AUS EMBOSSED NOVELTY NUMBER PLATES

    • Ferrari

      Aussie plates are available in a variety of colour combinations – what is shown here is our standard stocked itemExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • FERGIE

      Please select your choice of colour comination from the drop down menuAussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • HOLDEN FE SEDAN

      Our HOLDEN FE SEDAN is of course the iconic Holden. The HOLDEN FE was an automobile produced by General Motors-Holden's in Australia from 1956 to 1958. It was also the first Holden to be assembled in New Zealand, where General Motors New Zealand built their first example on 31 January 1957. The FE models were built on a longer wheelbase than the FJ series Holdens which they replaced and they featured totally different styling, the FJ models having used a body shape carried over from the original Holden 48-215 series introduced in 1948. A single piece windscreen was now fitted and other improvements included a 12 volt electrical system (replacing the previous 6 volt system), improved steering, a front stabiliser bar and wider wheel rims. All models used a 2262 cc in-line six cylinder engine, coupled with a 3 speed manual gearbox. Engine improvements over the FJ included the use of bigger valves and the lifting of the compression ratio to 6.8:1, which increased the power output from 45 kW (60 hp) to 53 kW (71 hp). There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FCUK

      The FCUK novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN FC SEDAN

      Our HOLDEN FC SEDAN is of course the iconic Holden. The HOLDEN FC was an automobile produced by Holden in Australia from 1958 to 1960. Introduced on 6 May 1958, the FC is a facelifted and improved version of the Holden FE series, which it replaced. The FC range consisted of four door sedans in three trim levels, five door station wagons, marketed as "Station Sedans" in two trim levels, a two-door coupe utility and a three-door panel van. The seven models were : Holden Standard Sedan / Holden Standard Station Sedan / Holden Business Sedan / Holden Special Sedan / Holden Special Station Sedan / Holden Utility / Holden Panel Van Although the FC series was substantially the same as the FE, it featured revisions to the radiator grille, body trim and interior. Minor mechanical improvements were also made, with changes to the engine, suspension, brakes, gearchange linkages and the steering box. The Utility now featured painted rather than chromed grille and headlight rims, as did the Panel Van. All FC models were powered by a 132-cubic-inch (2.2 L) six-cylinder engine producing 72 brake horsepower (54 kW). This engine was carried over from the FE series, although the camshaft was altered, the compression ratio was increased and torque was improved. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN FB SEDAN

      Our HOLDEN FB SEDAN is of course the iconic Holden. The HOLDEN FB was an automobile produced by General Motors-Holden's in Australia from 1960 to 1961. Introduced on 14 January 1960, the FB series replaced the Holden FC range. The FB range consisted of four-door sedans in two trim levels, five-door station wagons in two trim levels, a two-door coupe utility and a two-door panel van. The six models were marketed as follows: Holden Standard Sedan / Holden Standard Station Sedan / Holden Special Sedan / Holden Special Station Sedan / Holden Utility / Holden Panel Van. The Holden Business Sedan, which had been marketed as part of the FC range, was not carried over to the FB series. The FB was promoted as being longer, lower, more spacious and more powerful than the FC model although in reality it was only slightly so on each count. Overall length was 5.5 inches (140 mm) greater whilst the wheelbase remained the same. The engine remained the same at 3" the last model to have this bore, engine capacity remained at 132 cubic inches and the compression ratio was raised. However the resulting extra 4 brake horsepower (3.0 kW) of power did not compensate for the extra weight of the FB and performance was thus inferior to that of its predecessor. Changes were also made to the brakes, front coil springs, air cleaner and clutch. Obvious styling differences were the lower bonnet, finned rear mudguards with new taillights (on the sedans and wagons only) and a wrap-around windscreen. Seating was improved as was the instrument panel. Notably, the FB was the first Holden model to also be produced in left-hand drive form, these vehicles being destined for export markets. All FB models were powered by a 132 cubic inches (2,160 cc) inline six-cylinder engine, the last to have the 3" bore size, producing 75 brake horsepower (56 kW). After a production run of 147,747 vehicles, the FB was replaced by the Holden EK series in May 1961. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FARKEW2

