AUS EMBOSSED NOVELTY NUMBER PLATES

    • 1 TUFF Series – No Bulletholes

      Each plate has a background with the words "1 TUFF" .There''s another range with bullet holes in the background also shown on the website - see link further down this page.There is a wide variety of embossed words such as HARLEY, HOLDEN, OLD BITCH, OLD FART; OLD BLOKE, as well as many of the HOLDEN and FORD car series codes such as HQ, GTR, BS, VK, VL, VN, XC and so on - the list is very long!Please select from the drop down menu and if you want "1 TUFF" anything else then just let us know and if its 10 characters or under we can get it made. If your choice is listed but there is no image then don't worry as we can still supply itThese Standard Size Aussie Number Plates measure 37cm x 13cm and are extremely high quality Australian manufacture. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • TUFF SERIES

      There are several plates in the TUFF SERIES of novelty plates which are ideal for those customers that prefer the plate to read TUFF rather than 1 TUFF. There aren't many in this range just yet (just HQ; VE, VF, VN and VP) but it will grow. Please select from the drop down menu These TUFF SERIES novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • HOLDEN HG KINGSWOOD SEDAN

      Our HOLDEN HG KINGSWOOD SEDAN is of course the iconic Holden. The Holden HG is an automobile which was produced by Holden in Australia between 1970 and 1971. It was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names. The Holden HG range was introduced on 26 July 1970, replacing the Holden HT series which had been in production since May 1969.Changes from the previous model included new grilles and body decorations as well as new safety features, colours and trim designs. All V8-engined models were now fitted with improved disc brakes and the suspension system of the Monaro GTS was modified for greater comfort. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN FB UTE

      Our HOLDEN FB UTE is of course the iconic Holden. The Holden FB is an automobile that was produced by Holden in Australia from 1960 to 1961. Introduced on 14 January 1960, the FB series replaced the Holden FC range. It was promoted as being longer, lower, more spacious and more powerful than the FC model although in reality it was only slightly so on each count. Overall length was 5.5 inches (140 mm) greater whilst the wheelbase remained the same. The engine remained the same at 3" the last model to have this bore, engine capacity remained at 132 cubic inches and the compression ratio was raised. However the resulting extra 4 brake horsepower (3.0 kW) of power did not compensate for the extra weight of the FB and performance was thus inferior to that of its predecessor. Changes were also made to the brakes, front coil springs, air cleaner and clutch. Obvious styling differences were the lower bonnet, finned rear mudguards with new taillights (on the sedans and wagons only) and a wrap-around windscreen. Seating was improved as was the instrument panel. Notably, the FB was the first Holden model to also be produced in left-hand drive form, these vehicles being destined for export markets. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • E49 CHARGER

      The Chrysler Valiant E49 CHARGER was extraordinarily popular in Australia and Chrysler Australia's most famous 'muscle car'. Introduced in 1971, it was a short wheelbase 2 door coupe based on the concurrent Valiant sedan. Production ceased in 1978. The VH  Charger achieved critical acclaim, winning the 1971 Australian Wheels car of The Year. Our Aussie Classic range is growing all the time and currently features many fantastic Chrysler, Ford and Holden plates There are just a handful of the older style pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and can be hung inside or outside and each is pre-drilled so ready to hang. A new style  flat and non-embossed plate will replace the older style and for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These new style novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates or signs made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on how to create a sign or plate to YOUR design PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • NED KELLY BUCKET ARMOUR

