AUS EMBOSSED NOVELTY NUMBER PLATES

  • HOLDEN EK SEDAN

    Our HOLDEN EK SEDAN is of course the iconic Holden. The Holden EK was an automobile produced by General Motors-Holden's in Australia from 1961 to 1962. Introduced on 2 May 1961, the EK series was a facelifted version of the Holden FB, which it replaced. The EK, the first new Holden released in the 1960s, was a minor face-lift of the superseded FB series, with obvious changes limited to a new grille of eight vertical bars (instead of six), and body side mouldings. In terms of finish, "Standard" vehicles were painted in a single colour with no additional trimming or fittings, while "Special", the most popular model, came with stainless steel trims along the side and a white roof, as well as chrome Special badges, and two-tone vinyl interiors. Parking lights were incorporated into the top grille bar, and other changes included new exterior badges, a revised interior trim, electric wipers (replacing the old vacuum type ones), and a new fresh-air unit with a new ventilation air intake located forward of the windscreen. The only significant mechanical change from the FB was the introduction of the first automatic transmission to be offered on a Holden. Marketed as the Hydra-Matic, it was a well-regarded three-speed unit which was fully imported from the United States. It was only offered as an option on the Holden Special models. Other options included more than 30 approved NASCO Accessories, such as a bonnet lock, a locking tank cap, a car heater, external rear-view mirrors, or a sunshade. Visually, the two commercial vehicles, the Utility and Panel Van, remained almost identical to the previous model, the FB. In fact, the FB rear quarter panels and tail lights were carried over to the EK commercials. The carrying capacity was however increased from 8 cwt to 10 cwt by fitting upgraded springs. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN EJ SEDAN

    The HOLDEN EJ SEDAN novelty number plate refers to the Holden EJ - a motor vehicle which was produced by General Motors-Holdens in Australia from 1962 to 1963. Introduced in July 1962,the EJ replaced the Holden EK series. The styling of the EJ was a radical departure from that of the EK with a lower roof line, a flatter boot and an absence of fins. Improvements were made to the brakes, front suspension and the Hydra-matic automatic transmission. A new luxury model, the Holden Premier, made its debut in the EJ series and featured leather interior, bucket seats, metallic paint, a heater/demister with centre console and arm rests on all four doors. It was fitted with Hydra-matic 3-speed automatic transmission as standard equipment, this being optional on other EJ series models. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • HOLDEN EH SEDAN

    The HOLDEN EH SEDAN novelty number plate refers to the Holden EH automobile produced by General Motors-Holden in Australia from 1963 to 1965. The EH was released in August 1963 replacing the Holden EJ series and was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). The 179 ci (2900cc) engine was only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box, was called the "EH-S4". The 179ci engine then became available with an up-graded manual gear box, with stronger gears then the 149ci gear box. The three-speed manual (column shift) gear boxes had no synchromesh on first gear, requiring double de-clutching. The 179 ci manual also used an up-graded clutch. A total of 256,959 EH Holdens were produced and sold from 1963 to 1965, when the EH was replaced by the Holden HD series. Holden EH's were offered in the following models: Standard Sedan; Standard Station Sedan; Special Sedan; Special Station Sedan; S4 Special Sedan; Premier Sedan; Premier Station Sedan; Ute (Utility) and Panel Van. Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • ECHUCA

    Echuca is a town located on the banks of the Murray River and Campaspe River in Victoria, Australia. The border town of Moama is on the northern side of the Murray River in New South Wales. Echuca is the administrative centre and largest settlement in the Shire of Campaspe. As of the 2011 census, Echuca had a population of 13,708. Echuca, an Aboriginal name meaning "Meeting of the Waters" is indicative of the role rivers have played in the town's existence. Echuca is situated close to the junction of the Goulburn, Campaspe and Murray Rivers. Its position at the closest point of the Murray to Melbourne contributed to its development as a thriving river port city during the 19th century. This plate is currently available in three variations with just a few of the old style pressed and embossed plate remaining Thereafter the plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DUFF

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DUCATI

    Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DORA

    Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DOG HOUSE

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DOG HAZARD

    Aussie plates (37cm x 13cm) are available in a variety of colour combinationsWhat is shown here are our standard stocked items but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Aluminium number plate from the same company thats been producing and selling quality Novelty Plates for many years. Dixies plate sizes are the same as those on a normal vehicle and have embossed characters and an embossed border

  • LABRADOR RETRIEVER

    GREAT DOG LOVERS GIFT IDEA! Our Dog range of Novelty Number Plates features: Blue Heeler Dog; Collie Gog; German Shepherd; Kelpie Cattle; Kelpie Sheep and the two newest to the range are GOLDEN LABRADOR AND LABRADOR RETREIVER,Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • Kelpie Sheep Dog

    This std size 37cm x 13cm aluminium plate has embossed main characters: NSW BLUES. As a further option some have a 2nd line of subscript in 12mm high quality vinyl decal.Extremely high quality Australian manufactured by the same company thats been producing and selling quality plates for years.  

