle sign is supplied in shrink wrap and is freighted with extra packing materials to ensure they arrive in tip-top condition and ready for hanging on display in store.

  • CHEVROLET BELAIR 50TH

    The CHEVROLET BELAIR 50TH Tin sign is one of several we have in Chevy classics. The Chevrolet Bel Air was a full-size automobile that was produced by Chevrolet (a division of General Motors) from 1950–1981. This sign was made in celebration of the Belairs 50th anniversary in 2007, and depicts the 2nd generation (1955–1957) car which superceded 1st generation with all new styling and power. It was first called the "Hot One" in GM's advertising campaign. The 1956 Bel Air received a face-lift with a more conventional full-width grille, pleasing those customers who didn't favor the Ferrari-inspired '55 front end. Distinctive two-tone bodyside treatments and graceful front and rear wheel openings completed the "speedline" restyling. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2006 by General Motors (barcode: 99A1692) under licensing to Desperate Enterprises UPC 605279113958 ICCDES12811. BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • LIVE TO RIDE RIDE TO LIVE

    The LIVE TO RIDE RIDE TO LIVE Tin sign features thecklassic bikers exopression LIVE TO RIDE Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each LIVE TO RIDE RIDE TO LIVE sign is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • INSANITY

    The INSANITY Tin sign Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each INSANITY sign is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • SHELL MOTOR OIL CAN

    The SHELL MOTOR OIL CAN Tin sign is one of several we have in motor oils. Wikipedia tells us Shell Oil Company is the United States-based subsidiary of Royal Dutch Shell, a multinational "oil major" of Anglo-Dutch origins, which is amongst the largest oil companies in the world. Approximately 22,000 Shell employees are based in the U.S. The U.S. head office is in Houston, Texas. Shell Oil Company, including its consolidated companies and its share in equity companies, is one of America's largest oil and natural gas producers, natural gas marketers, gasoline marketers and petrochemical manufacturers. Shell is the market leader through approximately 25,000 Shell-branded gas stations in the U.S. which also serve as Shell's most visible public presence. Shell Oil Company is a 50/50 partner with the Saudi Arabian government-owned oil company Saudi Aramco in Motiva Enterprises, a refining and marketing joint venture which owns and operates three oil refineries on the Gulf Coast of the United States. The Shell Oil Company Warehouse, built in 1925 and located at 425 S. N. 16th Ave. Phoenix, Arizona. It is listed in the National Register of Historic Places. Shell products include oils, fuels, and car services as well as exploration, production, and refining of petroleum products. The Shell Oil Refinery in Martinez, California, the first Shell refinery in the United States, supplies Shell and Texaco stations in the West and Midwest. Shell gasolines previously included the RU2000 and SU2000 lines (later there was a SU2000E) but they have been superseded by the V-Power line. In 1997, Shell and Texaco entered into two refining/marketing joint ventures. One combined their Midwestern and Western operations and was known as Equilon. The other, known as Motiva, combined the Eastern and Gulf Coast operations of Shell Oil and Star Enterprise, itself a joint venture between Saudi Aramco and Texaco. After Texaco merged with Chevron in 2001, Shell purchased Texaco's shares in the joint ventures. In 2002, Shell began converting these Texaco stations to the Shell brand, a process that was to be completed by June 2004 and was called "the largest retail re-branding initiative in American business history.". In the year 2016, Shell Nederland Raffinaderij BV (Shell Pernis) said that it has started a new aromatics unit at the large Pernis refinery in Rotterdam, the Netherlands. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each SHELL MOTOR OIL CAN sign is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • WISHIN I WAS FISHIN

    WISHIN I WAS FISHIN measures 12 x 6in (30 x 15cm) and is a lightly embossed product We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition If you would like signs or plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DEMOCRATIC REPUBLIC OF GEORGIA

    The DEMOCRATIC REPUBLIC OF GEORGIA FLAG is available only in one size 3x2ft (90x60cm) Wikipedia tells us that the Democratic Republic of Georgia existed from May 1918 to February 1921 and was the first modern establishment of a Republic of Georgia. The DRG was created after the collapse of the Russian Empire that began with the Russian Revolution of 1917. Its established borders were with the Kuban People's Republic and the Mountainous Republic of the Northern Caucasus in the north, the Ottoman Empire and the First Republic of Armenia in the south, and the Azerbaijan Democratic Republic in the southeast. It had a total land area of roughly 107,600 km² (by comparison, the total area of today's Georgia is 69,700 km²), and a population of 2.5 million. The republic's capital was Tbilisi, and its state language was Georgian. Proclaimed on May 26, 1918, on the break-up of the Transcaucasian Federation, it was led by the Georgian Social Democratic Party (Menshevik). Facing permanent internal and external problems, the young state was unable to withstand invasion by the Russian SFSR Red Armies, and collapsed between February and March 1921 to become a Soviet republic. Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • VATICAN

