USA AUTO THEMES

In 1925 an executive from General Motors named Walter Chrysler founded his own car company. Three years later, after he bought Fargo truck company and the Dodge Brothers Company, the Automotive Daily News coined the term “the Big Three” to describe the dominant troika that Chrysler formed with GM and Ford (which has its own section on this website). Chrysler that same year also established the Plymouth and DeSoto brands, but in the 1970s a number of factors including the 1973 oil crisis impacted Chrysler’s sales, and by the late 1970s, Chrysler was on the verge of bankruptcy. Lee Iacocca was brought in as CEO and is credited with returning the company to profitability in the 1980s.
(Note – if you like to read about him get hold of a copy of “Where have all the Leaders Gone” – its good stuff). In 1987, Chrysler acquired American Motors Corporation, which brought the profitable Jeep brand under the Chrysler umbrella. Then in 1998 Chrysler merged with German automaker Daimler-Benz AG to form DaimlerChrysler. Nowadays after a government bail out following the GFC, Chrysler still sells vehicles worldwide under its flagship Chrysler brand, as well as the Dodge, Jeep, and Ram brands. It also manufactures vehicles sold under the Fiat brand in North America. Other major divisions of Chrysler include Mopar and SRT.

General Motors started in 1908 as a holding company for Buick. It acquired Oldsmobile then Cadillac, Elmore, Oakland and the Reliance and Rapid Companies, the predecessors of GMC Truck. Then the Chevrolet Motor Car Company came into the mix.
In the early 1980s GM employed 349,000 workers and operated 150 assembly plants, and GM led global sales for 77 consecutive years from 1931 through 2007, longer than any other automaker. In 2008/9/10, GM has ranked as the 2nd largest global automaker. Along the way, following the GFC of 2008, a failure to obtain government loans caused GM to file for Chapter 11 bankruptcy in 2009. The company then shed several brands, closing Saturn and Pontiac, and emerged from Chapter 11 and back to profitability in 2010.

Today GM produced cars and trucks in 37 countries through the following brands: Chevrolet, Buick, GMC, Cadillac, Baojun, Holden, Isuzu, Jie Fang, Opel, Vauxhall, and Wuling.

  • CAT

    CAT comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition CAT is an abbreviation, trademark and stock exchange code of Caterpillar Inc; an American corporation which designs, develops, engineers, manufactures, markets and sells machinery, engines, financial products and insurance to customers via a worldwide dealer network. Caterpillar is a leading manufacturer of construction and mining equipment, diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. With more than US$89 billion in assets, Caterpillar was ranked number one in its industry and number 44 overall in the 2009 Fortune 500. In 2016 Caterpillar was ranked #59 on the Fortune 500 list and #194 on the Global Fortune 500 list. Caterpillar stock is a component of the Dow Jones Industrial Average. Caterpillar Inc. traces its origins to the 1925 merger of the Holt Manufacturing Company and the C. L. Best Tractor Company, creating a new entity, the California-based Caterpillar Tractor Company. In 1986, the company re-organized itself as a Delaware corporation under the current name, Caterpillar Inc. Caterpillar's headquarters are located in Peoria, Illinois; it announced in January 2017 that over the course of that year it would relocate its headquarters to Chicago. The company also licenses and markets a line of clothing and workwear boots under its Cat / Caterpillar name. Caterpillar machinery is recognizable by its trademark "Caterpillar Yellow" livery and the "CAT" logo This is a CAT Licensed merchandise product used under licence to Plasticolor. Bar code: 04592902027 2 If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • IT’S A JEEP THING

