Ford with images

  • FORD XE FAIRMONT GHIA

    The FORD XE FAIRMONT GHIA  novelty plate shows the car that was produced by Ford Australia from 1982 to 1984. It was the second iteration of the fourth generation of this Australian-made model and also included the Ford Fairmont (XE)—the luxury-oriented version of the Falcon. The XE range consisted of nine models marketed as follows: Falcon utility / Falcon van / Falcon GL ute / Falcon GL van / Falcon GL sedan / Falcon GL wagon / Fairmont sedan / Fairmont wagon & Fairmont Ghia sedan This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD HOT ROD COUPES

    The FORD Hot Rod Coupes novelty plate is all about Fords of 1932–1934  which were extremely popular with hot rodders. 1932 Ford De Luxe Coupe V8 - during the period after WWII, Model Bs and 18s were frequently rodded. This continued into the 1960s on a large scale, as noted in the hit song and as the pivotal street racing car in the film "American Graffiti". Today, the roadster and coupe are the most sought after body styles, as these were popular for street rods and hotrods; unmodified examples have become rare. Since the 1970s, 1932 bodies and frames have been reproduced either in fiberglass or lately in steel, which has helped resolve sheetmetal shortages, and increased the number of rods being created or restored. These are often very expensive, and a typical show-quality car may sell for $60,000 or more. Deuce coupe is a slang term used to refer to the 1932 Ford coupe, derived from the year of manufacture. In the 1940s, the '32 Ford became an ideal hot rod. Rodders would strip weight off this readily available car and hop up the engine. They came in two body styles, the more common 5-window and rarer suicide door 3-window. After World War II, the iconic stature of the 1932-vintage Ford in hot rodding inspired The Beach Boys to not only write a song entitled "Little Deuce Coupe" in 1963, but also had one of their albums named for the car, from the aforementioned song. The "little deuce coupe" that appeared on the cover to the Beach Boys' album Little Deuce Coupe (1963) was supplied by Hot Rod magazine, and features the body (with his head cropped in the photo) of hod-rod owner Clarence 'Chili' Catallo and his own customized three-window 1932 Ford Coupe - known amongst hot rod enthusiasts as "the lil' deuce coupe". This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD F750 TIPPER

    The FORD F750 TIPPER novelty plate is popular with the Aussie truck enthusiast. The first F-Series truck was known as the Ford Bonus-Built, introduced in 1948, replacing the company's previous car-based pickup line. It was a modern-looking truck with a flat, one-piece windshield and integrated headlights. Design of the F-Series truck changed little from 1948 to 1952. From 1948 to 1950, the grill was a series of horizontal bars and the headlights were set into the fenders. For 1951 and 1952, the headlights were connected by a wide aerodynamic cross piece with three similarly aerodynamic supports. The rear window was wider in the later trucks and the dashboard was redesigned. F-series trucks were built at sixteen different Ford plants. Serial numbers indicate the truck model, engine, year, assembly plant, and unit number. The most common model was the F-1 with a 6 ½-foot bed followed by the F-2 and F-3 Express models with an 8-foot (2.4 m) bed. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD ESCORT X 2

    The FORD  ESCORT X 2. The Ford Escort was the successor to the Ford Anglia, manufactured by Ford Europe from 1968 to 2004. The Ford Escort name was also applied to several different small cars produced in North America by Ford between 1981 and 2003. In 2014, Ford revived the Escort name for a car based on the second-generation Ford Focus sold on the Chinese market. The Mk2 Escort was assembled at Ford Australia's Homebush Plant, Sydney from 1975 to 1980 in 2-door and 4-door sedan, and 2-door panel van forms – the estate versions were unavailable to the Australian market. The sedan models were available in L, XL (later renamed GL) and Ghia forms, and a Sport pack option – similar to the 1300 and 1600 Sport models sold elsewhere. Unlike other markets – likely due to the estate's absence – the van was offered in a higher level of trim – a GL, and a Sport pack van was also available. Unusual fitments for the range not offered elsewhere on the Australian Escort included 'dog-dish' steel hubcaps, and high-backed front seats. In 1978, Ford Australia standardised the use of the blue oval logo across the Escort model range. These Escort models are identified by the familiar blue Ford oval in the centre of the grille and on the bootlid. While offered in many model forms, the Escort, like the Cortina, was not popular on the Australian market, largely due to expanding competition from Japanese imports and the established preference of Australian drivers for larger six-cylinder vehicles. Australian Escort production ceased in late 1980, with 79,142 examples of the Mk II produced, the range being replaced by FWD derivatives of the Mazda 323/Familia, namely the Ford Laser 3-door and 5-door hatchback and the Meteor 4-door sedan. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BRITISH PANDA CARS