      NED KELLY BUCKET ARMOUR of course is all about Edward "Ned" Kelly (December 1854 – 11 November 1880) - the infamous Australian bushranger of Irish descent. Kelly was born in Victoria as the third of eight children to an Irish convict from County Tipperary and an Australian mother with Irish parentage. His father died after serving a six-month prison sentence, leaving Kelly, then aged 12, as the eldest male of the household. The Kellys were a poor selector family who saw themselves as downtrodden by the "Squattocracy" and as victims of police persecution. Arrested in 1870 for associating with bushranger Harry Power, Kelly was first convicted of stealing horses and imprisoned for three years. He fled to the bush in 1878 after being indicted for the attempted murder of a police officer at the Kelly family's home. After he, his brother Dan, and two associates fatally shot three policemen, the Government of Victoria proclaimed them outlaws. He and his gang, dressed in homemade suits of metal armour, engaged in a final violent confrontation with the Victoria Police at Glenrowan on 28 June 1880. All were killed except Kelly, who was severely wounded by police fire and captured. Despite support for his reprieve, Kelly was tried, convicted and sentenced to death by hanging, which was carried out at the Old Melbourne Gaol. His final words are famously reported to have been "such is life". There are just a handful of the pressed embossed Aussie size novelty number plate left, (only the silver background version) as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! There's no restriction on colours, text or pictures (images) but please no inappropriate words or images. For more details on how to create a sign or plate to YOUR design according to YOUR choice. PLEASE CLICK HERE Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HARLEY DAVIDSON

      This plate has one line HARLEY in embossed characters and the bottom line DAVIDSON is applied in a high quality vinyl sticker.Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle, and have embossed characters and an embossed border

    • GTS MNRO

      The GTS MNRO novelty plate refers to the Holden Monaro rear wheel drive coupe that was produced by Holden between 1968 and 1977 and between 2001 and 2006. Three generations of the Monaro have been produced, with the last spawning an all wheel-drive variant, export models and various concept cars. The GTS MNRO novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • TOYOTA 4 X 4

      This is available as either TOYOTA 4WD or TOYOTA 4x4 This TOYOTA 4 X 4 novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • HAPPY HOUR ANY HOUR

      The HAPPY HOUR ANY HOUR novelty plates make GREAT GIFT IDEAS FOR FATHERS DAY OR IN FACT ANY DAY! Aussie plate (37cm x 13cm) - This plate has one line HAPPY HOUR in embossed characters and the bottom line ANY HOUR is applied in a high quality vinyl sticker. Extremely high quality Australian manufactured Standard Size Number Plate made from Aluminium.  Dixie’s plate sizes are the same as those on a normal vehicle, and have embossed characters and an embossed border. If you would like a similar two colour plate made to your own design, we can easily do this for you. For more details on creating a plate to your design please click HERE American Plate (30 x 15cm) and is a non-embossed flat product. We carry only the highest quality novelty number plates that are manufactured and these are lightweight aluminium for durability and each is pre-drilled so ready to hang. All these fun and unique designs will make a funny and thoughtful gift sure to generate lots of fun conversation and look great hanging in your garage bar rec room games room or where ever you want to hang them. We sell for a great price and offer a wide variety so get yours today! For protection from factory to customer each is shrink-sealed in plastic film and we freight with extra packing materials to ensure they arrive in tip-top condition. Important note about images we provide : Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • PERSONALISED UTE PLATE

      Our PERSONALISED UTE PLATE novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” We stock some names such as CRAIGS UTE; JASONS UTE; STEVES UTE; JERRYS UTE; LUKES UTE; DAVES UTE; PETES UTE; NICKS UTE; ALANS UTE; JIMS UTE; RAYS UTE. Others can be made on request - 10 embossed characters maximum are allowed in one line, so any name 5 letters or less plus a letter S then a space then the word UTE, so all up 10 characters including the space can be put on a plate similar to the ones shown here. The Longhorns are not embossed and are applied as a high quality vinyl sticker. For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN EJ UTE

      Our HOLDEN EJ UTE is of course the iconic Holden. The Holden EJ was a motor vehicle which was produced by General Motors-Holden's in Australia from 1962 to 1963. Introduced in July 1962, the EJ replaced the Holden EK series.The styling of the EJ was a radical departure from that of the EK with a lower roofline, a flatter boot and an absence of fins. Improvements were made to the brakes, front suspension and the Hydra-matic automatic transmission. A new luxury model, the Holden Premier, made its debut in the EJ series and featured leather interior, bucket seats, metallic paint, a heater/demister with centre console and arm rests on all four doors. It was fitted with Hydra-matic 3-speed automatic transmission as standard equipment, this being optional on other EJ series models. On introduction, the EJ range consisted of four-door sedans in three trim levels and five-door station wagons in two trim levels. A two-door coupe utility and a two-door panel van were added to the range in January 1963. The seven models were marketed as follows: Holden Standard Sedan / Holden Special Sedan / Holden Premier Sedan / Holden Standard Station Sedan / Holden Special Station Sedan / Holden Utility / Holden Panel Van There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN HR UTE