    IT'S A JEEP THING comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition Jeep is a brand of American automobiles that is a division of FCA US LLC (formerly Chrysler Group, LLC), a wholly owned subsidiary of Fiat Chrysler Automobiles. The former Chrysler Corporation acquired the Jeep brand, along with the remaining assets of its owner American Motors, in 1987. The division is headquartered in Toledo, Ohio. Jeep's current product range consists solely of sport utility vehicles and off-road vehicles, but has also included pickup trucks in the past. The original Jeep was the prototype Bantam BRC. Willys MB Jeeps went into production in 1941 specifically for the military, arguably making them the oldest four-wheel drive mass-production vehicles now known as SUVs. The Jeep became the primary light 4-wheel-drive vehicle of the United States Army and the Allies during World War II, as well as the postwar period. The term became common worldwide in the wake of the war. With its spartan, cramped, and unstintingly functional jeep became the ubiquitous World War II four-wheeled personification of Yankee ingenuity and cocky, can-do determination. The first civilian models were produced in 1945. It inspired a number of other light utility vehicles, such as the Land Rover. Many Jeep variants serving similar military and civilian roles have since been designed in other nations. This is a Chrysler Group copyright and official Licensed product LLC2011 used under licence to Chroma (a Pasticolor company) Barcode 045929 02022 7 If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CORVETTE AMERICAS ONLY

    The CORVETTE AMERICAS ONLY  Tin sign is one of several Chevrolet signs we have. The Chevrolet Corvette featured is a 1958 model.  The Chevrolet Corvette (C1) is the first generation of the Corvette sports car produced by Chevrolet. It was introduced late in the 1953 model year, and produced through 1962. It is commonly referred to as the "solid-axle" generation, as the independent rear suspension did not appear until the 1963 Sting Ray. The Corvette was rushed into production for its debut model year to capitalize on the enthusiastic public reaction to the concept vehicle, but expectations for the new model were largely unfulfilled. Reviews were mixed and sales fell far short of expectations through the car's early years. The program was nearly canceled, but Chevrolet would ultimately stay the course. 1958–1960 models: 1958 Corvette Convertible: In an era of chrome and four headlamps, the Corvette succumbed to the look of the day. The 1958 model year and the four that followed all had the exposed four-headlamp treatment and prominent grills, but a faux-louvered hood and chrome trunk spears were unique to 1958. The interior and instruments were updated, including placing a tachometer directly in front of the driver. For the 1958 model, an 8000 rpm tachometer was used with the 270 hp (200 kW) and 290 hp engines, rather than the 6000 rpm units used in the lower horespower engines. Optional engine choices included two with twin carburetors (including a 270 hp model with Carter 2613S and 2614S WCFB four-barrels) and two with fuel injection. Power output for the highest rated fuel-injected engine was 290 hp. Displacement remained 283 cid. For the first time, seat belts were factory-installed rather than being dealer-installed as on previous models. Rare options were RPO 684 heavy-duty brakes and suspension (144), RPO 579 250 hp engine (554), RPO 276 15"×5.5" wheels (404). Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2005 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed (to Dixie Souvenirs) by Desperate Enterprises.  UPC 605279107209 ICC DES 12 8 11. It is a GM official licensed product - Hologram code: 99L1235 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • 1957 CADILLAC DAGMARS

    The 1957 CADILLAC DAGMARS Tin sign is one of several Cadillac signs we stock. Dagmar refers to the car's bumpers - it's a slang term for chrome conical shaped styling elements which began to appear on the front bumper/grille assemblies of certain American automobiles following World War II. They reached their peak in the mid-1950s. The term is derived from the notable physical attributes of Dagmar, a buxom early 1950s television personality known for low-cut gowns and pronounced conical bra cups. She was amused by the tribute. She used the stage name Dagmar (born Virginia Ruth Egnor, November 29, 1921 – October 9, 2001) and was an American actress, model, and television personality of the 1950s. As a statuesque, busty blonde, she became one of the first major female stars of television, receiving much press coverage during that decade. The bottom script of the sign reads - The 1957 Cadillac struts "Dagmars". Virginia Rush Egnor was a busty blonde who went by the name Dagmar on NBC's 1950 Late-night talk show 'Broadway Open House'. During the same period, Cadillacs began sprouting a pair of protrusions from their front bumpers and since the cars had long been connected to celebrities, the comparison of the bumper feature and Dagmar's chest was a natural Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by General Motors used under licensing to Sign Of The Times - No UPC provided BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DODGE CHARGER