      Our novelty number plate worded FARKEW2 is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • FAR KURNELL

      FAR KURNELL is of course a play on words, but there is in fact a suburb in Sydney named Kurnell which is 21.4 kms south of the Sydney CBD, in the local government area of the Sutherland Shire along the east coast. The FAR KURNELL novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • F100

      Aussie plates are available in a variety of colour combinations – what is shown here is our standard stocked item Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • EUREKA FLAG – OUR LAND / OUR COUNTRY / OUR WAY

      Our latest Eureka Novelty plate 'OUR LAND - OUR COUNTRY - OUR WAY' is available in both Aussie standard size and in US size Aussie plate (37cm x 13cm) - Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle, and have embossed characters and an embossed border American Plate (30 x 15cm) and is a non-embossed flat product. We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. All items we stock are licensed in accordance with trademark and copyright requirements.

    • EUREKA FLAG ON AUSSIE PLATE

      We now have two options for EUREKA FLAG ON AUSSIE PLATE - the standard Eureka Flag (also known as the Southern Cross plate and a new 2nd option  - OUR LAND,OUR COUNTRY,OUR WAY. Please make your selection from the menu Aussie plates (37cm x 13cm) are extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN EJ SEDAN

      The HOLDEN EJ SEDAN novelty number plate refers to the Holden EJ - a motor vehicle which was produced by General Motors-Holdens in Australia from 1962 to 1963. Introduced in July 1962,the EJ replaced the Holden EK series. The styling of the EJ was a radical departure from that of the EK with a lower roof line, a flatter boot and an absence of fins. Improvements were made to the brakes, front suspension and the Hydra-matic automatic transmission. A new luxury model, the Holden Premier, made its debut in the EJ series and featured leather interior, bucket seats, metallic paint, a heater/demister with centre console and arm rests on all four doors. It was fitted with Hydra-matic 3-speed automatic transmission as standard equipment, this being optional on other EJ series models. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN EH SEDAN

      The HOLDEN EH SEDAN novelty number plate refers to the Holden EH automobile produced by General Motors-Holden in Australia from 1963 to 1965. The EH was released in August 1963 replacing the Holden EJ series and was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). The 179 ci (2900cc) engine was only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box, was called the "EH-S4". The 179ci engine then became available with an up-graded manual gear box, with stronger gears then the 149ci gear box. The three-speed manual (column shift) gear boxes had no synchromesh on first gear, requiring double de-clutching. The 179 ci manual also used an up-graded clutch. A total of 256,959 EH Holdens were produced and sold from 1963 to 1965, when the EH was replaced by the Holden HD series. Holden EH's were offered in the following models: Standard Sedan; Standard Station Sedan; Special Sedan; Special Station Sedan; S4 Special Sedan; Premier Sedan; Premier Station Sedan; Ute (Utility) and Panel Van. Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • ECHUCA

      Echuca is a town located on the banks of the Murray River and Campaspe River in Victoria, Australia. The border town of Moama is on the northern side of the Murray River in New South Wales. Echuca is the administrative centre and largest settlement in the Shire of Campaspe. As of the 2011 census, Echuca had a population of 13,708. Echuca, an Aboriginal name meaning "Meeting of the Waters" is indicative of the role rivers have played in the town's existence. Echuca is situated close to the junction of the Goulburn, Campaspe and Murray Rivers. Its position at the closest point of the Murray to Melbourne contributed to its development as a thriving river port city during the 19th century. This plate is currently available in three variations with just a few of the old style pressed and embossed plate remaining Thereafter the plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • DUCATI

      Aussie plates (37cm x 13cm) are available in a variety of colour combinations – what is shown here is our standard stocked item but other colour combinations can be made at a weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • German Shepherd

