FORD THEMES

    • GTHO 351

      The GTHO 351 novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car.Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 secondsThe Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra.A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that's been producing and selling quality number plates for years.  The GTHO 351 sign can be hung inside or outside and each is pre-drilled so ready to hang.We sell for a great price and offer a wide variety so get yours today!BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

    • FORD GT 351

      The FORD GT 351 novelty plate relates to the GTHO Phase III. Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as "...simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms..." The GTHO's 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia's fastest four-door production car. Some interesting bits and pieces from Wikipedia - Top Speed: 227 km/h (141 mph) @ 6150rpm 0 - 60 mph - 6.5 seconds 0 – 100 km - 6.8 seconds Standing 1/4 mile (400m) - 14.4 seconds The Phase III GTHO is in incredibly high demand with collectors and investors. Good examples have been sold for prices in excess of A$700,000. Due to this demand, a small production run, and 'fewer than 100 remaining' there been a flow on effect into values of the lesser XW and other XY Falcons, particularly genuine GS and 'standard' GT models. Other models that have also benefited from the appreciation of the GTHO include the XA and XB GT hardtops, the earlier XW GTHO Phase 1 and 2 and the XC Cobra. A Falcon XY GTHO Phase III was sold at by Bonhams & Goodmans at auction for A$683,650 in March 2007. The car had only 40,000 km on the clock. The buyer of the car said it will be garaged, and that it won't be driven, but that he will be "keeping it as an investment". The sale price set a new auction record for Australian muscle cars. Whilst in June 2007 another Phase III sold for A$750,000. Shannons national auctions manager Christophe Boribon blames the global financial crisis for the collapse in values. "We reached an artificial high a couple of years ago but then the GFC hit. Now it is back to reality, " he said. "There is only a limited number of buyers out there for a car like that. "The car is a very rare car. The car is the holy grail of Australian muscle cars." Price new 1971: $5300 Value in 2007: $683,500 Value in 2008: close to $1 million Value in 2010: $331,000 This FORD GT 351 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • FORD LANYARD KEY CHAIN

      The FORD LANYARD KEY CHAIN is a great gift for the enthusiast We now supply a great range of novelty key rings, key chains and key lanyards which are fun colourful products featuring favourite movie characters from Disney or Warner Bros, as well as many popularly recognised logos. The automotive range of key rings, key chains and key lanyards compliments our huge range of Novelty number plates and signs. They are made to the highest quality by a US based company that has been partnering with the strongest, most well-known, iconic brands in the world, becoming the leader in licensed Automotive Accessories for over 40 years. The same company that has been supplying our quality automotive license plates for many years, and like the plates are all US licensed. The materials used vary as listed below and are described in the various product posts. Materials used range from: Heavy duty metal with an enamel finish Leather strap with metal logo Rubber with raised sections Plastisol - PVC in a liquid plasticizer resulting in a permanently solid product Lanyards are woven with a quick release safety breakaway clip on strap - approx: 60cm long x 2cm wide The key ring is 3 cm diameter chrome plated split ring with a clip to secure the keys Each is individually packaged, ready to display We also offer two different display stands for these products - website details of the stands are shown at this link - Our large stand is very robust double sided black Perspex like material with a capacity for over 200 items, using 25 x 5cm hooks and 25 x 7cm hooks. It measures 51cm high by 39cm  wide with a 12cm deep base The small stand is black powder coated wire with 8 hooks each 5cm in length and they rotate on a central spindle    

    • FORD MUSTANG 50 YEARS KEY CHAIN

      The FORD MUSTANG 50 YEARS KEY CHAIN is a great gift for the enthusiast We now supply a great range of novelty key rings, key chains and key lanyards which are fun colourful products featuring favourite movie characters from Disney or Warner Bros, as well as many popularly recognised logos. The automotive range of key rings, key chains and key lanyards compliments our huge range of Novelty number plates and signs. They are made to the highest quality by a US based company that has been partnering with the strongest, most well-known, iconic brands in the world, becoming the leader in licensed Automotive Accessories for over 40 years. The same company that has been supplying our quality automotive license plates for many years, and like the plates are all US licensed. The materials used vary as listed below and are described in the various product posts. Materials used range from: Heavy duty metal with an enamel finish Leather strap with metal logo Rubber with raised sections Plastisol - PVC in a liquid plasticizer resulting in a permanently solid product Lanyards are woven with a quick release safety breakaway clip on strap - approx: 60cm long x 2cm wide The key ring is 3 cm diameter chrome plated split ring with a clip to secure the keys Each is individually packaged, ready to display We also offer two different display stands for these products - website details of the stands are shown at this link - Our large stand is very robust double sided black Perspex like material with a capacity for over 200 items, using 25 x 5cm hooks and 25 x 7cm hooks. It measures 51cm high by 39cm  wide with a 12cm deep base The small stand is black powder coated wire with 8 hooks each 5cm in length and they rotate on a central spindle    