    DODGE CHARGER - the GENERAL LEE 1969 DODGE CHARGER novelty number plate was the name given to a 1969 Dodge Charger driven by the Duke cousins Bo and Luke; along with cousins Coy and Vance in the television series The Dukes of Hazzard. It is known for its signature horn, its police chases, stunts — especially its long jumps — and for having its doors welded shut, leaving the Dukes to climb in and out through the windows. The car's name is a reference to American Civil War general Robert E. Lee. It bears a Confederate flag (a rectangular variant of the square battle flag of Lee's Army of Northern Virginia) on its roof, and also has a horn which plays the first twelve notes of the song "Dixie". Our DODGE CHARGER comes standard as flat and non-embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate or sign to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEVY POWER SINCE 1911

    The CHEVY POWER SINCE 1911 Tin sign features Chevrolet, colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121991  ICCD12811. It is a GM official licensed product ref 99A1838 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEVROLET TRUCKS

    The CHEVROLET TRUCKS Tin sign features Chevrolet, colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2017 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279121977  ICCD12811. It is a GM official licensed product ref 99A1835 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GENUINE CHEVROLET SILVER BOWTIE ON BLACK

    GENUINE CHEVROLET SILVER BOWTIE ON BLACK plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. GM Trademarks used under licence to 49X95 - GM barcode 99A0023 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEVROLET POWER

    CHEVROLET POWER plate comes standard as lightly embossed and made from high quality aluminium. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced GM Trademarks under license to 49X95   7N9S9UR3- GM barcode C21031 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CHEV Gold Logo Checkerplate

    The CHEV Gold Logo Checkerplate plate comes standard as flat non embossed and made from high quality tin. Artwork is applied by a dye sublimation process with a lovely gloss finish. They measure 30 x 15 cm, exactly the same as other US made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. Official Licenced GM Trademarks used under license to Racing Reflections Inc  Barcode 75806000785 For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CORVETTE STINGRAY C3

    The CORVETTE STINGRAY C3 novelty plate shows the third generation Chevrolet Corvette C3 Stingray - a sports car that was produced by Chevrolet for the 1968 through 1982 model years. Engines and chassis components were mostly carried over from the previous generation, but the body and interior were new. It set new sales records with 53,807 produced for the 1979 model year. The C3 is the third generation of the Chevrolet Corvette, while the 1969 through 1976 models mark the second generation of the Corvette Stingray. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CAMARO SS

    The CAMARO SS novelty plate shows the first generation Chevrolet Camaro that appeared in Chevrolet dealerships in September 1966, for the 1967 model year on a brand-new rear-wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible with a choice of six-cylinder and V8 power plants. The first-generation Camaro was built through the 1969 model year. The Camaro's standard drive train was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) or a 327 cu in (5.4 L) (307 cu in (5.0 L) later in 1969) V8 engine, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS396 cars was the Turbo 400 three-speed automatic. There was a plethora of other options available all three years, including three main packages: The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model. The SS performance package consisted of a 350 or 396 cu in V8 engine and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging. The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am series. It included a solid-lifter 302 V8, 4-speed transmission, power disc brakes, and two wide stripes down the hood and trunk lid. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • USA SIZE PLATE – PERSONALISED CUSTOM MADE

    A USA SIZE PLATE - PERSONALISED CUSTOM MADE is a way of personalising your own US Sized Novelty Plate - these embossed plates can be done as "One Offs" or in large numbers and production turnaround is on a weekly cycle. USA Size plate (30.5cm x 15.5cm) without mounting holes. (Sorry but no holes in the first batch of 50 but next batch will have holes) Can have one line of embossed characters in a choice of three different heights Large (L) = 80mm / Medium (M) =60mm and Small (S) =50mm. If 'L' or ‘M’ chosen no more than 6 characters including one space. If ‘S’ is chosen no more than 9 characters including one space. The embossed characters are normally placed central on the plate but can be bottom justified but not top justified In addition to diamonds, dashes, dot/fullstops, we now have even more punctuation options on characters that can be embossed as shown on an attached image. The new characters are: a proper number one with a serif - 1 a hash tag - # apostrophe – ‘ and symbol - & at symbol - @ USA size plates are available in the following background colours: White, Black. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon By law we must avoid character combinations that are similar to state issued licenced or personalised registration plates and in general this includes avoiding the following Alpha Numeric combinations:  AAA NN / AA NNN / AAA NNN / NNN AAA / NNN AA  / AA NN AA  / NAAANNN. For bona fide car collectors and exhibitors we can get around this if our customer provides a signed statement of intentional use. There is a Colour chart posted on this website at http://dixiesouvenirs.com/shop/colour-chart-for-aussie-custom-plates/ or there is an icon to click on in the linked products below