    The VATICAN FLAG is available in either 5x3ft or  3x2ft Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • SALE

    The SALE FLAG is available only in one size 3x2ft (90x60cm) Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • RAINBOW FLAG

    RAINBOW FLAG A rainbow flag is a multicolored flag consisting of the colors of the rainbow. The actual coloUrs shown may differ, but many of the designs are based on the traditional scheme of red, orange, yellow, green, blue, indigo, and violet, or some more modern division of the rainbow spectrum (often excluding indigo, and sometimes including cyan instead). There are several independent rainbow flags in use today. The most widely known worldwide is the pride flag representing LGBT pride. The peace flag is especially popular in Italy and the cooperative flag symbolizes the international co-operative movement. It is also used by Andean people to represent the legacy of the Inca Empire (Wiphala) and Andean movements. The RAINBOW FLAG FLAG is available in either 5x3ft or  3x2ft Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • KUWAIT

    The KUWAIT FLAG is available only in one size 3x2ft (90x60cm) Please read about the various types of flag below and then make your selection from the drop down menu Flags come in various types as described below and sizes are commonly referred to in feet rather than metres Decorative Flags: These have 2 grommets on LHS sleeve and are printed on polyester which makes for a lightweight flag with a variety of uses such as flying on indoor poles or wall décor. They are great for supporting favourite sports team; decoration in parades, marches and occasional flying on an outdoor flagpole. We emphasise these flags are not designed for prolonged flying on flagpoles as sun and wind would affect the lightweight material very quickly. There are two common sizes in decorative flags which are 5x3ft (150x90cm) and the smaller 3x2ft (90x60cm) Outdoor Flagpole Flags: These are a ‘trilobal’ material which is a knitted polyester for outdoor flag use which is long life, open weave, quick wicking and drying Note this is knitted polyester and not a woven polyester, with the latter being weaker and lighter fabric unsuitable for outdoor use. Our flags have double-stitched hems, and sewn loops so that you can attach Sista clips to secure them to the pole’s cords. The most common sizes in outdoor flags is 6x3ft (180x90cm) Sista Clips for Outdoor Flagpole Flags: The correct name is Inglefield clip or Brummel hook but commonly known as sister or sista. It’s a plastic clip for joining a flag or ensign quickly, easily and securely to flag halyards so that the flag can be hoisted. Each clip resembles a link of chain, with a split through one side. Hand Held Flags: These are printed on lightweight polyester with 2ft (60cm) plastic or wooden stick. They have a variety of uses such as parades, marches or supporting favourite sports team. They are 1.5x1ft (0.45×0.3m) Desk / Table Flags: These are miniature flags printed on lightweight polyester measuring 6x4inches (16x11cm) with an 11″ (28cm) plastic pole. They are used as hand held or can be stood on desktops when inserted into a special plastic base (not included in the price) Desk / Table Flag Bases: These are available to hold either 1,2,3,5,11 or 17 flags Patches: These measure 3.5”x2.25” (8.25×5.5cm) and are sewn or iron-on miniature embroidered cotton flags. They are used mainly by travellers who affix them to jackets, jeans, T-Shirts or backpacks

  • SHIT HAPPENS FLAG

    SHIT HAPPENS FLAG Size: 5ft x 3ft – 1.5m x0.9m. Made of polyester which has limited outdoor use as sun and wind would affect the material. These flags are lightweight flags and have a variety of uses such as sports team support; decoration; marches; occasional flying on a flagpole but we emphasise these flags are not designed for prolonged flying on flagpoles. The hoist edge is finished with 2 eyelets.

  • SALZBURG WITH COAT OF ARMS

    SALZBURG WITH COAT OF ARMS Size: 5ft x 3ft – 1.5m x0.9m. Made of polyester which has limited outdoor use as sun and wind would affect the material. These flags are lightweight flags and have a variety of uses such as sports team support; decoration; marches; occasional flying on a flagpole but we emphasise these flags are not designed for prolonged flying on flagpoles. The hoist edge is finished with 2 eyelets.