    • FORD RACING BLUE OVAL ENAMEL KEY CHAIN

      The FORD RACING BLUE OVAL ENAMEL KEY CHAIN is a great gift for the enthusiast We now supply a great range of novelty key rings, key chains and key lanyards which are fun colourful products featuring favourite movie characters from Disney or Warner Bros, as well as many popularly recognised logos. The automotive range of key rings, key chains and key lanyards compliments our huge range of Novelty number plates and signs. They are made to the highest quality by a US based company that has been partnering with the strongest, most well-known, iconic brands in the world, becoming the leader in licensed Automotive Accessories for over 40 years. The same company that has been supplying our quality automotive license plates for many years, and like the plates are all US licensed. The materials used vary as listed below and are described in the various product posts. Materials used range from: Heavy duty metal with an enamel finish Leather strap with metal logo Rubber with raised sections Plastisol - PVC in a liquid plasticizer resulting in a permanently solid product Lanyards are woven with a quick release safety breakaway clip on strap - approx: 60cm long x 2cm wide The key ring is 3 cm diameter chrome plated split ring with a clip to secure the keys Each is individually packaged, ready to display We also offer two different display stands for these products - website details of the stands are shown at this link - Our large stand is very robust double sided black Perspex like material with a capacity for over 200 items, using 25 x 5cm hooks and 25 x 7cm hooks. It measures 51cm high by 39cm  wide with a 12cm deep base The small stand is black powder coated wire with 8 hooks each 5cm in length and they rotate on a central spindle    

    • FORD BLUE OVAL ENAMEL KEY CHAIN

      The FORD BLUE OVAL ENAMEL KEY CHAIN is a great gift for the enthusiast We now supply a great range of novelty key rings, key chains and key lanyards which are fun colourful products featuring favourite movie characters from Disney or Warner Bros, as well as many popularly recognised logos. The automotive range of key rings, key chains and key lanyards compliments our huge range of Novelty number plates and signs. They are made to the highest quality by a US based company that has been partnering with the strongest, most well-known, iconic brands in the world, becoming the leader in licensed Automotive Accessories for over 40 years. The same company that has been supplying our quality automotive license plates for many years, and like the plates are all US licensed. The materials used vary as listed below and are described in the various product posts. Materials used range from: Heavy duty metal with an enamel finish Leather strap with metal logo Rubber with raised sections Plastisol - PVC in a liquid plasticizer resulting in a permanently solid product Lanyards are woven with a quick release safety breakaway clip on strap - approx: 60cm long x 2cm wide The key ring is 3 cm diameter chrome plated split ring with a clip to secure the keys Each is individually packaged, ready to display We also offer two different display stands for these products - website details of the stands are shown at this link - Our large stand is very robust double sided black Perspex like material with a capacity for over 200 items, using 25 x 5cm hooks and 25 x 7cm hooks. It measures 51cm high by 39cm  wide with a 12cm deep base The small stand is black powder coated wire with 8 hooks each 5cm in length and they rotate on a central spindle    

    • 68 GT

      The 68 GT normally refers to the 1968 Mustang Fastback GT. This novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • MACH 1

      MACH 1 is one for the Mustang enthusiast, and this novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • SHELBY

      The SHELBY is one for the MUSTANG enthusiasts, and the SHELBY novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • GT 350

      The GT 350 novelty plate relates to the legendary Aussie muscle car . Winner of the 1971 Bathurst 500, driven by Allan Moffat, the Phase III has been described as “…simply one of the best cars in the world, a true GT that could take on Ferraris and Astons on their own terms…” The GTHO 351 Cleveland engine output was understated as 300 bhp (224 kW) to satisfy insurers. It is generally accepted to produce in the region of 350-380 bhp (265 kW -283 kW). Initial cars were equipped with an electrical rev limiter which came into effect at 6,150 rpm. With the rev limiter disabled, the engine was reputed to pull in excess of 7,000 rpm, even in 4th gear. The Phase III GTHO was Australia’s fastest four-door production car. Some interesting bits and pieces from Wikipedia – Top Speed: 227 km/h (141 mph) @ 6150rpm 0 – 60 mph – 6.5 seconds 0 – 100 km – 6.8 seconds Standing 1/4 mile (400m) – 14.4 seconds This GT 350 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • 1965 BLUE MUSTANG FASTBACK