  • PONTIAC SERVICE

    The PONTIAC SERVICE circular sign features Pontiac which was a brand of automobiles manufactured and sold by General Motors (GM); though production ended in 2010, Pontiac remains a registered and active trademark of GM. The Pontiac automobile brand was established in 1926 as a companion make for GM's more expensive line of Oakland automobiles. The Pontiac cars overtook its Oakland parent in popularity and supplanted the Oakland brand entirely by 1933. Pontiac became a companion make for Chevrolet. Pontiac was sold in the United States, Canada, and Mexico by GM. Pontiac was advertised as the performance division of General Motors for many years, while specializing in mainstream vehicles. Pontiac was relatively more popular in Canada, where for much of its history it was marketed as a low-priced vehicle. In late 2008 and early 2009, amid financial problems and restructuring efforts, GM announced it would discontinue manufacturing and marketing vehicles under the Pontiac brand by the end of 2010 and focus on four core brands in North America: Chevrolet, Buick, Cadillac, and GMC. The last Pontiac badged cars were built in December 2009, with one final vehicle built in January, 2010. Franchise agreements for Pontiac dealers expired October 31, 2010. This is a flat non-embossed sign measuring 12ins (30cm) diameter and is made from durable and long lasting high quality tin which can be hung inside or outside. Each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! Novelty signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. For protection from factory to customer each PONTIAC SERVICE circle sign is supplied in shrink wrap and is freighted with extra packing materials to ensure they arrive in tip-top condition and ready for hanging on display in store.

  • CHEVROLET BELAIR 50TH

    The CHEVROLET BELAIR 50TH Tin sign is one of several we have in Chevy classics. The Chevrolet Bel Air was a full-size automobile that was produced by Chevrolet (a division of General Motors) from 1950–1981. This sign was made in celebration of the Belairs 50th anniversary in 2007, and depicts the 2nd generation (1955–1957) car which superceded 1st generation with all new styling and power. It was first called the "Hot One" in GM's advertising campaign. The 1956 Bel Air received a face-lift with a more conventional full-width grille, pleasing those customers who didn't favor the Ferrari-inspired '55 front end. Distinctive two-tone bodyside treatments and graceful front and rear wheel openings completed the "speedline" restyling. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2006 by General Motors (barcode: 99A1692) under licensing to Desperate Enterprises UPC 605279113958 ICCDES12811. BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • SHELL MOTOR OIL CAN

    The SHELL MOTOR OIL CAN Tin sign is one of several we have in motor oils. Wikipedia tells us Shell Oil Company is the United States-based subsidiary of Royal Dutch Shell, a multinational "oil major" of Anglo-Dutch origins, which is amongst the largest oil companies in the world. Approximately 22,000 Shell employees are based in the U.S. The U.S. head office is in Houston, Texas. Shell Oil Company, including its consolidated companies and its share in equity companies, is one of America's largest oil and natural gas producers, natural gas marketers, gasoline marketers and petrochemical manufacturers. Shell is the market leader through approximately 25,000 Shell-branded gas stations in the U.S. which also serve as Shell's most visible public presence. Shell Oil Company is a 50/50 partner with the Saudi Arabian government-owned oil company Saudi Aramco in Motiva Enterprises, a refining and marketing joint venture which owns and operates three oil refineries on the Gulf Coast of the United States. The Shell Oil Company Warehouse, built in 1925 and located at 425 S. N. 16th Ave. Phoenix, Arizona. It is listed in the National Register of Historic Places. Shell products include oils, fuels, and car services as well as exploration, production, and refining of petroleum products. The Shell Oil Refinery in Martinez, California, the first Shell refinery in the United States, supplies Shell and Texaco stations in the West and Midwest. Shell gasolines previously included the RU2000 and SU2000 lines (later there was a SU2000E) but they have been superseded by the V-Power line. In 1997, Shell and Texaco entered into two refining/marketing joint ventures. One combined their Midwestern and Western operations and was known as Equilon. The other, known as Motiva, combined the Eastern and Gulf Coast operations of Shell Oil and Star Enterprise, itself a joint venture between Saudi Aramco and Texaco. After Texaco merged with Chevron in 2001, Shell purchased Texaco's shares in the joint ventures. In 2002, Shell began converting these Texaco stations to the Shell brand, a process that was to be completed by June 2004 and was called "the largest retail re-branding initiative in American business history.". In the year 2016, Shell Nederland Raffinaderij BV (Shell Pernis) said that it has started a new aromatics unit at the large Pernis refinery in Rotterdam, the Netherlands. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each SHELL MOTOR OIL CAN sign is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • CHEVY AVENUE