  • Kelpie Cattle Dog

    Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

  • GOLDEN RETRIEVER

    GREAT DOG LOVERS GIFT IDEA! Our Dog range of Novelty Number Plates features: Blue Heeler Dog; Collie Gog; German Shepherd; Kelpie Cattle; Kelpie Sheep and the two newest to the range are GOLDEN LABRADOR AND LABRADOR RETREIVERAussie plates (37cm x 13cm) are extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • German Shepherd

    The German Shepherd  is a breed of medium to large-sized working dog that originated in Germany. The breed's officially recognized name is German Shepherd Dog in the English language, sometimes abbreviated as GSD and was also formerly known as the Alsatian in Britain.The German Shepherd is a relatively new breed of dog, with their origin dating to 1899. As part of the Herding Group, German Shepherds are working dogs developed originally for herding sheep. Since that time however, because of their strength, intelligence, trainability, and obedience, German Shepherds around the world are often the preferred breed for many types of work, including disability assistance, search-and-rescue, police and military roles, and even acting. The German Shepherd is the 2nd most registered breed by the American Kennel Club and 3rd most registered breed in Australia There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • Border Collie

    Please note: In July 2013, the plate's image has changed from the dog sitting to the new one with the dog lying down, as shown.Extremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm). Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

  • DILLIGAF

    DILLIGAF stands for Do I Look Like I Give A F***; - popularised by Aussie comedian Kevin Bloody WilsonAvailable in a range of colours as shown on the drop down menuAussie plates (37cm x 13cm) are available in a variety of colour combinations and what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that's been producing and selling quality Novelty Plates for many years. Dixie's plate sizes are the same as those on a normal vehicle, and have embossed characters and an embossed border

  • DATSUN 240Z

    Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DATSUN

    Please select from the drop down menu. The choice of plates shown here are our standard stocked items but other colours can be manufactured at a weeks noticeAussie plates (37cm x 13cm) are extremely high quality Australian manufacture made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DATO

    Available in a variety of colour combinations Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

  • Darwin

    Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • PERSONALISED SHED PIC PLATE

    The PERSONALISED SHED PIC PLATE novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. Unfortunately this design is no longer manufactured so what we have on the shelves is the last of them - and we have at least 300 left, so why not give your man’s shed its own PERSONALISED SHED PIC PLATE at a discounted price PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • DADS GARAGE

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DADS CORNER

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DADS BAR – CLEARANCE PLATE

    This plate is discounted heavily as it has four small numerals 12; 3, 6, & 9 on it as it was made to be a clock face, (but we no longer sell clocks)  otherwise it's no difference to the normal DADS BAR novelty plate, and a deft touch of a black tester would hide the numerals.Would suit those looking for a real cheap deal for dadExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

  • DADS BAR

    One of many DADS plates and signs that we carry.Aussie plates (37cm x 13cm) are extremely high quality Australian manufacture made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

  • DAD ROCKS

    Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border 

  • PERSONALISED CUSTOM FRAMES

    Our PERSONALISED CUSTOM FRAMES fit around standard size Aussie Plates (37cm x 13cm). They are high quality injection moulded plastic in Black or in White, with your own choice of novelty wording which by and large is applied on the wider part of the frame at the bottom. However as shown in the examples here we can also apply lettering to the top of the frame, or both top and bottom. The words are cut from high quality vinyl stickers (see below for colours available) and are applied by hand. Wording for top of frame can be a maximum of 31cm long x 8mm tall, with wording for bottom of frame a maximum of 31cm long x 13mm tall. Please select your preference from the drop down menus, and if ordering from this website please include the text that you require in the comments section before finally placing the order. Production takes 2-3 days A colour and font guide is attached to this post. Attention Business Owners – do you want a mobile billboard to help promote your business – then here’s a cost effective way to get the name in front of the public as much as possible.  Dixie’s Number Plate Frames fit around all standard size Aussie Plates (37cm x 13cm) and are so easy to use - all you do is clip the frame to the number plate and your ready to go,so don’t delay get your own personalised number plate frames today. Production turnaround is a maximum 3 days. Our PERSONALISED CUSTOM FRAMES are priced individually with a minimum order of one, so it's a pretty cost effective advertising medium. Below are the fonts and colours that we most frequently use. Others are available upon request ...Please note that fonts may vary slightly from batch to batch, due to character spacing, boldness, and height