      The HOLDEN HR UTE novelty number plate refers to the Holden HR range released in April 1966, replacing the Holden HD series which had been in production since 1965. In addition to a revised grille, the HR featured a reworked roofline and larger rear window (on the sedans), revised rear lights (on sedans and wagons) and changes to almost all exterior body panels. Other changes included revised ball joint front suspension, widened track, improved interior trim and woodgrain interior finish for the Premier models. Six months after the launch of the HR, all models were given a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sun visors and a shatterproof interior rearview mirror. Holden HR range offered four-door sedan and five-door station wagon body styles in three trim levels with the six models marketed as follows. Holden Standard sedan (HR 215) ; Holden Standard station sedan (HR 219); Holden Special sedan (HR 225); Holden Special station sedan (HR 229); Holden Premier sedan (HR 235); Holden Premier station sedan (HR 239). Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • XXXX

      The XXXX novelty number plate is representative of Queenslands favourite drop. Pronounced fourex it is a brand of Australian beer brewed in Milton, Brisbane by Castlemaine Perkins (now a division of the Japanese-owned company Lion Nathan). It enjoys wide popularity in the state of Queensland, where it is commonly found on-tap in pubs and bars.The XXXX brand was first introduced in 1924 and is a throwback to the long standing tradition of using Xs to indicate the strength of an ale. The brand name also built upon XXX Sparkling Ale introduced in 1878. The brand is used on the XXXX Bitter, XXXX Gold, XXXX Light Bitter (Lager), XXXX DL (Diet Lager) and Sovereign (Lager).Dixie’s Aussie size plates are made in Australia and measure 37cm x 13cm – the same as a standard size ‘real’ number plate. The Aussie manufacturer is the very same company that makes the ‘real’ plates, and they have been producing and selling quality Novelty Number Plates for many years. The plates look the same as those on a normal vehicle, and have embossed characters and an embossed border. They can be hung inside or outside and each is pre-drilled so ready to hang and would look very nice framed. Each Aussie XXXX plate is supplied in a clear plastic sleeve with a hanging display card affixed so they are ready for in-store display. We sell for a great price and offer a wide variety so get yours today! For protection in delivery each has extra packing materials to ensure they arrive in tip-top conditionThere are several colour options - please select your preferred XXXX from the drop down menu

    • HOLDEN TORANA GTR XU-1

      The HOLDEN TORANA GTR XU-1 novelty number plate refers to the Holden Torana GTR-X designed during the era of the LC series, and was seriously considered for production in the early 1970s. The GTR-X had a wedge-shaped fibreglass body featuring a hatchback rear access, and the prototype cars had LC Torana GTR XU-1 mechanical components. The GTR-X looks similar to iconic sports cars of the 1970s, such as the Maserati Khamsin, Ferrari 308 GT4, Lotus Esprit, and Mazda RX-7. It weighed 1,043 kg (2,299 lb) and has a top speed of 210 km/h (130 mph). The Torana GTR-X in production would have been the first Holden car to be factory fitted with four-wheel disc brakes. When Holden released a promotional brochure about the GTR-X, they said, "Its long, sleek hood is accentuated by a low, wedge-shaped grille. The body line sweeps up at the rear to an elevated tail light assembly. Simplicity is the keynote. It is achieved by concealed headlights, sharp windshield rake, recessed parking and turning lights, and flush petrol filler access and door handles. Front and rear bumpers assume the contour of the body. To identify the car, the GTR-X identification is contained within a crisp black and orange stripe running parallel to the rocker panel". The Torana GTR-X was highly developed by Holden from concept, and though brochures, photography and promotional films were produced to show how serious they were in putting the car into production, the company was ultimately unable to justify the high cost of committing itself to production given the size of the Australian population then. The only existing complete prototype GTR-X car has been recently restored back to its original white paint finish and remains on public display at the Salmon Street offices of Holden in Melbourne, Victoria. This car, originally white as pictured, was painted silver in the mid '70s. It had UC Torana SL/E wheels fitted and a few other cosmetic changes (bonnet badge, etc.) in an attempt by Holden to move the car with the times and "restore it". During this period, it toured motor museums around the country, including the National Motor Museum at Birdwood in South Australia. In 2003, the car was returned to its original build condition (white) by Car Shine in Melbourne, prior to being shipped to the US to the General Motors Technical Center at Michigan for the celebration of automotive design spanning the past 75 years. One other preproduction GTR-X is in the hands of a former long-time Holden employee, along with the body mold jig to make more fibreglass bodies. Whether this car will ever be finished is unknown due to the age of the owner. The picture of this orange car can be seen in Norm Darwin's book release of the Torana, but the name and location of the owner is kept secret to prevent possible theft. Notes courtesy Wikipedia This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • XB COUPE