      1965 BLUE MUSTANG FASTBACK The first-generation Ford Mustang was manufactured by Ford from March 1964 until 1973. The introduction of the Mustang created a new class of automobile known as the pony car. The Mustang’s styling, with its long hood and short deck, proved wildly popular and inspired a host of competition. It was initially introduced as a hardtop and convertible with the fastback version put on sale in August 1964. At the time of its introduction, the Mustang, sharing its underpinnings with the Falcon, was slotted into a compact car segment. With each revision, the Mustang saw an increase in overall dimensions and in engine power. The 1971 model saw a drastic redesign to its predecessors. After an initial surge, sales were steadily declining, as Ford began working on a new generation Mustang. With the onset of the 1973 oil crisis, Ford was prepared, having already designed the smaller Mustang II for the 1974 model year. This new car had no common components with preceding models. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2003 Ford Motor Company under license to Sign Of The Times with images by DavidG Photography BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • XT GT

      The XT GT is a The Ford Falcon (XT) is a full-size car that was produced by Ford Australia from 1968 to 1969. It was the second iteration of the second generation of this Australian-made model and also included the Ford Fairmont (XT)—the luxury-oriented version of the Falcon. The XT GT novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD ALWAYS AHEAD

      This great looking sign FORD ALWAYS AHEAD features Ford Motor Company – the American multinational automaker headquartered in Dearborn, Michigan, a suburb of Detroit. It was founded by Henry Ford and incorporated on June 16, 1903. The company sells automobiles and commercial vehicles under the Ford brand and most luxury cars under the Lincoln brand. Ford also owns Brazilian SUV manufacturer, Troller, and Australian performance car manufacturer FPV. In the past, it has also produced tractors and automotive components. Ford owns an 8% stake in Aston Martin of the United Kingdom, and a 49% stake in Jiangling of China. It also has a number of joint-ventures, one in China (Changan Ford), one in Taiwan (Ford Lio Ho), one in Thailand (AutoAlliance Thailand), one in Turkey (Ford Otosan), and one in Russia (Ford Sollers). It is listed on the New York Stock Exchange and is controlled by the Ford family, although they have minority ownership (but majority of the voting power). Ford introduced methods for large-scale manufacturing of cars and large-scale management of an industrial workforce using elaborately engineered manufacturing sequences typified by moving assembly lines; by 1914, these methods were known around the world as Fordism. Ford’s former UK subsidiaries Jaguar and Land Rover, acquired in 1989 and 2000 respectively, were sold to Tata Motors in March 2008. Ford owned the Swedish automaker Volvo from 1999 to 2010. In 2011, Ford discontinued the Mercury brand, under which it had marketed entry-level luxury cars in the United States, Canada, Mexico, and the Middle East since 1938. During the financial crisis at the beginning of the 21st century, it was close to bankruptcy, but it has since returned to profitability. Ford is the second-largest U.S.-based automaker (preceded by General Motors) and the fifth-largest in the world (behind Toyota, VW, Hyundai-Kia and General Motors) based on 2015 vehicle production. At the end of 2010, Ford was the fifth largest automaker in Europe. Ford is the eighth-ranked overall American-based company in the 2010 Fortune 500 list, based on global revenues in 2009 of $118.3 billion. In 2008, Ford produced 5.532 million automobiles and employed about 213,000 employees at around 90 plants and facilities worldwide. The company went public in 1956 but the Ford family, through special Class B shares, still retain 40 percent voting rights Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. This is a 'large parking sign' measuring 45 x 30cm (18 x 12ins)  and is made in the USA from high quality aluminium they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! This is a licensed product Has a sticker with FORD logo - then wording Official Licenced Product. Then a scannable QR BARCODE and a licence no: 015206880FD  85C33  store.ford.com/rewards BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD F150 AMERICAN UTE

      The FORD F150 AMERICAN UTE plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced Ford Product 9681 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD RED BELLY