    Our CHEVY AVENUE is a Euro Size plate (52cm x 11cm) without mounting holes. Soon to be available with mounting holes. Stock colour is silver on Black background Dixie’s Aluminium Aussie plates are are extremely high quality and Australian manufactured with embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • INTERCEPTORS

    The INTERCEPTORS novelty plate is all about the specially built pursuit cars or "Interceptors", made famous as iconic muscle cars in the movies This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • BEACH WOODY

    Our BEACH WOODY is all about the legendary "woodie" - a car body style with rear bodywork constructed of wood framework with infill wood panels. Originally, wood framework augmented the car's structure, where later models featured applied wood and wood-like elements. Ultimately, manufacturers supplanted wood construction with a variety of materials and methods to recall wood construction — including infill metal panels, metal framework, or simulated wood-grain sheet vinyl, sometimes augmented with three-dimensional, simulated framework. In 2008, wood construction was evoked abstractly on the Ford Flex with a series of side and rear horizontal grooves.  This is a Scott Westmoreland artwork, carrying his signature. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright by Scott Westmoreland and used under licensing from Sagebrush Fine Art to Desperate Enterprises UPC 605279111244  ICCD12811 who supply Dixie BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HIGHWAY TO HELL

    HIGHWAY TO HELL. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each HIGHWAY TO HELL is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • CHEVY V8 Black on Silver

    The CHEVY V8 Black on Silver novelty number plate is popular with Chevrolet enthusiasts It's a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that's been producing and selling quality number plates for years. The CHEVY V8 Black on Silver sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable. YOU MAY ALSO LIKE…

  • HOT ROD GARAGE ORANGE RAT ROD

    HOT ROD GARAGE ORANGE RAT ROD. Hot rods are typically old, classic American cars with large engines modified for linear speed. The origin of the term "hot rod" is unclear. A possible origin includes replacement of the camshaft with a new ("hotter") version, sometimes known as a hot stick or hot rod. Roadsters were the cars of choice because they were light, easy to modify, and available inexpensively. The term became commonplace in the 1930s or 1940s as the name of a car that had been "hopped up" by modifying the engine in various ways to achieve higher performance. A term that was common in the early days to refer to a hot rod was a "gow job". This has fallen into total disuse except with historians. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each HOT ROD GARAGE ORANGE RAT ROD is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • HOT ROD GARAGE GREY ROD

    HOT ROD GARAGE GREY ROD. Hot rods are typically old, classic American cars with large engines modified for linear speed. The origin of the term "hot rod" is unclear. A possible origin includes replacement of the camshaft with a new ("hotter") version, sometimes known as a hot stick or hot rod. Roadsters were the cars of choice because they were light, easy to modify, and available inexpensively. The term became commonplace in the 1930s or 1940s as the name of a car that had been "hopped up" by modifying the engine in various ways to achieve higher performance. A term that was common in the early days to refer to a hot rod was a "gow job". This has fallen into total disuse except with historians. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each HOT ROD GARAGE GREY ROD is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • CORVETTE 1968 STINGRAY 427