    The BRITISH PANDA CARS novelty number plate is about the British police cars painted with large panels of light blue and white. In Britain, they were never painted black and white, so "panda" appears to reference the similarly patterned black and white American cars seen in Britain on television. The first use of panda cars seems to have been in Lancashire Constabulary area in about 1965, the chief constable described the use of blue and white Ford Anglia panda cars in Kirkby in an article in The Times on 26 January 1966. These were blue with a white line painted around them. In 1967, the Dunbartonshire force bought two Hillman Imps (subsequently nicknamed Pinky and Perky) for escort duties on the A82 road; one blue and one white. The boot lids, bonnets, and doors were then swapped to create a panda car style scheme. In the 1980s, police cars in the United Kingdom began to be ordered in white to save acquisition costs, usually with orange or red "jam sandwich" reflective stripes. Today, patrol cars use Battenburg markings or stripes, although many forces still use a mainly white colour scheme. The name panda car or panda is still sometimes used. In many areas, the panda car replaced the traditional "bobby on the beat", when it was seen that larger suburban or rural areas could be more effectively patrolled by officers in cars, as opposed to on foot, bicycles, or motorcycles. The provision of shelter from the weather and a two-way radio were also benefits. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD ANGLIA X 2

    The FORD ANGLIA X 2. The Ford Anglia is a car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. A total of 1,594,486 Anglias were produced. It was replaced by the Ford Escort. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD ZEPHYR X 2

    The FORD ZEPHYR X 2. The Zephyr was manufactured by Ford of Britain. Between 1951 and 1962 it was sold as a more powerful six-cylinder model to complement the four-cylinder Ford Consul. From 1962 to 1972 the Zephyr itself was offered in both four- and six-cylinder versions, the Consul having been dropped. The Zephyr, and its luxury variants, the Ford Zodiac and Ford Executive, were the largest passenger cars in the British Ford range from 1951 until their replacement by the Consul and Granada models in 1972. In Australia, the Mark II Consul, Zephyr and Zodiac were built at Ford Australia's factory in Geelong. Sedan, coupe utility, and station wagon versions were produced. The Australian-developed Mark II Station Wagon differed from its English Estate Car counterpart in having a wind-up rear window, and a straight C pillar, rather than a curved one. A handful of Station Wagons were registered in 1958, but sales did not really commence until about halfway through 1959. Mark II manufacture continued until 1962, in which year production switched to the assembly of Mark IIIs from imported completely knocked-down (CKD) kits. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD ZEPHYR X 3

    The FORD ZEPHYR X 3. The Zephyr was manufactured by Ford of Britain. Between 1951 and 1962 it was sold as a more powerful six-cylinder model to complement the four-cylinder Ford Consul. From 1962 to 1972 the Zephyr itself was offered in both four- and six-cylinder versions, the Consul having been dropped. The Zephyr, and its luxury variants, the Ford Zodiac and Ford Executive, were the largest passenger cars in the British Ford range from 1951 until their replacement by the Consul and Granada models in 1972. In Australia, the Mark II Consul, Zephyr and Zodiac were built at Ford Australia's factory in Geelong. Sedan, coupe utility, and station wagon versions were produced. The Australian-developed Mark II Station Wagon differed from its English Estate Car counterpart in having a wind-up rear window, and a straight C pillar, rather than a curved one. A handful of Station Wagons were registered in 1958, but sales did not really commence until about halfway through 1959. Mark II manufacture continued until 1962, in which year production switched to the assembly of Mark IIIs from imported completely knocked-down (CKD) kits. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • FORD FARMING POWER

    This FORD FARMING POWER sign features the Ford N-Series tractor, a series of farm tractors that were produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models. The 9N was the first American-made production-model tractor to incorporate Harry Ferguson's three-point hitch system, a design still used on most modern tractors today. It was released in October 1939. The 2N, introduced in 1942, was the 9N with some improved details. The 8N, which debuted in July 1947, was a largely new machine featuring more power and an improved transmission. It proved to be the most popular farm tractor of all time in North America. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each FORD FARMING POWER is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • FORD FARMING MODEL 8N

    This FORD FARMING MODEL 8N sign features the Ford N-Series tractor, a series of farm tractors that were produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models. The 9N was the first American-made production-model tractor to incorporate Harry Ferguson's three-point hitch system, a design still used on most modern tractors today. It was released in October 1939. The 2N, introduced in 1942, was the 9N with some improved details. The 8N, which debuted in July 1947, was a largely new machine featuring more power and an improved transmission. It proved to be the most popular farm tractor of all time in North America. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each FORD FARMING MODEL 8N is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • FORD HISTORIC LOGO

    This FORD HISTORIC LOGO sign has the first FORD logo from 1903 - Ford is one of the largest automobile manufacturers of the world. It has been in running for over 100 years now, and is still making its mark all over the world. It constantly thrives to make the best automated vehicles. Ford Motor Company manufactures unique designs and their cars are known to be the best quality available in the market. The company has garnered millions of loyal fans and customers. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each FORD HISTORIC LOGO is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • FORD V8 75TH ANNIVERSARY

    FORD V8 75TH ANNIVERSARY - Ford introduced the Flathead V8 in their affordable 1932 Model 18, becoming a performance leader for decades. In the 1950s, Ford introduced a three-tier approach to engines, with small, mid-sized, and larger engines aimed at different markets. All of Ford's mainstream V8 engines were replaced by the overhead cam Modular family in the 1990s and the company introduced a new large architecture, the Boss family, for 2010. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each FORD V8 75TH ANNIVERSARY is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

Showing 1 - 12 of 75 products in this Category