      The German Shepherd  is a breed of medium to large-sized working dog that originated in Germany. The breed's officially recognized name is German Shepherd Dog in the English language, sometimes abbreviated as GSD and was also formerly known as the Alsatian in Britain.The German Shepherd is a relatively new breed of dog, with their origin dating to 1899. As part of the Herding Group, German Shepherds are working dogs developed originally for herding sheep. Since that time however, because of their strength, intelligence, trainability, and obedience, German Shepherds around the world are often the preferred breed for many types of work, including disability assistance, search-and-rescue, police and military roles, and even acting. The German Shepherd is the 2nd most registered breed by the American Kennel Club and 3rd most registered breed in Australia There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • Border Collie

      The Border Collie novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. A new  flat and non-embossed plate will replace the older style and but we are able to give it a pressed out embossed border, so you have a choice. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition. If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do that for you - for more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • DARWIN

      The DARWIN novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. A new  flat and non-embossed plate will replace the older style and but we are able to give it a pressed out embossed border, so you have a choice. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition. If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do that for you - for more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • PERSONALISED SHED PIC PLATE

      The PERSONALISED SHED PIC PLATE novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. Unfortunately this design is no longer manufactured so what we have on the shelves is the last of them - and we have at least 300 left, so why not give your man’s shed its own PERSONALISED SHED PIC PLATE at a discounted price PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • DADS BAR – CLEARANCE PLATE

      This DADS BAR - CLEARANCE PLATE plate is discounted heavily as it has four small numerals 12; 3, 6, & 9 on it as it was made to be a clock face, (but we no longer sell clocks)  otherwise it's no difference to the normal DADS BAR novelty plate, and a deft touch of a black texter would hide the numerals. The DADS BAR - CLEARANCE PLATE is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it was manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. A new  flat and non-embossed plate will replace the older style and but we are able to give it a pressed out embossed border, so you have a choice. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition. If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do that for you - for more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CUSTOM MADE PLATE WITH 1 STICKER

      The CUSTOM MADE PLATE WITH 1 STICKER is for customers wanting a custom novelty number plate with more than one line of embossed characters. We can add 1, 2 or 3 lines of text in high quality vinyl decals, as well as small clip art symbols. Great for car clubs that want their own plate with member numbers or member names,or for sponsored prizes at UTE Musters etc - see example pics of plate shown or email us for samples of others we have done. The stickers can be upto 34.5cms long, and can be done in practically any font but we use Garage Gothic as default as its a close match to the embossed characters. Sticker character heights vary from 1.2 cms upto 4.5 cms depending what size embossed characters are used and whether they are placed top,middle or bottom of the plate. Embossed characters - Large characters are 8cm tall with max 6 characters across plate, and are centrally positioned; Medium characters are 6cm tall with max 7 across plate. Small characters are 5 cm tall with max 10 across plate. Both medium and small (but not large) can be positioned at top, bottom, left or right of plate. To order, just select your choice of plate type (1,2 or 3 sticker) and then in the comments box on the order form tell us what characters you require.  Production turnaround is on a weekly cycle. It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured.  The CUSTOM MADE PLATE WITH 1 STICKER sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today!   BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition There is a colour chart at http://dixiesouvenirs.com/shop/colour-chart-for-aussie-custom-plates/ or as shown in the linked products at foot of page