    CORVETTE 1968 STINGRAY 427. The Chevrolet Corvette C2, also known as the Corvette Sting Ray, is a sports car that was produced by Chevrolet for the 1963 to 1967 model years. The 427 was available with a Holley triple two-barrel carburetor arrangement, which the factory called Tri-Power. The ultimate Corvette engine for 1967 was coded L88, even wilder than the L89, and was as close to a pure racing engine as Chevy had ever offered in regular production. Besides the lightweight heads and bigger ports, it came with an even hotter camshaft, stratospheric 12.5:1 compression, an aluminum radiator, small-diameter flywheel, and a single huge Holley four-barrel carburetor. Although the factory advertised L88 rating was 430 bhp at 4600 rpm, the true rating was said to be about 560 bhp at 6400 rpm. The very high compression ratio required 103-octane racing fuel, which was available only at select service stations. Clearly this was not an engine for the casual motorist. When the L88 was ordered, Chevy made several individual options mandatory, including Positraction, the transistorized ignition, heavy-duty suspension, and power brakes, as well as RPO C48, which deleted the normal radio and heater to cut down on weight and discourage the car's use on the street. As costly as it was powerful - at an additional $1,500 over the base $4,240.75 price - the L88 engine and required options were sold to a mere 20 buyers that year. With potential buyers anticipating the car's overdue redesign, sales for the Stingray's final year totaled 22,940, down over 5,000 units from 1966 results. Meanwhile, Chevrolet readied its third-generation Corvette for the 1968 model year. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12.5 x 16 ins (32 x 40cm) and made from durable and long lasting high quality tin they can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is copyright 2005 General Motors under license to Desperate Enterprises Inc - Manufactured & Distributed (to Dixie Souvenirs) by Desperate Enterprises.  UPC 605279121014 ICC DES 12 8 11. It is a GM official licensed product - Hologram code: 99A1689 BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • GENERAL LEE 1969 CHARGER

    The GENERAL LEE 1969 CHARGER novelty number plate was the name given to a 1969 Dodge Charger driven by the Duke cousins Bo and Luke; along with cousins Coy and Vance in the television series The Dukes of Hazzard. It is known for its signature horn, its police chases, stunts — especially its long jumps — and for having its doors welded shut, leaving the Dukes to climb in and out through the windows. The car's name is a reference to American Civil War general Robert E. Lee. It bears a Confederate flag (a rectangular variant of the square battle flag of Lee's Army of Northern Virginia) on its roof, and also has a horn which plays the first twelve notes of the song "Dixie". This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • AC SHELBY COBRA

    AC SHELBY COBRA is sold as the Shelby AC Cobra and Shelby Cobra in the United States and often known colloquially as the Shelby Cobra in that country, is a British sports car with an American Ford V8, produced intermittently in both the US and UK since 1962. This plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • SHELBY COBRA 50TH

    Our SHELBY COBRA 50TH is all about the legendary AC Cobra. The AC Cobra, sold as the Shelby AC Cobra and Shelby Cobra in the United States and often known colloquially as the Shelby Cobra in that country, is a Hy-brid - a British sports car with an American Ford V8, produced intermittently in both the US and UK since 1962. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each SHELBY COBRA 50TH is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • THIS CAN CONTAINS

    Our THIS CAN CONTAINS YOUR CAR'S LIFE INSURANCE is all about the legendary SHELL OIL. Shell Oil Company is the United States-based subsidiary of Royal Dutch Shell, a multinational “oil major” of Anglo–Dutch origins, which is amongst the largest oil companies in the world. Approximately 22,000 Shell employees are based in the U.S. The U.S. head office is in Houston, Texas. Shell Oil Company, including its consolidated companies and its share in equity companies, is one of America’s largest oil and natural gas producers, natural gas marketers, gasoline marketers and petrochemical manufacturers. Shell is the market leader through approximately 25,000 Shell-branded gas stations in the U.S. which also serve as Shell’s most visible public presence. Shell Oil Company is a 50/50 partner with the Saudi Arabian government-owned oil company Saudi Aramco in Motiva Enterprises, a refining and marketing joint venture which owns and operates three oil refineries on the Gulf Coast of the United States. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! The design on this sign is under license with TSBA AG an official licensee of Shell Brands International - Manufactured & Distributed to Dixie Souvenirs by Desperate Enterprises UPC 605279120888  ICCD12811. BONUS! – Each sign is supplied in a free clear plastic pocket ready for display in store. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs of various shape made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • THE WORLDS FASTEST MOTORCYCLE OIL