  • CUSTOM MADE PLATE WITH 1 STICKER

    The CUSTOM MADE PLATE WITH 1 STICKER is for customers wanting a custom novelty number plate with more than one line of embossed characters. We can add 1, 2 or 3 lines of text in high quality vinyl decals, as well as small clip art symbols. Great for car clubs that want their own plate with member numbers or member names,or for sponsored prizes at UTE Musters etc - see example pics of plate shown or email us for samples of others we have done. The stickers can be upto 34.5cms long, and can be done in practically any font but we use Garage Gothic as default as its a close match to the embossed characters. Sticker character heights vary from 1.2 cms upto 4.5 cms depending what size embossed characters are used and whether they are placed top,middle or bottom of the plate. Embossed characters - Large characters are 8cm tall with max 6 characters across plate, and are centrally positioned; Medium characters are 6cm tall with max 7 across plate. Small characters are 5 cm tall with max 10 across plate. Both medium and small (but not large) can be positioned at top, bottom, left or right of plate. To order, just select your choice of plate type (1,2 or 3 sticker) and then in the comments box on the order form tell us what characters you require.  Production turnaround is on a weekly cycle. It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured.  The CUSTOM MADE PLATE WITH 1 STICKER sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today!   BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition There is a colour chart at http://dixiesouvenirs.com/shop/colour-chart-for-aussie-custom-plates/ or as shown in the linked products at foot of page

  • CUSTOM MADE PLATE WITH 2 STICKER

    The CUSTOM MADE PLATE WITH 2 STICKER is for customers wanting a custom novelty number plate with more than one line of embossed characters. We can add 1, 2 or 3 lines of text in high quality vinyl decals, as well as small clip art symbols. Great for car clubs that want their own plate with member numbers or member names,or for sponsored prizes at UTE Musters etc - see example pics of plate shown or email us for samples of others we have done. The stickers can be upto 34.5cms long, and can be done in any font but we use Garage Gothic as default as its a close match to the embossed characters. Sticker character heights vary from 1.2 cms upto 4.5 cms depending what size embossed characters are used and whether they are placed top,middle or bottom of the plate. Embossed characters – Large characters are 8cm tall with max 6 characters across plate, and are centrally positioned; Medium characters are 6cm tall with max 7 across plate. Small characters are 5 cm tall with max 10 across plate. Both medium and small (but not large) can be positioned at top, bottom, left or right of plate. To order,just select your choice of plate type (1,2 or 3 sticker) - SEE LINKS BELOW - and then in the comments box on the order form tell us what characters you require.  Production turnaround is on a weekly cycle. It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The CUSTOM MADE PLATE WITH 2 STICKER sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today!   BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition There is a colour chart at http://dixiesouvenirs.com/shop/colour-chart-for-aussie-custom-plates/ or as shown in the linked products at foot of page Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • AUSSIE SIZE PERSONALISED PLATE