  • CHEVY AVENUE

    Our CHEVY AVENUE is a Euro Size plate (52cm x 11cm) without mounting holes. Soon to be available with mounting holes. Stock colour is silver on Black background Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • QUEENSLAND

    The QUEENSLAND novelty plate is all about the Sunshine State of Queensland (abbreviated as QLD). It's the second largest and third most populous state in the Commonwealth of Australia. Situated in the north east of the country, it is bordered by the Northern Territory, South Australia and New South Wales. To the east, Queensland is bordered by the Coral Sea and Pacific Ocean. Queensland's population is approx 4.7 mill, concentrated along the coast and particularly in the state's South East. The state is the world's sixth largest sub-national entity, with an area of 1,852,642 km2. The capital and largest city in the state is Brisbane, Australia's third largest city. Often referred to as the "Sunshine State", Queensland is home to 10 of Australia's 30 largest cities and is the nation's third largest economy. Tourism in the state, fuelled largely by its warm tropical climate, is a major industry. Queensland was first inhabited by Aboriginal Australians and Torres Strait Islanders. The first European to land in Queensland (and Australia) was Dutch navigator Willem Janszoon in 1606, who explored the west coast of the Cape York Peninsula near present-day Weipa. In 1770, Lieutenant James Cook claimed the east coast of Australia for the Kingdom of Great Britain. The colony of New South Wales was founded in 1788 by Governor Arthur Phillip at Sydney; New South Wales at that time included all of what is now Queensland, Victoria and Tasmania. Queensland was explored in subsequent decades until the establishment of a penal colony at Brisbane in 1824 by John Oxley. Penal transportation ceased in 1839 and free settlement was allowed from 1842. The state was named in honour of Queen Victoria, who on 6 June 1859 signed Letters Patent separating the colony from New South Wales. The 6th of June is now celebrated annually statewide as Queensland Day. Queen Victoria, who went on to become Britain and Australia's second longest reigning monarch, chose an eponymous name for the colony over Cooksland, which had been suggested by the influential local Presbyterian minister John Dunmore Lang in honour of navigator James Cook. Queensland achieved statehood with the Federation of Australia on 1 January 1901. Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with 37x13cm being the same size as those on a normal vehicle, and they have embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BUSH CHOOK

    The BUSH CHOOK novelty plate refers to a West Australian term of endearment for the girls around the area. It was originally a nickname given to the Emu by rural farmers and country folk of Australia, and nowadays it's also a bit of a nickname for the Emu Export beer which has found regained popularity We currently have a choice of two colours as shown in the drop down menu Each is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The BEST IN SHOW sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

  • WARNING BAD ASS DOG

    Our sign WARNING BAD ASS DOG is a fun collectible and affordable sign imported from the USA.  It measures 12in x 9in or 30cm x 23cm, and is a flat non-embossed product. Novelty Signs by definition in Wikipedia are humorous gift objects which are more often than not, specifically designed to serve no practical purpose, but are sold for their uniqueness, humour, or simply as something new (hence “novelty”, or newness). In general our Novelty Signs are either from America or England, of which many are manufactured in China. They are made of aluminium or tin, and we strive to carry only the highest quality novelty signs that are manufactured. All Dixies fun and unique designs will make a humerous and thoughtful gift and will look great hanging in your garage, shed, Man Cave, bar, games room or where ever you want to hang them.  They are sure to generate lots of fun conversation! The WARNING BAD ASS DOG sign is made from lightweight aluminium for durability and each is pre-drilled so ready to hang anywhere – even outside. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock that require licensing are in accordance with trademark and copyright requirements If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • IM A NURSE SUPERPOWER

    The IM A NURSE SUPERPOWER sign is great for the nursing family when you to want something unusual to give! This is a mini novelty street sign measuring 10 x 46 cm (4 x 18 ins), and is flat and non-embossed made from high quality aluminium, and the artwork applied by a dye sublimation process with a lovely gloss finish. It has two mounting holes, so can easily be hung on display indoors or outdoors. Each is shrink-sealed in plastic film and ready for retail display. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition We carry only the best quality plates and signs that are manufactured today! Lightweight and durable – these fun and unique designs can be put anywhere and are sure to generate lots of fun conversation too! If you would like a novelty sign or plate made to your own design, we can easily do this for you. in a variety of sizes. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that "pricing is subject to change without notice", so too are "designs subject to change without notice". In 99.99% of cases, what you see on Dixie's website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn't always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • TEACHER

    TEACHER measures 12 x 6in (30 x 15cm) and is a flat non-embossed product We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them.We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition If you would like signs or plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.