    Our THE WORLDS FASTEST MOTORCYCLE OIL is all about the legendary SHELL OIL. Shell Oil Company is the United States-based subsidiary of Royal Dutch Shell, a multinational “oil major” of Anglo–Dutch origins, which is amongst the largest oil companies in the world. Approximately 22,000 Shell employees are based in the U.S. The U.S. head office is in Houston, Texas. Shell Oil Company, including its consolidated companies and its share in equity companies, is one of America’s largest oil and natural gas producers, natural gas marketers, gasoline marketers and petrochemical manufacturers. Shell is the market leader through approximately 25,000 Shell-branded gas stations in the U.S. which also serve as Shell’s most visible public presence. Shell Oil Company is a 50/50 partner with the Saudi Arabian government-owned oil company Saudi Aramco in Motiva Enterprises, a refining and marketing joint venture which owns and operates three oil refineries on the Gulf Coast of the United States. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each THE WORLDS FASTEST MOTORCYCLE OIL is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • TUFF CHEVY

    TUFF CHEVY refers to the Chevys of the 1950's era - Chevrolet Belairs; 1956 Chevrolets, 1957 Cadillacs, 1958 Plymouth - all with a big bit of grunt . This novelty plate is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured.  The TUFF CHEVY sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

  • THIS IS AN IH FARM

    Our THIS IS AN IH FARM is all about the legendary best selling INTERNATIONAL trucks. The International Harvester Company (abbreviated first IHC and later IH) was a U.S. manufacturer of agricultural machinery, construction equipment, trucks, and household and commercial products. In 1902, J.P. Morgan merged the McCormick Harvesting Machine Company and Deering Harvester Company, along with three smaller agricultural equipment firms, to form International Harvester. In 1985, International Harvester sold off most of its agricultural division to Tenneco, Inc., who merged it into its subsidiary J.I. Case under the Case IH brand. Following the terms of IH's agreement with Tenneco, International Harvester renamed itself Navistar International Corporation in 1986. Navistar owns the manufacturer of International brand commercial trucks, MaxxForce brand diesel engines, IC Bus school and commercial buses, Workhorse brand chassis for motor homes and step vans, and is a private label designer and manufacturer of diesel engines for the pickup truck, van, hoes and SUV markets. The company is also a provider of truck and diesel engine parts and service. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each THIS IS AN IH FARM is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition

  • INTERNATIONAL TRUCK LOGO

    Our INTERNATIONAL TRUCK LOGO is all about the legendary best selling trucks. The International Harvester Company (abbreviated first IHC and later IH) was a U.S. manufacturer of agricultural machinery, construction equipment, trucks, and household and commercial products. In 1902, J.P. Morgan merged the McCormick Harvesting Machine Company and Deering Harvester Company, along with three smaller agricultural equipment firms, to form International Harvester. In 1985, International Harvester sold off most of its agricultural division to Tenneco, Inc., who merged it into its subsidiary J.I. Case under the Case IH brand. Following the terms of IH's agreement with Tenneco, International Harvester renamed itself Navistar International Corporation in 1986. Navistar owns the manufacturer of International brand commercial trucks, MaxxForce brand diesel engines, IC Bus school and commercial buses, Workhorse brand chassis for motor homes and step vans, and is a private label designer and manufacturer of diesel engines for the pickup truck, van, hoes and SUV markets. The company is also a provider of truck and diesel engine parts and service. Novelty Tin signs are great for adding a touch of fun or nostalgia and there are heaps of them available with everything from Classic Muscle cars to Hollywood legends. Not only something with shed, games room or kitchen value these vintage signs have flair and decoration potential and a sort of artistic beauty that adds charisma and character to the place they are displayed. BONUS! – Each INTERNATIONAL TRUCK LOGO is supplied in a free clear plastic pocket ready for hanging on display in store. Measuring 12 x 15 ins (30 x 38cm) and made from durable and long lasting high quality tin. They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is freighted with extra packing materials to ensure they arrive in tip-top condition