    • CUSTOM MADE PLATE WITH 2 STICKER

      The CUSTOM MADE PLATE WITH 2 STICKER is for customers wanting a custom novelty number plate with more than one line of embossed characters. We can add 1, 2 or 3 lines of text in high quality vinyl decals, as well as small clip art symbols. Great for car clubs that want their own plate with member numbers or member names,or for sponsored prizes at UTE Musters etc - see example pics of plate shown or email us for samples of others we have done. The stickers can be upto 34.5cms long, and can be done in any font but we use Garage Gothic as default as its a close match to the embossed characters. Sticker character heights vary from 1.2 cms upto 4.5 cms depending what size embossed characters are used and whether they are placed top,middle or bottom of the plate. Embossed characters – Large characters are 8cm tall with max 6 characters across plate, and are centrally positioned; Medium characters are 6cm tall with max 7 across plate. Small characters are 5 cm tall with max 10 across plate. Both medium and small (but not large) can be positioned at top, bottom, left or right of plate. To order,just select your choice of plate type (1,2 or 3 sticker) - SEE LINKS BELOW - and then in the comments box on the order form tell us what characters you require.  Production turnaround is on a weekly cycle. It is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The CUSTOM MADE PLATE WITH 2 STICKER sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today!   BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition There is a colour chart at http://dixiesouvenirs.com/shop/colour-chart-for-aussie-custom-plates/ or as shown in the linked products at foot of page Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • AUSSIE SIZE PERSONALISED PLATE

      An AUSSIE SIZE PERSONALISED PLATE  can be done as "One Offs" or in large numbers and production turnaround is on a weekly cycle. AUSSIE SIZE PLATE PERSONALISED plates are available in the following sizes: (1) Aussie Standard Size plate (13.4cm x 37.2cm) and can have one or two lines of embossed characters. If selecting one line of characters there is a choice of three different heights Large (L) =80mm; Medium (M) =60mm and Small (S) =50mm. If ‘L’ is chosen there can be no more than 6 characters. If ‘M’ chosen then no more than 7 characters. If ‘S’ is chosen no more than 11 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol. Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate If selecting two lines of characters there is only one choice of character height which is Small (S) =50mm with no more than 11 characters including any spaces required Standard size plates are available in the following background colours: White; Black; Sunflower Yellow; Orange; Lipstick Red; Pink; Maroon; Sky Blue; Royal Blue; Green; Purple; Silver and Gold.  Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (2) Aussie Slim Size plate (10cm x 37.2cm) and can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 7 characters. If ‘S’ is chosen no more than 11 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate Slim size plates are available in the following background colours: Black, White, Yellow, Red, Green, Dark Blue, Light Blue, Silver and Pink. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (3a) Euro Size plate (52cm x 11cm) without mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 11 characters. If ‘S’ is chosen no more than 16 characters. If spaces are required between characters these count as a character. As well as alpha and numeric characters we also can emboss a diamond; a dash; a dot/fullstop. Coming soon will be a numeric 1 with a serif as well as the & and apostrophe symbol Small and Medium characters can be positioned vertically to top, centre or bottom and horizontally to left, centre or right of plate Euro size plates are available in the following background colours: White, Black or Red. Characters and borders can be embossed in the following colours: White; Black; Blue; Yellow; Gold; Silver; Green; Red; Maroon (3b) Euro Size plate (52cm x 11cm) with mounting holes. Coming soon - all other details excatly the same as 3a (4) Trailer Size plate (25.3cm x 10cm) with mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 4 characters. If ‘S’ is chosen no more than 7 characters. If spaces are required between characters these count as a character. (5) Motorbike Size plate (18.5cm x 10cm) with mounting holes. Can have one line of embossed characters in a choice of two different heights Medium (M) =60mm and Small (S) =50mm. If ‘M’ chosen no more than 3 characters. If ‘S’ is chosen no more than 5 characters. If spaces are required between characters these count as a character. All other details as above (6) USA Size plate (30.5cm x 15.5cm) without mounting holes. Can have one line of embossed characters in a choice of three different heights Large (L) = 80mm / Medium (M) =60mm and Small (S) =50mm. If 'L' or ‘M’ chosen no more than 5 characters plus one space. If ‘S’ is chosen no more than 9 characters plus one space. The embossed characters are normally placed central on the plate but can be bottom justified but not top justified. All other details as above In addition to diamonds, dashes, dot/fullstops, we now have even more punctuation options on characters that can be embossed as shown on an attached image. The new characters are: a proper number one with a serif - 1 a hash tag - # apostrophe – ‘ and symbol - & at symbol - @ HOW TO ORDER: First select the number of plates you want to buy, then click the 'Add to Order' button. Then click 'View Order'. Check the plates you want are listed and then click "Add Details and Send" - in this screen there is an "Order Notes" box where you can type in the characters you want on the plate and the colours required, then simply complete your details in the required fields and then hit 'SEND MY ORDER NOW'. You will not be asked for payment until we have ensured we have the details correctly understood By law we must avoid character combinations that are similar to state issued licenced or personalised registration plates and in general this includes avoiding the following Alpa Numeric combinations:  AAA NN / AA NNN / AAA NNN / NNN AAA / NNN AA  / AA NN AA  / NAAANNN. For bon fide car collectors and exhibitors we can get around this if our customer provides a signed statement of intentional use. There is a Colour chart posted on this website HERE  or there is an icon to click on in the linked products below Please be aware these are intended as novelty plates for decoration only. The authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CROATIA