      Aussie plates (37cm x 13cm) shown here are our standard stocked items but other words can be embossed and manufactured at a couple of weeks noticeExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years. Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border

    • WOG GIRL

      The WOG GIRL novelty number plates are popular in Australia. Available in different colours - please select from drop down menus - others colour combinations can be made at a week’s notice. The MUSEUM VICTORIA has this and its sister WOG BOY plate listed in an exhibit summarizing it thus: Novelty Number Plate embossed with the term "Wog Boy" in capitals in white type. Aimed at the male population this number plate was not manufactured for insulting purposes but as a humorous way of reclaiming the term 'wog'.  This number plate show how a racist term 'wog' has been reclaimed in recent times and proudly used to broadcast a non-Anglo Australian ethnic identity. The term 'wog' and its racial underpinnings are thought to derive from the word 'golliwog' in the late 19th century. In Australian English since the 1950s,'wog' is a slang term directed against people of Southern European,Mediterranean and Middle Eastern ancestry. More recent stereotypes of 'wogs' suggest that they take great pride in their cars,typically driving turbo,'hotted up' cars such as V8s. The combining of the word 'wog' with the material artefact of the number plate playfully reinforces the modern stereotype of a 'wog' and is not racist if used by a self-identified 'wog'. It shows how a racist term can be reclaimed and worn with pride. The WOG GIRL novelty number plates are the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable

    • WILD TURKEY

      The WILD TURKEY novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate with two lines of embossed characters 5cm high. Extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • WESTS TIGERS

      There are over 60 Novelty plates available in the AFL, NRL, UK SOCCER, NZ, SOUTH AFRICAN & WORLD CUP RUGBY SERIES - any others required can be made at a week’s notice. Popular club names include:AFL CLUBS - ADELAIDE CROWS - BOMBERS - BRISBANE LIONS - BULLDOGS - CARLTON - DEMONS - ESSENDON - FEAR THE DEMONS - FREMANTLE – FREMANTLE DOCKERS - GEELONG CATS - GO CATS - GOLD COAST SUNS -  GWS GIANTS - HAWTHORN – HAWTHORN HAWKS - KANGAROOS - MAGPIES - MELBOURNE - MELBOURNE DEMONS - NORTH MELBOURNE - PORT ADELAIDE - POWER - RICHMOND - RICHMOND TIGERS - ST KILDA - ST KILDA SAINTS - SWANS - SYDNEY SWANS - WEST COAST EAGLES.NRL CLUBS - BRONCOS - BULLDOGS – CANBERA RAIDERS - CRONULLA SHARKS – GOLD COAST TITANS - MANLY - MANLY SEA EAGLES – NEWCASTLE KNIGHTS - PARRAMATTA EELS – PENRITH PANTHERS - RABBITOHS - RAIDERS - ROOSTERS - SAINTS - SOUTH SYDNEY RABBITOHS - ST GEORGE – STORMERS -TIGERS – TITANS - WARRIORS - WESTERN BULLDOGS - WESTS TIGERSUK SOCCER CLUBS – WEST HAM THE HAMMERS; OXFORD UNITED; EVERTON TOFFEES; MANCHESTER CITY - NORWICH CANARIES; QUEENS PARK RANGERS; SWANSEA THE SWANS; TOTTENHAM HOTSPUR; MANCHESTER UNITED - LIVERPOOL - ARSENAL THE GUNNERS - CHELSEA THE BLUES.SOUTH AFRICAN RUGBY CLUBS – BULLS, CENTRAL CHEETAHS, LIONS SHARKS, SPRINGBOK, STORMERS.NEW ZEALAND RUGBY CLUBS – ALL BLACKS; NZ WARRIORS.WORLD CUP RUGBY – WALLABIESExtremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm).  Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