      The FORD RED BELLY MODEL circular sign features The Ford 8N series manufactured 1947-1952. N-Series tractors are a series of farm tractors that were produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models. The 9N was the first American made production-model tractor to incorporate Harry Ferguson's three-point hitch system, a design still used on most modern tractors today. It was released in October 1939. The 2N, introduced in 1942, was the 9N with some improved details. The 8N, which debuted in July 1947, was a largely new machine featuring more power and an improved transmission. It proved to be the most popular farm tractor of all time in North America.. Has a sticker with FORD logo - then wording Official Licenced Product. Ford Oval and namplates are registered trademarks owned and licenced by Ford Motor Company. Manufactured by 49X95 www.ford.com. Hologram code 012359531FD  D1054 This circular sign comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. Circular Signs are 30cm (12 ins) diameter with mounting holes, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • THE LEGEND LIVES MUSTANG

      THE LEGEND LIVES MUSTANG The Ford Mustang was originally based on the platform of the second generation North American Ford Falcon, a compact car. The original Mustang I 4-seater concept car had evolved into the 1962 Mustang II 2-seater prototype, which Ford used to pretest how the public would take interest in the first production Mustang which was released as the 1964 1/2, with a slight variation on the front end and a top that was 2.7 inches shorter than the 1963 Mustang II. Introduced early on April 17, 1964, and thus dubbed as a “1964½” model by Mustang fans, the 1965 Mustang was the automaker’s most successful launch since the Model A Ford, and has undergone several transformations to its current 6th generation. The Mustang created the “pony car” class of American automobiles. Sports car like coupes with long hoods and short rear decks and gave rise to competitors such as the Chevy Camaro; Pontiac Firebird; AMC Javelin; Chrysler’s revamped Plymouth Barracuda and the first generation Dodge Challenger. The Mustang is also credited for inspiring the designs of coupés such as the Toyota Celica and Ford Capri. Ford is one of the largest automobile manufacturers of the world. It has been in running for over 100 years now, and is still making its mark all over the world. It constantly thrives to make the best automated vehicles. Ford Motor Company manufactures unique designs and their cars are known to be the best quality available in the market. The company has garnered millions of loyal fans and customers. Has a sticker with FORD logo - then wording Official Licenced Product. Then a scannable QR BARCODE and a licence no: 010683966FD  F26C8. store.ford.com/rewards Hologram code: 043953056FD  9604C This circular sign comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. Circular Signs are 30cm (12 ins) diameter with mounting holes, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD XY FALCON PANEL VAN

      The FORD XY FALCON PANEL VAN is part of the The Ford Falcon XY range that was produced by Ford in Australia from 1970 to 1972. It was the fourth and last iteration of the second generation of this Australian-made model and also included the Ford Fairmont (XY)—the luxury-oriented version of the Falcon. The XY Falcon was released in October 1970 replacing the XW Falcon. The XY was a facelift of the XW, featuring a new divided grille and redesigned tail lights. Improvements were made to seating, safety equipment and ride quality. The XY Falcon range featured eight passenger vehicles and three commercial models: Ford Falcon Sedan; Ford Falcon Wagon; Ford Falcon 500 Sedan; Ford Falcon 500 Wagon; Ford Futura Sedan; Ford Fairmont Sedan; Ford Fairmont Wagon; Ford Falcon GT Sedan; Ford Falcon Utility; Ford Falcon Van and Ford Falcon 500 Utility Futura and Fairmont models, whilst marketed as part of the XY Falcon range, were not officially referred to or badged as Falcons. A GS Rally Pack was available as an option on Falcon 500, Futura and Fairmont Sedans and Wagons. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • MUSTANG THE LEGEND LIVES AMERICAN BRED