      This CROATIA novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • CHRYSLER

      The CHRYSLER novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CHARGER

      The CHARGER novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CANE TOADS

      State Of Origin kicks off in May/June so get ready with the CANE TOADS Dixie supporters novelty number plates. The CANE TOADS novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • CAIRNS

      The CAIRNS is of course the capital of far North Queensland and gateway to Cape York. There are just a handful of the old style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • BYRON BAY

      The BYRON BAY  plate would be great as a tourist gift or on the motorhome. There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • BRISBANE LIONS

      There are over 60 Novelty plates available in the AFL, NRL, UK SOCCER, NZ, SOUTH AFRICAN & WORLD CUP RUGBY SERIES - any others required can be made at a week’s notice. Popular club names include:AFL CLUBS - ADELAIDE CROWS - BOMBERS - BRISBANE LIONS - BULLDOGS - CARLTON - DEMONS - ESSENDON - FEAR THE DEMONS - FREMANTLE – FREMANTLE DOCKERS - GEELONG CATS - GO CATS - GOLD COAST SUNS -  GWS GIANTS - HAWTHORN – HAWTHORN HAWKS - KANGAROOS - MAGPIES - MELBOURNE - MELBOURNE DEMONS - NORTH MELBOURNE - PORT ADELAIDE - POWER - RICHMOND - RICHMOND TIGERS - ST KILDA - ST KILDA SAINTS - SWANS - SYDNEY SWANS - WEST COAST EAGLES.NRL CLUBS - BRONCOS - BULLDOGS – CANBERA RAIDERS - CRONULLA SHARKS – GOLD COAST TITANS - MANLY - MANLY SEA EAGLES – NEWCASTLE KNIGHTS - PARRAMATTA EELS – PENRITH PANTHERS - RABBITOHS - RAIDERS - ROOSTERS - SAINTS - SOUTH SYDNEY RABBITOHS - ST GEORGE – STORMERS -TIGERS – TITANS - WARRIORS - WESTERN BULLDOGS - WESTS TIGERSUK SOCCER CLUBS – WEST HAM THE HAMMERS; OXFORD UNITED; EVERTON TOFFEES; MANCHESTER CITY - NORWICH CANARIES; QUEENS PARK RANGERS; SWANSEA THE SWANS; TOTTENHAM HOTSPUR; MANCHESTER UNITED - LIVERPOOL - ARSENAL THE GUNNERS - CHELSEA THE BLUES.SOUTH AFRICAN RUGBY CLUBS – BULLS, CENTRAL CHEETAHS, LIONS SHARKS, SPRINGBOK, STORMERS.NEW ZEALAND RUGBY CLUBS – ALL BLACKS; NZ WARRIORS.WORLD CUP RUGBY – WALLABIESExtremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm).  Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

    • BRISBANE LIONS

      To fit around standard size Aussie Plates (37cm x 13cm) High quantity injection moulded plastic frames in Black,with wording on bottom ...Please note that fonts may vary slightly from batch to batch

    • BRISBANE CITYSCAPE

      The BRISBANE CITYSCAPE is of course the Queensland capital. There are just a handful of the old style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.