    • WEST HAM

      There are over 60 Novelty plates available in the AFL, NRL, UK SOCCER, NZ, SOUTH AFRICAN & WORLD CUP RUGBY SERIES - any others required can be made at a week’s notice. Popular club names include:AFL CLUBS - ADELAIDE CROWS - BOMBERS - BRISBANE LIONS - BULLDOGS - CARLTON - DEMONS - ESSENDON - FEAR THE DEMONS - FREMANTLE – FREMANTLE DOCKERS - GEELONG CATS - GO CATS - GOLD COAST SUNS -  GWS GIANTS - HAWTHORN – HAWTHORN HAWKS - KANGAROOS - MAGPIES - MELBOURNE - MELBOURNE DEMONS - NORTH MELBOURNE - PORT ADELAIDE - POWER - RICHMOND - RICHMOND TIGERS - ST KILDA - ST KILDA SAINTS - SWANS - SYDNEY SWANS - WEST COAST EAGLES.NRL CLUBS - BRONCOS - BULLDOGS – CANBERA RAIDERS - CRONULLA SHARKS – GOLD COAST TITANS - MANLY - MANLY SEA EAGLES – NEWCASTLE KNIGHTS - PARRAMATTA EELS – PENRITH PANTHERS - RABBITOHS - RAIDERS - ROOSTERS - SAINTS - SOUTH SYDNEY RABBITOHS - ST GEORGE – STORMERS -TIGERS – TITANS - WARRIORS - WESTERN BULLDOGS - WESTS TIGERSUK SOCCER CLUBS – WEST HAM THE HAMMERS; OXFORD UNITED; EVERTON TOFFEES; MANCHESTER CITY - NORWICH CANARIES; QUEENS PARK RANGERS; SWANSEA THE SWANS; TOTTENHAM HOTSPUR; MANCHESTER UNITED - LIVERPOOL - ARSENAL THE GUNNERS - CHELSEA THE BLUES.SOUTH AFRICAN RUGBY CLUBS – BULLS, CENTRAL CHEETAHS, LIONS SHARKS, SPRINGBOK, STORMERS.NEW ZEALAND RUGBY CLUBS – ALL BLACKS; NZ WARRIORS.WORLD CUP RUGBY – WALLABIESExtremely high quality Australian manufactured Standard Size Aluminium Number Plate (37cm x 13cm).  Dixie’s plates are made by the same company that’s been producing and selling quality Novelty Plates for many years, and are the same as those on a normal vehicle, with embossed characters and an embossed border.

    • WA 4 EVER

      The WA 4 EVER novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. Aussie states available in this series are ACT 4 EVER; NSW 4 EVER; NT 4 EVER; QLD 4 EVER; SA 4 EVER; TAS 4 EVER; VIC 4 EVER; WA 4 EVER - see website links below These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • VIC 4 EVER

      The VIC 4 EVER novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. Aussie states available in this series are ACT 4 EVER; NSW 4 EVER; NT 4 EVER; QLD 4 EVER; SA 4 EVER; TAS 4 EVER; VIC 4 EVER; WA 4 EVER - see website links below These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • HOLDEN VB SEDAN