      MUSTANG THE LEGEND LIVES AMERICAN BRED is all about the legendary MUSTANG. The Ford Mustang was originally based on the platform of the second generation North American Ford Falcon, a compact car. The original Mustang I 4-seater concept car had evolved into the 1962 Mustang II 2-seater prototype, which Ford used to pretest how the public would take interest in the first production Mustang which was released as the 1964 1/2, with a slight variation on the front end and a top that was 2.7 inches shorter than the 1963 Mustang II. Introduced early on April 17, 1964, and thus dubbed as a “1964½” model by Mustang fans, the 1965 Mustang was the automaker’s most successful launch since the Model A Ford, and has undergone several transformations to its current 6th generation. The Mustang created the “pony car” class of American automobiles. Sports car like coupes with long hoods and short rear decks and gave rise to competitors such as the Chevy Camaro; Pontiac Firebird; AMC Javelin; Chrysler’s revamped Plymouth Barracuda and the first generation Dodge Challenger. The Mustang is also credited for inspiring the designs of coupés such as the Toyota Celica and Ford Capri. Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. This is a 'large parking sign' measuring 45 x 30cm (18 x 12ins)  and is made in the USA from high quality aluminium they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! This is a licensed product Has a sticker with FORD logo - then wording Official Licenced Product. Then a scannable QR BARCODE and a licence no: 001986860FD  C0B60 - store.ford.com/rewards BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD TRUCKS

      Extremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm). Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

    • Ford ZC Fairlane 500 V8

      The Ford ZC Fairlane 500 V8 is part of the the Ford Fairlane range that were produced in a series of models by Ford Australia between 1959 (with the LTD commencing production in 1973) and 2007. From 1959 to 1964, the Fairlane was a locally assembled version of the American Ford Fairlane which had taken its name from Henry Ford's estate, Fair Lane, near Dearborn, Michigan. This was Ford Australia's top-of-the-range model until replaced by an Australian-assembled version of the full-size American Ford Galaxie. In 1967, Ford Australia reintroduced the Fairlane, this time as an Australian-developed, luxury, long-wheelbase version of its mainstream Falcon, positioned between the Falcon and the Galaxie. The locally assembled Galaxie evolved into the LTD which was itself replaced in 1973 by an Australian-developed, Fairlane-based model, also known as the Ford LTD. In North America, unlike its designation in Australia, it was not considered a luxury vehicle. In Australia, "LTD" originally stood for "Lincoln Type Design", although Ford Australia later promoted a connection with the meaning "Limited". The Fairlane and LTD competed in the marketplace with the Holden Brougham (1968–1971), the Statesman (1971–1984) and later with the Holden Statesman and Caprice (1990–2007). Ford produced the Fairlane/LTD at Campbellfield, Victoria, and Eagle Farm, Queensland, in the early years. Until around March/April 1978 with the upcoming release of the Ford Falcon (XD) and its derivatives, Ford consolidated Falcon production at Campbellfield and Fairlane/LTD manufacturing to Eagle Farm. Around the release of the next generation during the EA Falcon era (1988), Eagle Farm ceased manufacture of cars and only produced heavy trucks until its closure in 1998. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford ZB Fairlane 500 V8

      The Ford ZB Fairlane 500 V8 is part of the The Ford Fairlane / LTD range of luxury vehicles produced in a series of models by Ford in Australia between 1959 and 2007. The Ford Fairlane ZB 500 was a model change to the ZB series in March 1968 saw the 200 grow to 221-cubic-inch (3.62 L) and the 289 grow to 302-cubic-inch (4.95 L), the top model remaining the Fairlane 500 with the larger engine. The Fairlane name badge on the rear guards was now in script rather than capitals as it had been on the ZA. The only notable external change was the tail-light design, again following the general look of the Falcon (in this case the XT). The base model was now known as Fairlane Custom. The Fairlane and LTD competed in the marketplace with the Holden Brougham (1968–1971), the Statesman (1971–1984) and later with the Holden Statesman and Caprice (1990–2007). There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford ZA Fairlane

      The Ford ZA Fairlane is part of the The Ford Fairlane range that was produced by Ford in Australia. The ZA was introduced in March 1967, designed and built in Australia although its front end styling resembled the American Ford Falcon sedan of that year (except for the quad headlights). The body shape was similar to the 1966–67 US Fairlane sedan, however. Offered as the Fairlane and the Fairlane 500, it was based on the Australian XR Falcon. The 2819 mm wheelbase of the Falcon was stretched to 2946 mm, the front and centre body sections were retained and a new twin headlight grille was added. The rear quarter panels and boot from the US Fairlane were used and square taillights replaced the round units used on the Falcon. The Fairlane was equipped with a 200-cubic-inch (3.3 L) six-cylinder engine as standard with a 289-cubic-inch (4.74 L) V8 as an option. The Fairlane 500 featured the 289-cubic-inch (4.74 L) V8 as standard equipment. The six-cylinder engine was available with manual or automatic transmission and the V8 only with an automatic. Production of the ZA Fairlane totalled 8,814 vehicles. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford XT Falcon Fairmont sedan