    An AUSSIE SIZE PERSONALISED PLATE  can be done as "One Offs" or in large numbers and production turnaround is on a weekly cycle. AUSSIE SIZE PLATE PERSONALISED plates are available in the following sizes: (1) Aussie Standard Size plate (13.4cm x 37.2cm) and can have one or two lines of embossed characters. If selecting one line of characters there is a choice of three different heights Large (L) =80mm; Medium (M) =60mm and Small (S) =50mm. If ‘L’ is chosen there can be no more than 6 characters. If ‘M’ chosen then no more than 7 characters. If ‘S’ is chosen no more than 11 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol. Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate If selecting two lines of characters there is only one choice of character height which is Small (S) =50mm with no more than 11 characters including any spaces required Standard size plates are available in the following background colours: White; Black; Sunflower Yellow; Orange; Lipstick Red; Pink; Maroon; Sky Blue; Royal Blue; Green; Purple; Silver and Gold.  Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (2) Aussie Slim Size plate (10cm x 37.2cm) and can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 7 characters. If ‘S’ is chosen no more than 11 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate Slim size plates are available in the following background colours: Black, White, Yellow, Red, Green, Dark Blue, Light Blue, Silver and Pink. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (3a) Euro Size plate (52cm x 11cm) without mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 11 characters. If ‘S’ is chosen no more than 16 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate Euro size plates are available in the following background colours: White, Black or Red. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (3b) Euro Size plate (52cm x 11cm) with mounting holes. Coming soon - all other details excatly the same as 3a (4) Trailer Size plate (25.3cm x 10cm) with mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 4 characters. If ‘S’ is chosen no more than 7 characters. If spaces are required between characters these count as a character. (5) Motorbike Size plate (18.5cm x 10cm) with mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 3 characters. If ‘S’ is chosen no more than 5 characters. If spaces are required between characters these count as a character. All other details as above (6) USA Size plate (30.5cm x 15.5cm) without mounting holes. Can have one line of embossed characters in a choice of three different heights Large (L) = 80mm / Medium (M) =60mm and Small (S) =50mm. If 'L' or ‘M’ chosen no more than 5 characters plus one space. If ‘S’ is chosen no more than 9 characters plus one space. The embossed characters are normally placed central on the plate but can be bottom justified but not top justified. All other details as above In addition to diamonds, dashes, dot/fullstops, we now have even more punctuation options on characters that can be embossed as shown on an attached image. The new characters are: a proper number one with a serif - 1 a hash tag - # apostrophe – ‘ and symbol - & at symbol - @ HOW TO ORDER: First select the number of plates you want to buy, then click the 'Add to Order' button. Then click 'View Order'. Check the plates you want are listed and then click "Add Details and Send" - in this screen there is an "Order Notes" box where you can type in the characters you want on the plate and the colours required, then simply complete your details in the required fields and then hit 'SEND MY ORDER NOW'. You will not be asked for payment until we have ensured we have the details correctly understood By law we must avoid character combinations that are similar to state issued licenced or personalised registration plates and in general this includes avoiding the following Alpa Numeric combinations:  AAA NN / AA NNN / AAA NNN / NNN AAA / NNN AA  / AA NN AA  / NAAANNN. For bon fide car collectors and exhibitors we can get around this if our customer provides a signed statement of intentional use. There is a Colour chart posted on this website HERE  or there is an icon to click on in the linked products below Please be aware these are intended as novelty plates for decoration only. The authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

  • CRONULLA SHARKS – SHARKS

    There are over 60 Novelty plates available in the AFL, NRL, UK SOCCER, NZ, SOUTH AFRICAN & WORLD CUP RUGBY SERIES - any others required can be made at a week’s notice.Popular club names include: AFL CLUBS - ADELAIDE CROWS - BOMBERS - BRISBANE LIONS - BULLDOGS - CARLTON - DEMONS - ESSENDON - FEAR THE DEMONS - FREMANTLE – FREMANTLE DOCKERS - GEELONG CATS - GO CATS - GOLD COAST SUNS - GWS GIANTS - HAWTHORN – HAWTHORN HAWKS - KANGAROOS - MAGPIES - MELBOURNE - MELBOURNE DEMONS - NORTH MELBOURNE - PORT ADELAIDE - POWER - RICHMOND - RICHMOND TIGERS - ST KILDA - ST KILDA SAINTS - SWANS - SYDNEY SWANS - WEST COAST EAGLES.NRL CLUBS - BRONCOS - BULLDOGS – CANBERA RAIDERS - CRONULLA SHARKS – GOLD COAST TITANS - MANLY - MANLY SEA EAGLES – NEWCASTLE KNIGHTS - PARRAMATTA EELS – PENRITH PANTHERS - RABBITOHS - RAIDERS - ROOSTERS - SAINTS - SOUTH SYDNEY RABBITOHS - ST GEORGE – STORMERS -TIGERS – TITANS - WARRIORS - WESTERN BULLDOGS - WESTS TIGERSUK SOCCER CLUBS – WEST HAM THE HAMMERS; OXFORD UNITED; EVERTON TOFFEES; MANCHESTER CITY - NORWICH CANARIES; QUEENS PARK RANGERS; SWANSEA THE SWANS; TOTTENHAM HOTSPUR; MANCHESTER UNITED - LIVERPOOL - ARSENAL THE GUNNERS - CHELSEA THE BLUES.SOUTH AFRICAN RUGBY CLUBS – BULLS, CENTRAL CHEETAHS, LIONS SHARKS, SPRINGBOK, STORMERS.NEW ZEALAND RUGBY CLUBS – ALL BLACKS; NZ WARRIORS.WORLD CUP RUGBY – WALLABIESExtremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm). Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

  • CROC 1

    Extremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm).  Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.