      Our HOLDEN VB SEDAN is of course the iconic Holden. The Holden VB was an automobile produced by General Motors-Holden's in Australia from 1978 to 1980. It was the first iteration of the first generation of this Australian made model. The car was officially launched on 26 October 1978 with showrooms receiving the first examples on 13 November 1978. Production of the VB only lasted seventeen months, the shortest reign of any Commodore. The VB Commodore was effectively the successor of the Holden HZ, although most models in that series continued to be produced until the introduction of the facelifted VC Commodore on 30 March 1980. 95,906 units of the VB Commodore were manufactured during the car's lifespan, and during 1979 the VB became Australia's number one selling car. Also in 1979, the VB won Wheels Car of the Year award, with the car being praised in the media for its value for money and engineering sophistication. There are just a handful of the pressed embossed Aussie size novelty number plate left, as this type of plate is phasing out. This is a standard size 37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years. The sign can be hung inside or outside and each is pre-drilled so ready to hang. This popular plate comes standard as completely flat and non-embossed but for a little more cost we are able to give it a pressed out embossed border, so you have a choice. Please select your preference from the drop down menu. These novelty number  plates are made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish. They measure 37 x 13 cm, exactly the same as the traditional fully embossed type of plate and look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage the flat non-embossed version is that owing to the absence of embossed border, and being just under 1 mm thick, it’s quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces. Each embossed rim style plate is sealed in a clear plastic sleeve, and each flat non-embossed plate is shrink-sealed in plastic film, so both types are ready for retail display, plus we offer the option of fixing them to a cardboard display card, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. To see what the display card looks like please click here For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like plates made to your own design, we can easily do this for you. Virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a plate to your design please click here Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • UTE

      Extremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

    • UP YOUR KILT

      UP YOUR KILT is slang Scottish like "cheers" or "down the hatch" eg: "Up your kilt yah northern fairy".  Dixie offer this plate as a regular pressed embossed standard Aussie size  37cm x 13cm aluminium plate. It is available in two formats as follows: a) A sticker plate whereby the top two words are applied as a high quailty vinyl sticker and the bottom word is pressed embossed b) A regular pressed embossed plate with two lines of embossed characters 5cm high These plates are extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • UNFKNBLVBL

      The UNFKNBLVBL novelty number plate is one that the Aussie factory won't make this one for us, (a tad prudish perhaps) so we get them to supply blanks and do it ourselves by applying a sticker!  THE LETTERS ON THIS PLATE ARE NOT EMBOSSED, BUT THE PLATE BORDER IS EMBOSSED We offer 4 variations - please select your preference from the drop down menu They are standard size 37cm x 13cm or 37cm x 10cm aluminium plates. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  The sign can be hung inside or outside and each is pre-drilled so ready to hang. We sell for a great price and offer a wide variety so get yours today! BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition  

    • UIDIOT

      Available in a variety of colour combinations – please select from drop down menuExtremely high quality Australian manufactured Standard Size Number Plate. Made from Aluminium by the same company that’s been producing and selling quality Novelty Plates for many years.  Dixie’s plate sizes are the same as those on a normal vehicle,and have embossed characters and an embossed border.

    • TYRE WARMER

      The TYRE WARMER novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • TRUE BLUE

      TRUE BLUE is an Aussie expression immortalized in a folk song written and performed in 1981 by singer-songwriter John Williamson. Hey True Blue, don't say you've gone Say you've knocked off for a smoko And you'll be back la-ater on Hey True Blue, Hey True Blue Now do me straight, face to face Are you really disappearing Just another dying race Hey True Blue True Blue, is it me and you Is it Mum and Dad, is it a cockatoo Is it standin' by your mate when he's in a fight Oh well she'll be right True Blue, I'm a-asking you Hey True Blue, can you bear the load Will you tie it up with wire Just to keep the show on the road Hey True Blue Hey True Blue, now be Fair Dinkum Is your heart still there If they sell us out like sponge cake Do you really care Hey True Blue The TRUE BLUE novelty plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.