      The Ford XT Falcon Fairmont sedan is part of the The Ford Falcon range that was produced by Ford Australia from 1968 to 1969. It was the second iteration of the second generation of this Australian-made model and also included the Ford Fairmont (XT)—the luxury-oriented version of the Falcon. The XT Falcon range was introduced in March 1968 as a facelifted version of the XR Falcon, which it replaced. The XT featured a revised grille and taillights and improved safety features including split-system brakes, larger tyres and electrically operated windscreen washers. Standard equipment in the luxury Fairmont models included bucket seats, front disc brakes, a heater/demister, a wood-grain dash, carpet and courtesy lamps in all four doors. The Fairmont Wagon featured an electrically operated tailgate. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford XE Fairmont Ghia

      The FORD XE Fairmont Ghia is part of the The Ford Fairmont range that was produced by Ford in Australia from from 1965 to 2008. It was available as a four-door sedan throughout its life, as a five-door station wagon from its introduction through to 2002, and as a two-door hardtop from 1972 to 1978. Australian Ford Fairmont sedans and wagons were exported to the United Kingdom. Though large compared to models in Ford's European range, they had a reputation for reliability. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford XD Falcon Fairmont

      The Ford XD Falcon Fairmont is part of the The Ford Falcon range that was produced by Ford in Australia from 1979 to 1982. It was the first iteration of the fourth generation of this Australian-made model and also included the Ford Fairmont (XD)—the luxury-oriented version of the Falcon. The Falcon XD was released in March 1979 replacing the Falcon XC. It featured a new smaller body with no reduction in interior space. Stylistically, the XD was strongly influenced by the European Ford Granada Mark II of 1977. The only common components shared between the Granada and the Falcon however were the headlights.Unlike its predecessor, the XD range did not include a 2-door Hardtop model. The base engine offered in the XD range was a 3.3-litre six cylinder engine. Other choices were a 4.1-litre (250 cu in) six cylinder, a 4.9-litre (302 cu in) eight cylinder and a 5.8-litre (351 cu in) eight cylinder engine. Transmissions available were a three speed column shift manual for six cylinder versions, the popular four speed manual floor shift, and the most popular transmission choice, the three speed automatic with the selector lever located either on the steering column or the floor. All engines had a carburettor with electronic ignition. In June 1980 the 3.3 and 4.1 inline six's iron cylinder head was replaced by an alloy head. A total of 197,293 XD Falcons were built prior to the XD being replaced by the Falcon XE in March 1982. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford Mustang Shelby GT350

      Our Ford Mustang Shelby GT350 is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford Mustang II Mach 1

      Our FORD Mustang II Mach 1 is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Ford Mustang 1966 Coupe

      Our FORD Mustang 1966 COUPE is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD Mustang 81 Cobra Fox

      Our FORD Mustang 81 Cobra Fox is part of our Classic Ford range to line up alongside the Holdens. We have 4 MUSTANG plates to choose from ranging across the first 3 generations of Mustang from 1st generation (1964–1973) then Second generation (1974–1978) and on to Third generation (1979–1993). There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD XC Falcon GS

      The FORD XC Falcon GS is part of the The Ford Falcon range that was produced by Ford in Australia from 1970 to 1972. The XC series was a facelift of the XB Falcon, itself an upgrade of the XA Falcon which had entered production in 1972. Introduced in July 1976, the XC was the first model to comply with the new pollution regulations specified under Australian Design Rule 27A. The response to the 1st of July 1976, mandatory anti-pollution laws (ADR 27A), was to redevelop the Falcon six cylinder engines with a cross-flow head for greater efficiency. Visually, the XC Falcon was given a restyle treatment. The XC had an less aggressive nose which incorporated two round headlights on Falcon models and two rectangular headlights on Fairmont models. Ford also addressed the vision problems of the XA and XB by going to great expense and redesigning the rear door windows and installing an all-new dash and installing higher front seats. It was the last model Falcon to use coke bottle styling and was replaced with the XD Falcon in 1979. Total production of the XC range reached 171,082 vehicles prior to the replacement of the XC by the XD Falcon in March 1979 There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD XC Falcon Cobra