    • TRIUMPH

      Our TRIUMPH Aussie plates shown here are our standard stocked items - please make your choice of colours from the options menu. Other colours can be embossed and manufactured at a weeks noticeThis is a standard size 37cm x 13cm aluminium plate with embossed main characters. It is extremely high quality, durable and long lasting and we are proud to say that it is Australian manufactured by the same company that’s been producing and selling quality number plates for years.  They can be hung inside or outside and each is pre-drilled so ready to hang and also look very nice framed. We sell for a great price and offer a wide variety so get yours today!BONUS! – Each is supplied in a free clear plastic pocket with a display card ready for hanging on display in store. For protection from factory to customer each is freighted with extra packing materials to ensure they arrive at your store in tip-top condition

    • IF IT HAS TITS

      The IF IT HAS TITS novelty number plate is available in two formats – please select from the drop down menu As an Aussie made plate with an embossed rim - wording "If it has Tits or Wheels" As a flat non-embossed Aussie size novelty number plate - wording "If it has Tits or Tyres"The plate made in Australia measures 37cm x 13cm – the same as a standard size ‘real’ number plate. The Aussie manufacturer is the very same company that makes the ‘real’ plates, and they have been producing and selling quality Novelty Number Plates for many years.  The plates look the same as those on a normal vehicle, and have embossed characters and an embossed border. They can be hung inside or outside and each is pre-drilled so ready to hang and would look very nice framed.Each is supplied in a clear plastic sleeve with a hanging display card affixed so they are ready for in-store display. We sell for a great price and offer a wide variety so get yours today!  For protection in delivery each has extra packing materials to ensure they arrive in tip-top conditionPLEASE NOTE they are for decoration only as officially the authorities say  “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.”The flat non-embossed Aussie size novelty number plate, is unique and exclusive to Dixie. This type of novelty number plate is made from high quality aluminium and the artwork applied by a dye sublimation process with a lovely gloss finish.It too measures 37 x 13 cm, exactly the same as the traditional embossed type of plate so these signs look just like our other Aussie made novelty number plates; even the mounting holes are in exactly the same positions, so they can easily be hung on display indoors or outdoors. One great advantage these plates have over traditional plates, is that owing to the absence of embossed border, and being just under 1 mm thick, these are quite flexible and will flex about 10 cm from the centre, so can be mounted on curved surfaces.Each is shrink-sealed in plastic film and ready for retail display, plus we offer the (free) option of having the signs adhered to a 38 x 18 cm cardboard display card with double sided tape dots, so they can then be hung and displayed on the same display racks that are used for the other Aussie size plates we sell. 

    • TAS 4 EVER

      The TAS 4 EVER novelty number plate is the pressed embossed standard Aussie size  37cm x 13cm aluminium plate and extremely high quality, durable and long lasting and we are proud to say that it is manufactured in Queensland, Australia. Aussie states available in this series are ACT 4 EVER; NSW 4 EVER; NT 4 EVER; QLD 4 EVER; SA 4 EVER; TAS 4 EVER; VIC 4 EVER; WA 4 EVER - see website links below These novelty plates can be hung anywhere inside or outside as each is pre-drilled so ready to hang. PLEASE NOTE they are for decoration only as officially the authorities say “Attachment of a novelty number plate to a vehicle could attract the interest of law enforcement officers should it affect the visibility of, or distract from, or imply it is, the actual registration plate of the vehicle.” For protection during delivery we use extra packing materials to ensure they arrive in tip-top condition If you would like novelty plates made with your own choice of characters, we can easily do this for you within a few days. Just head on over to the link below for all the details of how to order a 'non-Graphic' two colour plate - CLICK HERE FOR CUSTOM MADE NON GRAPHIC PLATE DETAILS If you want a plate with a picture background then we can also do these types of plates for you - virtually anything you want can be created with our modern digital equipment.  The key is good art, and we can do ANY GRAPHIC!    ANY DESIGN!    ANY COLOUR! For more details on creating a picture background 'Graphic' plate (or sign) to your own design please CLICK HERE FOR CUSTOM MADE GRAPHIC PLATE DETAILS Important note about images we provide for novelty signs and plates: Just as we sometimes see that “pricing is subject to change without notice”, so too are “designs subject to change without notice”. In 99.99% of cases, what you see on Dixie’s website or brochure is what you get. However, there are the odd times when designs have changed in some small way (eg: maybe a logo moves to a different location on the item, or the colour changes). Sometimes this information doesn’t always trickle down until the new designs are manufactured and shipped to Dixie. We hope this is helpful and understandable.