      The FORD XC Falcon Cobra is part of the the Ford Falcon range that was produced by Ford in Australia from 1970 to 1972. In August 1978 Ford introduced the limited production Falcon Cobra, a high-performance version of the XC Falcon Hardtop. Only 400 were built, including 4.9-litre and 5.8-litre street versions and 30 "Bathurst Specials" When final production of the XC Hardtop at the Broadmeadows Assembly plant was ending in March 1978, more than 400 body shells were left unsold and Ford Australia faced a dilemma of how to shift them, rather than scrap them. When an original proposal to turn these cars into black and gold Playboy-themed cars (complete with "bunny" decals) was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was also M.D. of Ford Australia at that time (from 1978 to 1980). He and a local design team elected to capitalise on Allan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "Shelby Mustang" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype Falcon Cobra was built in late April 1978 and production began that same July. The cars were painted Bold Blue with an overlay of Sno White, with Olympic Blue accent stripes separating the two colours ... "Cobra" emblem decals, a throwback to Carroll Shelby's Mustangs of the 1960s, were affixed to the front fenders, along with a name decal at the rear. Unusually, the bodyshells were painted blue first, the intended area of blue stripes and sills then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially-numbered plaque (from 001 to 400) on the dash. The first 200 Cobras produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland ... the only exceptions to this being build number 001 is a 302ci (4.9 litre) V8 and build number 351 is a 351ci (5.8 litre) V8. Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes, limited slip differential, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were uniformly black, with Cobra specific cloth seat inserts in black with blue stripes that match those on the outside body. Cars numbered from 002 to 0031 were known as Option 97 specification, the so-called "Bathurst Cobras", fitted with parts to allow homologation for racing, including twin radiator fans switchable from the dash, a gearbox oil cooler, suspension bracing and reworked rear wheel body housings. They were most easily identified from the other 370 Option 96 Cobras via their large (and functional) rear-opening bonnet bulge. Allan Moffat's "Moffat Ford Dealers" race cars of late 1978 shared the same body paint decoration as the road cars. Falcon Cobras have become increasingly revered by collectors across Australia and a mint example might be worth upwards of $100,000 ... with Option 97 cars (rarely offered up for sale) likely to fetch a further premium. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FORD XA Falcon GT 1972-1973

      The FORD XA Falcon GT 1972-1973 novelty plate is of course all about the Ford Falcon XA, a full-size car that was produced by Ford Australia from 1972 to 1973. It was the first iteration of the third generation of this Australian-made model and also included the Ford Fairmont (XA)—the luxury-oriented version of the Falcon. Sold between March 1972 and September 1973, the XA series was the first Falcon to be designed (with assistance from Ford's US headquarters) and manufactured in Australia. It featured an entirely new body which was larger and more roomy than that of its XY series predecessor, giving it the "coke-bottle" look. The XA range also had a longer list of options, although the choice of engines carried over from the previous XY Falcon range. All V8 302 CID and most 351 CID "Cleveland" engines were now Aussie made. GT Falcons could have Aussie or imported 351 CID V8s fitted. Wagons, utilities and panel vans now featured a longer wheelbase than the sedan. Fairmont wagons had a dual-action tailgate that could be opened either downwards or sideways, optional on base model Falcon and Falcon 500 Wagons. The addition of a two-door hardtop to the range marked the first time that this body style had been offered on an Australian Falcon since the XP series of 1965–1966. The hardtop's longer doors with frameless windows were shared with the utility and van, with a different shape glass to suit the commercial vehicles' body apertures. The shorter doors of the sedan and wagon with their framed windows were also available with optional quarter vent windows, though these were very rare, mainly fitted to cars in the hotter parts of Australia. This option was available in the subsequent XB and XC models, though very scarce. The XA Falcon range were the first Falcons fitted with in-dash vents for face level flow-thru ventilation, although they only worked while the car was in motion. A total of 129,473 XAs were built. While successful, the XA Falcon range proved to be short-lived as it gained a significant frontal appearance update to become the XB series in September 1973. Sedans and Wagons were introduced in March 1972, the Hardtops in August 1972 and the Utes and Vans in October of that year. Body styles included: Falcon Sedan / Falcon Wagon / Falcon 500 Sedan / Falcon 500 Wagon / Falcon 500 Hardtop / Futura Sedan / Fairmont Sedan / Fairmont Wagon / Fairmont Hardtop / Falcon GT Sedan / Falcon GT Hardtop / Falcon Ute / Falcon Van and Falcon 500 Ute. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.